DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Vents TwinFresh SA-60 Ventilator1 / 2
14 460 ₴
In Stock
1

Vents TwinFresh SA-60 Ventilator

SKU Вентс-ТвинФреш-СА-60

Description

Installation Description

The Vents TwinFresh SA-60 ventilator is a reversible ventilation unit with heat recovery. It is designed to provide supply and exhaust ventilation for an apartment, office, or other premises.

This energy-saving unit solves the following tasks:

  1. Continuous supply of fresh air;
  2. Heating savings in winter (retains heat inside the room);
  3. Cooling savings in summer (retains coolness inside the room);
  4. Solves the problem of high humidity: prevents mold formation
  5. incoming air from dust and other fine particles.

TwinFresh Ventilators — an effective tool in the fight against allergies. They help create a hypoallergenic environment at home: dust-collecting filters prevent allergens (down, pollen, dust) from entering. Air purification will help not only with allergies, but also with asthma or other respiratory diseases.

Ventilator Device

Fan. A reversible fan is used for air supply or extraction. This fan has very low energy consumption - no more than 3 W.

Recuperator. For transferring heat from the exhaust air to the supply air. Made of ceramics, it has a large contact area with air. The recuperator efficiency reaches 91%.

Filters. Designed to prevent dust, pollen, and other contaminants from entering the room, as well as to protect the ventilator itself from contamination.

The cartridge with the fan, recuperator, and filters is housed in a square telescopic duct, which is insulated externally to prevent heat loss and condensation formation.

Operating Principle

The ventilator can operate in the following modes:

  1. Reversible mode with heat regeneration (reversal occurs every 70 seconds)
  2. Exhaust ventilation
  3. Supply ventilation

The operation of the ventilator in reversible mode occurs as follows:

  • The fan operates in the room extraction mode, warm air from the room passes through a large number of recuperator openings and thereby heats it.
  • After 70 seconds, the fan stops and switches to the room air supply mode. Outdoor air begins to enter the room through the filters and recuperator.
  • Passing through the recuperator, the air heats up and enters the room already preheated.

When creating a ventilation system based on TwinFresh ventilators, one unit is installed in each room. In large rooms, it is recommended to install two ventilators. The ventilation mode for each individual room can be switched according to individual requirements. Air flows between rooms through doorways and corridors, thereby ensuring the necessary circulation throughout the dwelling.

Control

Control of the ventilators is carried out using a control and power unit with a capacity of 12 W. It is part of the TwinFresh SA-60 and combines the KVR/KVS control panel and the TRF 220/12-12 transformer in one housing.

Maintenance

It is necessary to clean the turbines annually with a soft dry brush or compressed air without using water. The frequency of filter cleaning may vary depending on the purity of the outdoor air and the frequency of use of the ventilators. As a rule, they need to be cleaned every 3-6 months. Filters are cleaned with a vacuum cleaner. When the performance of the ventilator decreases, it is necessary to replace the filters — 1-2 times a year.

Main Advantages

  • Energy-efficient fans: consumption up to 3 W;
  • Savings on heating and cooling of the premises;
  • Prevention of fungus and mold formation;
  • Purification of incoming air;
  • Silent operation maintenance.

Unit Installation

The ventilator is installed in an external wall from 255 to 475 mm thick in a pre-prepared opening. The plastic air duct can be cut both by calculating the required length and after fixing the air duct in the wall. The air duct is installed at an angle of 3 degrees towards the outside.

Installation Services from Eko Dim Company

Eko Dim company has the largest network of installation organizations in Ukraine for the installation of air recuperators: our representatives are located in all regional centers and large cities of Ukraine. Such a large network of installers allows us to install recuperators in almost any point of Ukraine. You can see a detailed list of cities where installation is carried out here.

The list of work on the installation of the recuperator includes:

  1. Diamond drilling of a hole in the wall;
  2. Installation of the recuperator;
  3. Commissioning works.

Advance booking for installation is carried out when ordering the recuperator or separately with the company's consultant by phone. Contact our sales consultant for all your questions: 0-800-331-765, 044-33-473-65, 098-61-555-15. We will do the installation promptly, efficiently, and reliably.

Package Contents

  • Ventilator
  • Control unit
  • Cable, 3 m (5x0.25)
  • User manual
  • style="text-align:left;">Installation kit

Vents TwinFresh Technical Passport

Specifications

Technical Specifications

Mounting hole diameter, mm
166
Remote control
yes
Housing material
Heat exchanger material
Presence of filter
yes

General Information

Model
Vents TwinFresh SA-60 Ventilator
SKU
Вентс-ТвинФреш-СА-60
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog