DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Climtec RD-250 Standard Recuperator1 / 2
25 268 ₴
In Stock
1

Climtec RD-250 Standard Recuperator

SKU РДЦ-250Стандарт

Description

Recuperator Description

Climtec RDC-250 Standard is a supply and exhaust ventilation system in which air supply and extraction occur simultaneously without mixing airflows. It is a decentralized ventilation unit with the option of connecting to a general ductwork system.

A recuperator is a heat exchanger. In winter, it recovers thermal energy leaving the room with the exhaust air, and in summer, it prevents heat from entering with the supply air. The heat recovery process can save up to 87% of the heat lost during conventional room ventilation.

To preserve the microclimate even during particularly severe frosts, an air-heating element is provided. It is located after the heat exchanger and heats the already warmed air, thereby combining maximum efficiency and low electricity consumption.

The model belongs to the semi-industrial "RDC" series and is used for ventilating large facilities: production workshops, warehouses, offices, shopping centers, restaurants, fitness clubs, swimming pools. It can also be applied in residential settings (private houses, apartments).

Operating Features

During recuperator operation, the outgoing and incoming air streams move toward each other through adjacent channels, passing through the aluminum heat exchanger and exchanging heat. The outgoing warm air stream gives up its heat to the heat exchanger, which heats the fresh outdoor air stream supplied to the room.

In addition, the unit is equipped with a heating element that ensures the supply of warm air even during severe frosts.

Thus, the Climtec RDC-250 Standard recuperator solves several tasks simultaneously in a complex manner:

  • organization of continuous air exchange;
  • removal of excess moisture;
  • provision of effective ventilation;
  • enhancement of air conditioning and heating system energy efficiency.

Installation Features and Operational Characteristics

The unit, with a length of 600 millimeters and a diameter of 250 millimeters, is mounted into the exterior wall of the room in a specially prepared hole with a diameter of 280 millimeters.

Regarding operational qualities, the Climtec RDC-250 Standard recuperator is characterized by:

  • presence of four air exchange speeds, selected using a remote control;
  • minimum and maximum power consumption levels of 11 and 160 watts, respectively;
  • noise level at maximum power of 45-48 decibels. At minimum power, the unit operates virtually silently;
  • ability to operate effectively at outdoor temperatures from -30 to +40 degrees.
  • Aluminum heat exchanger efficiency up to 87%.

Thus, the Climtec RDC-250 Standard recuperator can become the optimal solution for ensuring the most comfortable microclimatic conditions in a private house, office, exhibition hall, cafe, restaurant, warehouse, and other commercial premises.

Recuperator Installation

The recuperator features a single module, fully ready for installation. It is mounted in the upper part of the wall bordering the exterior, for which a through-hole of the appropriate diameter must be made. Hole diameters differ depending on the model. The working module of the recuperator is installed into the wall hole using mounting foam or another sealant. Thus, the entire working module is located within the wall thickness, and only the ventilation grilles remain on the outside: one inside the room and the other on the facade.

The through-hole is made with a 3-5 degree downward slope toward the outside to allow condensate to drain from the heat exchanger. To ensure normal operation of the ventilation system, its air intake pipe (from the outside) must protrude from the wall by at least 5 mm.

Installation Services

DLM has Ukraine's largest network of installation organizations for air recuperators: our representatives are located in all regional centers and major cities of Ukraine. Such a large network of installers allows us to install recuperators practically anywhere in Ukraine.

The list of recuperator installation works includes:

  1. Diamond core drilling of the wall hole;
  2. Recuperator installation;
  3. Commissioning works.

Scope of Supply

  • Ventilation system with recuperator
  • Product data sheet
  • Warranty card
  • Remote control
  • Packing box

Specifications

Technical Specifications

Mounting hole diameter, mm
270
Recuperator diameter, mm
250
Remote control
yes
Length from, mm
600
Efficiency, %
75
Control
remote control
Housing material
Plastic
Heat exchanger material
Aluminum
Additional heating
yes
Air exchange volume, m3
600
Room area, m2
up to 100
Filter availability
yes
Manufacturer country
Ukraine
Installation type
Horizontally

General Information

Model
Climtec RD-250 Standard Recuperator
SKU
РДЦ-250Стандарт
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog