DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Climtec RD-150 Standard Recuperator1 / 2
12 350 ₴
In Stock
1

Climtec RD-150 Standard Recuperator

SKU РД-150стандарт

Description

Climtec RD-150 Standard Recuperator

The universal Climtec RD150 Standard recuperator is an upgraded version compared to the RD-150 Base recuperator model. The STANDARD version already includes options such as: an air preheating heating element (TEN), an automatic shut-off valve upon power off, and a G3 filter. The Climtec RD150 Standard recuperator provides room ventilation for areas up to 40 m2 while ensuring complete replacement of the air volume with minimal heat losses.

The Climtec RD-150 Standard recuperator provides room ventilation and eliminates excessive humidity during the cold season (dampness and wet walls, window fogging, appearance of mold in corners).

Installing an air recuperator solves the following problems:

  • Dries the air and eliminates excessive humidity (damp walls, window fogging, etc.);
  • Provides room ventilation and refreshes the air volume;
  • Depressurizes the room after installing plastic windows;
  • Reduces heat losses to a minimum during room ventilation;

Operating Principle:

The Climtec RD-150 recuperator operates continuously; air supply and extraction occur simultaneously. Two fans with a heat exchanger between them create oppositely directed air flows (supply and extraction). Passing through the heat exchanger via adjacent channels without mixing, they exchange heat. The warm room-temperature air volume (exhausted from the room) transfers its heat through the walls of the heat exchanger to the colder incoming fresh air flow from the street. Thus, the fresh air entering the room is warmed up. The Climtec recuperator features a counter-flow aluminum heat exchanger with an efficiency of up to 93%.

Control:

To configure the operating mode, turn the device on and off, a remote control is provided. Light indication on the front panel of the device indicates the current operating mode. The following operating modes are available:

  • Ventilation mode with heat recovery. 4 speeds: 25%, 50%, 75%, 100%;
  • Extraction only: 25%, 50%, 75%, 100%;
  • Supply only: 25%, 50%, 75%, 100%;

In ventilation mode with recovery, the maximum performance of the unit is 100 m3/h, and at minimum speed it is 25 m3/h. When the Climtec RD-150 Standard recuperator is turned off, complete automatic closure of the channel occurs.

Technical Specifications of Climtec RD-150 Standard

  • Heat exchanger efficiency up to 93%;
  • Maximum ventilation volume: up to 100 m3/h;
  • Recommended placement area: up to 40 m2;
  • Mounting hole diameter: 162-172 mm;
  • Recuperator length: 500-1000 mm;
  • Noise level at maximum mode: up to 38 dB;
  • Operating temperature range: -20C ... +45C.
  • Power consumption including the preheating heating element: up to 170 W;
  • Channel shut-off valve: automatic channel closure when the device is turned off;
  • Air preheating heating element - Ceramic, air type (140-150 W);
  • Air filter – standard G3 class;
  • Installation location: In a wall opening;
  • Control: Remote control;
  • Recuperator warranty 24 months.

Advantages of the RD-150 Standard Model:

  • Ceramic air heating element;
  • G3 class air filter;
  • Light indication of operation mode on the front panel;
  • Automatic shut-off valve when the device is turned off.

Recuperator Installation

The recuperator has a single module, completely ready for installation. The recuperator is mounted in the upper part of the wall bordering the street. To do this, it is necessary to make a through hole to the street of the appropriate diameter. The hole diameters vary depending on the model. The working module of the recuperator is installed in the wall opening using polyurethane foam or another sealant. Thus, the entire working module is located within the wall thickness, and only the ventilation grilles remain on the outside: one inside the room, and the other on the facade. The through hole is made at an inclination of 3-5 degrees towards the street to allow condensate to drain from the heat exchanger. To ensure normal operation of the ventilation system, it is necessary that its air intake stub (from the street side) protrudes from the wall by at least 5 mm.

Installation Services

DLM has the largest network of installation organizations for air recuperators in Ukraine: our representatives are located in all regional centers and large cities of Ukraine. Such a large network of installers allows us to install recuperators practically anywhere in Ukraine.

The list of recuperator installation works includes:

  1. Diamond core drilling of a wall hole;
  2. Recuperator installation;
  3. Commissioning works.

Scope of Supply

  • Ventilation system with recuperator;
  • Product passport;
  • Warranty card;
  • Remote control;
  • Packaging box.

Specifications

Technical Specifications

Mounting hole diameter, mm
162
Recuperator diameter, mm
150
Remote control
yes
Length from, mm
500
Efficiency, %
93
Control
Remote control
Housing material
Plastic
Heat exchanger material
Aluminum
Additional preheating
yes
Air exchange volume, m3
100
Room area, m2
up to 40
Filter availability
yes
Manufacturer country
Ukraine
Installation type
Horizontally

General Information

Model
Climtec RD-150 Standard Recuperator
SKU
РД-150стандарт
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog