DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Vents Solo RA1-35-9 R Ventilator
4 347 ₴
In Stock
1

Vents Solo RA1-35-9 R Ventilator

SKU Вентс-Соло-РА1-35-9-Р

Description

Installation Description

Vents Solo RA1-35-9 R Ventilator (Domovent) - a reversible ventilation unit with heat recovery. Designed to provide supply and exhaust ventilation for a room, apartment, office, or other premises. Used in cases where it is not possible to install a ventilation system with ductwork.

Such an energy-saving unit solves the following tasks:

  1. Constant supply of fresh air;
  2. Savings on heating in winter (keeps heat inside the room);
  3. Savings on cooling in summer (keeps coolness inside the room);
  4. Solves the problem of high humidity: prevents mold formation and filters incoming air from dust and other fine particles.

Vents Solo Ventilators - an effective means in the fight against allergy. Air purification will help not only with allergies, but also with asthma or other respiratory tract diseases.

Design and Operating Principle

Filters, a heat exchanger, and a fan are placed inside the plastic channel of the Vents Solo RA1-35-9 R. An external hood is installed on the channel from the street side, and a front grille from the room side.

Fan. A reversible axial-type fan with an EC motor is used. The motor uses ball bearings with a service life of 20,000 hours. Thanks to the use of an EC electric motor, the ventilator has low power consumption - only 1.92 W per hour. Overheat protection is also installed, which automatically turns off the fan if the maximum temperature is exceeded.

Heat Exchanger. The system uses a ceramic heat exchanger with a heat recovery efficiency of up to 85%. It is a cylinder with a large number of small cross-section holes.

Filters. Two circular cross-section filters are installed in the Solo ventilator. The filter installed on the street side cleans the supply air from dust and insects; another filter protects the heat exchanger from the room side. Filtration class G3. Filters need to be periodically cleaned to maintain performance and protect the device from clogging.

The operation of the ventilator is based on the reversible operation of the fan and heat exchanger:

  • The fan operates in extract mode from the room, warm air from the room passes through the numerous holes of the heat exchanger and thereby heats it.
  • After 70 seconds, the fan stops and switches to the air supply mode to the room. Street air begins to flow into the room through the filters and heat exchanger.
  • Passing through the heat exchanger, the air heats up and enters the room already warmed up.

Such switching between supply and exhaust modes occurs automatically every 70 seconds.

Control

The low price of the device is explained by simplified control: a switch is located on the power cord, and the fan speed can be changed using a pull-cord switch.

Maintenance

Maintenance consists of cleaning the filters and the heat exchanger.

Filters. They should be cleaned once every 3 months (or as they clog) with a vacuum cleaner. At a high degree of clogging, they can be rinsed with water. Filter service life is 3 years. If the filter fails, you can order a new filter from the equipment seller.

Heat Exchanger. At least once a year, the heat exchanger must be cleaned using a vacuum cleaner.

Main Advantages

  • Fan consumption only up to 1.89 W;
  • Low price thanks to simplified control;
  • Savings on heating and cooling the room;
  • Prevention of fungus and mold formation;
  • Low noise level (27-32 dBA);
  • Easy maintenance;
  • Built-in overheat protection.

Unit Installation

The ventilator is installed in an external wall with a thickness of 305-380 mm in a pre-prepared opening. The plastic air duct can be cut either after calculating the required length or after fixing the air duct in the wall. The air duct is installed at a 3-degree angle towards the street.

Installation Services from Eco Dim Company

Eco Dim company has the largest network of installation organizations in Ukraine for the installation of air recuperators: our representatives are located in all regional centers and large cities of Ukraine. Such a large network of installers allows us to install recuperators almost anywhere in Ukraine. You can see a detailed list of cities where installation is carried out here.

The list of recuperator installation works includes:

  1. Diamond core drilling of the hole in the wall;
  2. Recuperator installation;
  3. Commissioning works.

Preliminary registration for installation is carried out when ordering the recuperator or separately with the company's consultant by phone. Contact our sales consultant for all your questions: 0-800-331-765, 044-33-473-65, 098-61-555-15. We will perform the installation promptly, efficiently, and reliably.

Package Contents

  • Ventilator;
  • Mounting bracket;
  • Foam wedges;
  • Foam rubber;
  • User manual;
  • Packaging box.

Specifications

Technical Specifications

Mounting hole diameter, mm
166
Air duct diameter, mm
150
Remote control
no
Wall thickness, mm
305
COP / Efficiency, %
85
Control
Remote control
Housing material
Plastic
Heat exchanger material
Ceramics
Additional heating
no
Air exchange capacity, m3/h
50
Noise level, dB
up to 15
Filter presence
yes
Manufacturer country
Ukraine
Installation type
Horizontally

General Information

Model
Vents Solo RA1-35-9 R Ventilator
SKU
Вентс-Соло-РА1-35-9-Р
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog