Climtec RD-100 Standard Recuperator
Climtec
7,480 ₴
1 / 2SKU Prana-200C-ECO-ENERGY
The Prana recuperator is a supply and exhaust counterflow ventilation system where supply and extraction operate simultaneously without mixing air flows. Thanks to this design, the system ensures a constant supply of fresh air while retaining heat indoors.
The model belongs to the semi-industrial series and is used in public facilities: catering establishments, entertainment and educational institutions, office spaces, call centers, health and wellness resorts, saunas, hotel and tourist complexes, and religious buildings (churches). The length of the working module's duct is manufactured according to the thickness of the wall in which the recuperator will be installed (from 500 mm).
Operating Principle
Supply and exhaust air flows pass through the channels of the copper heat exchanger without mixing with each other. Stale warm air is removed from the room, heating the incoming cold air through the walls of the heat exchanger. In summer, the incoming air is cooled instead. This process is called recuperation. Thanks to the Prana recuperator, the system's heat recovery efficiency reaches up to 93%.
The PRANA recuperator is an optimal ventilation choice for allergy sufferers and asthmatics. The copper heat exchanger inside the recuperator sanitizes outdoor air containing harmful microorganisms (bacteria, viruses, mold spores), reducing the risk of upper respiratory tract infections. The design of the internal and external ventilation grilles provides additional protection for the ventilation system against rain, leaves, and poplar fluff, and also allows completely shutting off air flows when necessary.
For the most effective purification of incoming air, the system is equipped with reusable G2-G3 class coarse filters: they trap fluff, soot, large dust particles, and insects. The filters are made of reticulated polyurethane foam, allowing them to be reused after thorough cleaning.
Prana recuperators are noted for quiet operation: in the semi-industrial series, the noise level at a distance of 3 meters is from 15 dB. Due to the special geometry of the heat exchanger channels, the noise level is reduced by 7-8 times compared to the initial level.
The system of external and internal sensors (on the control board) provides real-time information on indoor air status:
Intelligent "Auto" operating mode provides automatic control without human intervention, guided by sensor data. This is the optimal operating option for the recuperator, as in this mode the system is most efficient, energy-saving, and autonomous.
The "mini-heater" function allows using the recuperators during the cold season. It expands the temperature operating range of the system down to -30 °C: raising the supply air temperature by 6-7 °C and preventing icing of the recuperator heat exchanger and fans.
The "winter mode" function prevents condensate drainage from freezing in cold weather and thaws it if it occurs. To ensure correct operation of the recuperator at sub-zero temperatures, using "Winter mode" is mandatory.
Additional accessories have been developed for the semi-industrial series of Prana recuperators to help protect the system from drafts, conceal potential drilling defects, and blend the recuperator into the room interior. Purchased separately, please check prices with your manager.
Check valve. Serves as protection against system drafts. It is a plastic ring with a movable membrane designed to prevent air flow direction reversal.
Wind protection cover. An external metal cover designed to counteract system drafting. Installed on floors above the 4th and in areas with intense winds.
Facade decorative ring. A metal ring designed to conceal chips and defects during drilling. Installed on the exterior of the recuperator.
G2/G3 class filter. Traps mechanical particles, fluff, dust, and plant pollen. Designed for reusable application. As the filter gets dirty, it is sufficient to rinse it with warm running water, and after drying, it is ready for use again.
Colored covers. Optionally, front and rear recuperator covers can be manufactured in various colors upon order.

The system is controlled via the included remote control or a mobile application. Using a smartphone, you can control the recuperator within the room via Bluetooth or from anywhere in the world using Wi-Fi.
The functional Prana Online smartphone app provides the following capabilities:
The recuperator is mounted in the upper part of a wall bordering the outdoors. A through-hole is cut using diamond core drilling, into which the working module is installed using mounting foam or another sealant. Thus, the entire working module is contained within the wall thickness, while only the ventilation grilles remain on the outside: one indoors and the other on the facade.
The through-hole is made with a 3-5 degree downward slope toward the street to allow condensate to drain from the heat exchanger. To ensure normal operation of the ventilation system, its air intake branch pipe (on the street side) must protrude from the wall by at least 5 mm.

The ventilation system connects to a stationary 220V power grid. Installation of the PRANA household series takes an average of 1-2 hours.
Eco Dim Company has Ukraine's largest network of installation organizations for air recuperator setup: our representatives are located in all regional centers and major cities of Ukraine. Such a vast installer network allows us to install recuperators practically anywhere in Ukraine. You can see a detailed list of cities where installation is performed here.
The list of recuperator installation works includes:
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.