Climtec RD-100 Standard Recuperator
Climtec
7,480 ₴
1 / 2SKU Prana-150-ECO-LIFE
Prana recuperator is a supply and exhaust counterflow ventilation system in which the supply and exhaust operate simultaneously without mixing air flows. Due to this design, the system ensures a continuous supply of fresh air while retaining heat indoors.
The model is used in residential and commercial facilities: private houses, apartments, office spaces, educational and preschool institutions. The length of the working module channel is manufactured according to the wall thickness where the recuperator will be installed (from 450 mm).
Operating Principle
Supply and exhaust air flows pass through the channels of the copper heat exchanger without mixing with each other. Stale warm air is removed from the room, heating the incoming cold air through the heat exchanger walls. In summer, the incoming air is cooled instead. This process is called heat recovery. Thanks to the Prana recuperator, the system heat recovery efficiency reaches 95%.
The PRANA recuperator is the optimal ventilation choice for allergy sufferers and asthmatics. The copper heat exchanger inside the recuperator disinfects outdoor air containing harmful microorganisms (bacteria, viruses, mold spores), reducing the risk of upper respiratory tract infections. The design of the internal and external ventilation grilles provides additional protection for the ventilation system against rain, leaves, and poplar fluff, and also allows completely shutting off air flows when necessary.
For the most efficient purification of incoming air, the system is equipped with reusable G2-G3 class coarse filters: they trap fluff, soot, large dust particles, and insects. The filters are made of reticulated polyurethane foam, allowing them to be reused after thorough cleaning.
Prana recuperators feature quiet operation: in the residential series, the noise level at a distance of 3 meters is from 14 dB. Due to the special geometry of the heat exchanger channels, the noise level is reduced by 7-8 times compared to the initial level.
The system of external and internal sensors (on the control board) provides real-time information about indoor air quality:
Intelligent "Auto" operating mode performs automatic control without human intervention, guided by sensor information. This is the optimal operating option for the recuperator, as in this mode the system is most efficient, energy-saving, and autonomous. In addition, in the Eco Life series, the "Auto" mode helps prevent carbon monoxide poisoning in homes with fireplaces, gas, or stove heating.
"Mini-heater" function allows using recuperators during the cold season. It expands the temperature range of the system application down to -30 °C: raises the supply air temperature by 6-7 °C, preventing icing of the recuperator heat exchanger and fans.
"Winter mode" function prevents condensate drainage freezing in the cold season, defrosting it if necessary. To ensure correct operation of the recuperator at sub-zero temperatures, using "Winter mode" is mandatory.
Additional accessories have been developed for the Prana residential series of recuperators to help protect the system from drafts, conceal possible drilling defects, and blend the recuperator into the room interior. Purchased separately, check prices with the manager.
Check valve. Serves as protection against system backdrafting. It is a plastic ring with a movable membrane designed to prevent changes in air flow direction.
Windproof cover. An external metal cover designed to counteract system drafting. Installed on floors above the 4th and in areas with intense wind.
Facade decorative ring. A metal ring designed to conceal chips and defects from drilling. Mounted on the exterior of the recuperator.
G2/G3 class filter. Traps mechanical particles, fluff, dust, and plant pollen. Designed for reuse. As it gets dirty, simply rinse the filter with warm running water, and after drying, it is ready for use again.
Colored covers. Optionally, front and rear covers of the recuperator can be manufactured in various colors upon request.

The system is controlled via the included remote control or through a mobile application. Using a smartphone, you can control the recuperator within the room via Bluetooth or from anywhere in the world via Wi-Fi.
The functional Prana Online smartphone application provides the following capabilities:
The recuperator is mounted in the upper part of the wall bordering the outside. A through-hole is cut using diamond core drilling, into which the working module is installed using mounting foam or another sealant. Thus, the entire working module is located within the wall thickness, and only the ventilation grilles remain visible on the outside: one inside the room, and the other on the facade.
The through-hole is made with a 3-5 degree slope towards the outside to allow condensate to drain from the heat exchanger. To ensure normal operation of the ventilation system, its air intake branch pipe (from the outside) must protrude from the wall by at least 5 mm.

The ventilation system is connected to a stationary 220 V mains supply. Installation of the PRANA residential series takes an average of 1-2 hours.
Eco Dim company has the largest network of installation organizations in Ukraine for air recuperator installation: our representatives are located in all regional centers and large cities of Ukraine. Such an extensive network of installers allows us to install recuperators practically anywhere in Ukraine. You can see a detailed list of cities where installation is performed here.
The list of recuperator installation works includes:
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.