The Wechsel Voyager TL is currently one of the few tents that is fully suitable for both camping and group backpacking trips. It is the lightest full-featured four-person tent with a height of 190 cm and a large vestibule. Thus, it is easy to carry on your shoulders during a hike, while providing maximum comfort when used for camping.
For camping use, an interesting feature is the privacy curtain that divides the inner tent into two separate rooms. The tent features a spacious vestibule where you can set up a folding table with four chairs, a camp kitchen, or a couple of extra cots. A large number of interior and exterior pockets allows you to store a significant amount of useful camping gear.
For group backpacking trips, the tent is appealing because, with a trail weight of less than 6 kg, it comfortably accommodates at least 4 people for overnight stays. When bad weather requires cooking dinner for a group, only a tent with a large and high vestibule can handle this task, sheltering up to 12 people from the elements during meals.
The outer flysheet is pitched first, after which the inner tent is clipped inside it. This speeds up the pitching process and prevents the inner tent from getting wet when pitching in the rain. The first setup of the tent will be quite quick and hassle-free, as the inner tent is already pre-attached to the outer flysheet at the factory. The polyurethane coating of the flysheet and tent floor provides waterproof protection up to 7,000 mm and high puncture resistance, which is extremely important when using the tent in both forested and rocky terrain. The tent features only mesh ventilation inserts, making it recommendable for camping and hiking in colder climatic conditions.

If your sole goal is not to acquire the absolute lightest gear or gear intended for the most extreme conditions, but you prefer functional and comfortable equipment, then the Wechsel Travel Line gear series will definitely catch your eye. During the development of the Travel Line series tents, primary focus was placed on usage comfort, ease and speed of pitching and packing, and achieving maximum interior space while maintaining a minimal footprint. At the same time, all models in the Wechsel Travel Line series are undeniably reliable tents capable of withstanding harsh weather conditions and satisfying the demands of both ambitious mountaineers and weekend backpackers.
Specifications:
- Type: Tent
- Shape: Tunnel
- Capacity: 4 persons
- Total number of exits / rooms: 1 / 3
- Construction: Double-wall
- Vestibule presence / quantity: Yes / 1
- Frame: Alu 7001 T6 aluminum alloy (2 poles - ∅ 11.5 mm, 12 sections; 1 pole - ∅ 11.5 mm, 10 sections), end tips ∅ 6.5 mm
- Outer flysheet material: Polyester 68D Ripstop PU DWR, 5,000 mm hydrostatic head, taped seams, Ripstop reinforcing structure, polyurethane coating and water-repellent finish, density - 81 g/m², tear strength - 2.5 kg
- Inner tent material: Polyester Taffeta 70D 185T DWR, taped seams, water-repellent breathable fabric, density - 58 g/m²
- Floor material: Polyester 75D 210T PU DWR, 7,000 mm hydrostatic head, taped seams, water-repellent finish, density - 110 g/m²
- Mosquito net material: Polyester NoSeeUm 20D DWR
- Intended use: Camping, hiking/backpacking
- Color: Laurel Oak
Dimensions and Weight:
- Inner tent (L x W x H): 220 x 235 x 190 cm
- Outer tent (L x W x H): 445 x 245 x 195 cm
- Packed dimensions: 60 x 28 x 28 cm
- Tent weight (without stuff sack, repair kit, and pegs): 5.87 kg
- Tent weight (fully equipped): 6.36 kg
Design Features:
- The main advantages of the tunnel construction with an end vestibule are the most efficient use of interior tent space, near-vertical side walls, and the most spacious vestibule compared to other designs. This design features a low weight-to-volume ratio and requires minimal pitching time.
- The frame with the outer flysheet is pitched first, after which the inner tent is attached from the inside. This setup method keeps the inner tent dry when pitching in the rain, and reduces pitching/packing time provided the inner tent is left clipped inside and not removed during teardown. The outer flysheet attaches to the frame using sleeves.
- The inner tent can be divided by a privacy curtain into two separate rooms, one of which comfortably accommodates two adult users, while the other accommodates two teenagers or one adult user.
- The maximum ceiling height of the inner tent is 190 cm, allowing most users to stand freely inside the tent.
- The doors of the inner and outer tents are partially equipped with mosquito netting.
- The mosquito net on the outer doors features two flaps positioned so that one can be opened from the outside and the other from the inside.
- Frame poles feature color coding that matches the color coding of the sleeves on the inner tent. Buckles are also color-coded, helping to quickly and accurately pitch the tent in the field. The poles are engineered and tensioned so precisely that they seem to assemble themselves after being removed from the stuff sack.
- The tent features 2 smaller and 1 large APEX ventilation valve, located in a triangle around the perimeter of the tent. This ensures proper ventilation of the inner tent and outer flysheet, prevents condensation buildup, and regulates internal temperature. The valves are secured with a rigid Velcro fastener, preventing unwanted noise even in gusty winds.
- In areas subject to maximum stress, the flysheet features reinforcements made of a stronger Ripstop fabric, which is especially important for polyurethane-coated flysheets. The triangular reinforcements evenly distribute applied forces across the entire area of the flysheet.
- The inner tent attaches to the outer flysheet with practical hardware that allows you to increase tension when needed, or easily replace hardware with new ones in emergency situations.
- Guy-line tension control is implemented using specially designed hardware. The guy line is securely fixed, and adjusting tension does not require changing the position of the pegs—simply slide the tensioner on the guy line.
- On the outside of the inner tent, there is a vertical panel with spacious pockets, while inside the tent, side mesh pockets along the walls are provided for storing small and bulkier items.
- The yellow guy lines feature an interwoven reflective thread, making them clearly visible during daylight and at night under a flashlight beam. A special flag with a Velcro fastener is fixed on the guy lines, securing the folded guy lines in the transport position and acting as a signal flag for quick visual detection of the pitched tent's guy lines. More reliable two-point guy lines are used on the sides of the tent, significantly increasing tension quality and flysheet stability.
- Double loops on the bottom hem of the flysheet provide necessary fixation variability, which is crucial for quality flysheet tensioning when pitching the tent on rocky ground where pegs can only be fixed in specific clear spots.
- The tent's stuff sack is made of the same material as the flysheet, making it lightweight, durable, and securely protective of its contents.
Materials:
- Alu 7001 T6 - a high-strength hardened aluminum-based alloy. Its primary composition of Al-Zn-Mg-Cu and thermal tempering provide higher strength, a higher modulus of elasticity, and the lowest residual deformation coefficient compared to other popular aluminum alloys. In terms of strength-to-weight ratio, Alu 7001 T6 outperforms steel and titanium alloys. Today, this aluminum alloy is the standard for manufacturing the most reliable and lightweight tent frames.
- Polyester 68D 190T Ripstop PU DWR, 5,000 mm hydrostatic head - a fairly lightweight fabric with a thread thickness of 68D, density of 190T, weight of 81 g/m², and tear strength of 2.5 kg. The increased tear strength is due to the Ripstop weave structure, and high puncture resistance is achieved through the polyurethane coating. The fabric's resistance to moisture penetration corresponds to a hydrostatic pressure rating of 5,000 mm of water column. The DWR finish has hydrophobic properties, preventing moisture accumulation and subsequent fabric wetting. The fabric has adequate UV resistance and does not stretch over time.
- Polyester Taffeta 70D 185T DWR - a wear-resistant, smooth, breathable fabric with a thread thickness of 70D and density of 185T. The DWR finish has hydrophobic properties, preventing condensation moisture buildup and subsequent fabric wetting. The fabric breathes exceptionally well, does not stretch over time, and is resistant to UV radiation and high temperatures.
- Polyester 75D 210T PU DWR, 7,000 mm hydrostatic head - a durable fabric with a thread thickness of 75D, density of 210T, and weight of 110 g/m². Thanks to the polyurethane coating, the fabric's resistance to moisture penetration corresponds to a hydrostatic pressure rating of 7,000 mm of water column. This same polyurethane coating provides high puncture resistance, which is essential for the tent floor material. The DWR finish has hydrophobic properties, preventing moisture accumulation and subsequent wetting. The fabric has adequate UV resistance and does not stretch over time.
- Polyester NoSeeUm 20D DWR - the special NoSeeUm mesh weave creates 1,054 holes per square inch, guaranteeing protection against any insects while avoiding visual obstruction when looking outside from inside the tent. The mesh uses 20D threads, is UV-resistant, and has a water-repellent finish.
- YNS Hardware - Travel Line series tents use YNS plastic hardware. With 46 patents for innovative inventions, the company manufactures high-quality hardware exclusively for outdoor products. The quality of this hardware is on par with products from more renowned American and Japanese brands.
Standards Compliance:
- ISO 811-1981 - an international standard confirming the declared waterproof rating of the tent material. Hydrostatic pressure testing of the material is performed to determine resistance to water penetration.
- ISO 13937-4 - a standard that determines fabric tear resistance for double tearing. A fabric strength level of 2.5 kg means that a force of 2.5 kg must be applied in opposite directions to an already initiated tear to propagate it further. A strength of 2.5 kg is an excellent indicator for medium-density polyurethane-coated polyester tent fabrics.
Kit Contents:
- Outer flysheet - 1 pc.
- Inner tent - 1 pc.
- Privacy curtain - 1 pc.
- Folding aluminum poles - 3 pcs.
- Pegs (aluminum) - 18 pcs.
- Guy lines with signal packing flags - 10 pcs.
- Repair kit (for poles and tent) - 1 pc.
- Stuff sack made of Polyester 68D Ripstop PU DWR fabric with handle - 1 pc.
- Assembly instructions (stitched into the stuff sack)
Operation and Maintenance Guidelines for Extended Service Life:
- It is advised not to pack the tent wet into its stuff sack. If it is impossible to dry the tent completely, this must be done at the first available opportunity.
- The use of any chemical solvents or aggressive stain removers for cleaning the tent is strictly prohibited. It is recommended to use mild soap, water, and a soft sponge.
- After using the tent, the frame poles and pegs should be cleaned of dirt with a damp sponge, wiped with a dry cloth, and packed into their respective stuff sacks.
- The tent must be stored in a well-ventilated, dry room, preferably outside its stuff sack.
- Washing and deep cleaning of the product are permitted only in accordance with the recommendations indicated on the tent's care label.
Manufacturer: Wechsel (Germany)
Warranty Period: 2 years