DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Tent Wechsel Aurora 1 TL Laurel Oak (231065)1 / 10
12 160 ₴
In Stock
1

Tent Wechsel Aurora 1 TL Laurel Oak (231065)

SKU DAS800

Description

At first glance, it might seem that the Wechsel Aurora 1 is a bit heavy for a single-person tent; however, it is virtually the only single-person tent featuring 6 full guy lines (rather than 2 or 4 like most similar models), 4 large ventilation flaps (instead of the two-flap layout used by many manufacturers), and a wealth of useful hardware for more convenient and versatile usage. The outer fly is pitched first, after which the inner tent is attached inside. This speeds up the pitching process and prevents the inner tent from getting wet when setting up in the rain. The initial setup is quite quick and hassle-free, as the inner tent is pre-attached to the fly. The entrance door can be used as an awning over the vestibule. The Wechsel Aurora 1 provides a spacious sleeping area. The polyurethane coating of the fly and floor ensures waterproof ratings up to 7000 mm and high puncture resistance, which is critical when using the tent in both forested and rocky terrain. The tent features a slightly tapered aerodynamic shape, requires minimal footprint space, and has no mesh inserts inside, making it recommended for moderate-zone winter trekking.

Travel Line

If your exclusive goal is not to acquire the absolute lightest gear or gear for the most extreme conditions, but you prefer functional and comfortable equipment, then the Wechsel Travel Line gear series will certainly catch your attention. During the development of the Travel Line series, primary focus was placed on ease of use, setup and pack-down speed and convenience, as well as maximizing interior space while minimizing the tent footprint. At the same time, all models in the Wechsel Travel Line are undeniably reliable tents capable of withstanding challenging weather conditions and satisfying the demands of both ambitious mountaineers and weekend backpackers.

Specifications:

  • Type: Tent
  • Shape: Tunnel
  • Capacity: 1 person
  • Total exits / rooms: 1 / 1
  • Construction: Double-wall
  • Vestibule presence / quantity: Yes / 1
  • Frame: Alu 7001 T6 aluminum alloy, ∅ 9.5 mm, end tips ∅ 8.6 mm (1 pole - 6 sections, 1 pole - 8 sections)
  • Flysheet material: Polyester 68D Ripstop PU DWR, 5000 mm hydrostatic head, taped seams, Ripstop reinforcing structure, polyurethane coating and water-repellent treatment, density - 81 g/m², tear strength - 2.5 kg.
  • Inner tent material: Polyester Taffeta 70D 185T DWR, taped seams, water-repellent breathable fabric, density - 58 g/m²
  • Floor material: Polyester 75D 210T PU DWR, 7000 mm hydrostatic head, taped seams, water-repellent treatment, density - 110 g/m²
  • Mosquito net material: Polyester NoSeeUm 50D DWR
  • Intended use: Tourism, cycle touring, weekend hiking
  • Color: Laurel Oak

Dimensions and Weight:

  • Inner tent (L x W x H): 235 x 90 x 93 cm
  • Outer tent (L x W x H): 235 x 140 x 93 cm
  • Packed dimensions: 55 x 17 x 17 cm
  • Tent weight (without stuff sack, repair kit, and stakes): 2.05 kg
  • Tent weight (fully equipped): 2.3 kg

Design Features:

  • The main advantages of a tunnel construction with a lengthwise vestibule are the minimal footprint combined with maximum utilization of interior space. This design is lightweight and requires minimal setup time.
  • The frame and outer fly are pitched first, after which the inner tent is clipped in from inside. This pitch method keeps the inner tent dry during rain setup and reduces setup/pack-down time provided the inner tent is pre-attached and left in place during teardown. The fly attaches to the frame via sleeves.
  • A mosquito net is integrated into the upper half of the inner tent door.
  • Enlarged sleeping area length and width significantly exceed standard minimum requirements, increasing usable space and making it very spacious for a single person.
  • Frame poles feature color-coding matching the sleeve color-coding on the inner tent. Buckles are also color-coded for quick, error-free field setup. The poles are so precisely fitted and tensioned that they seem to assemble themselves upon removal from the sack.
  • Unlike many single-person tents, this model boasts full ventilation. It features 4 large APEX ventilation flaps located along the outer sides of the poles. This ensures proper ventilation of both inner and outer tents, prevents condensation build-up, and regulates internal temperature. Vents are secured with rigid Velcro fasteners to prevent unwanted flapping even in gusty winds.
  • High-stress areas feature overlays made of stronger Ripstop fabric, which is especially important for polyurethane-coated flies. The triangular overlays evenly distribute loads across the entire fly surface.
  • The entrance door features specialized hardware allowing it to be used as an awning by utilizing trekking poles as supports and securing them with guy lines.
  • The inner tent attaches to the fly with practical hardware allowing tension adjustment if needed, or easy replacement in emergency scenarios.
  • Guy line tension control is implemented via specialized hardware. The guy line is securely locked, and adjusting tension requires no peg relocation—simply slide the tensioner on the guy line.
  • A voluminous mesh pocket inside the tent is designed for storing small items as well as stowing the tent door.
  • Yellow reflective guy lines remain clearly visible during daylight and at night under flashlight illumination. A special Velcro flag secures folded guy lines in storage and acts as a signal flag for fast visual detection of the pitched tent's guy lines.
  • Double lower-hem loops provide necessary fixing variance, essential for proper fly tensioning on rocky terrain where pegs can only be fixed at specific non-rocky points.
  • The tent stuff sack is made of the same material as the fly, making it lightweight, durable, and protective of the contents.

Materials:

  • Alu 7001 T6 - High-strength hardened aluminum-based alloy. Its primary composition of Al-Zn-Mg-Cu and temper treatment provide higher strength, a higher elastic modulus, and the lowest residual deformation coefficient compared to other popular aluminum alloys. In strength-to-weight ratio, Alu 7001 T6 outperforms steel and titanium alloys. Today, this aluminum alloy is the standard for manufacturing the most reliable and lightweight tent frames.
  • Polyester 68D 190T Ripstop PU DWR, 5000 mm hydrostatic head - A relatively lightweight fabric with 68D thread thickness, 190T density, 81 g/m² weight, and 2.5 kg tear strength. Enhanced tear strength is achieved through the Ripstop weave structure, while high puncture resistance comes from the polyurethane coating. Water penetration resistance corresponds to a 5000 mm hydrostatic head. The DWR treatment provides hydrophobic properties, preventing moisture accumulation and subsequent fabric wetting. The fabric has adequate UV resistance and does not sag over time.
  • Polyester Taffeta 70D 185T DWR - Wear-resistant, smooth, breathable fabric with 70D thread thickness and 185T density. DWR treatment provides hydrophobic properties, preventing condensation buildup and fabric wetting. The fabric breathes exceptionally well, resists sagging over time, and withstands UV radiation and high temperatures.
  • Polyester 75D 210T PU DWR, 7000 mm hydrostatic head - Durable fabric with 75D thread thickness, 210T density, and 110 g/m² weight. With its polyurethane coating, water resistance corresponds to a 7000 mm hydrostatic head. The same polyurethane coating provides high puncture resistance, crucial for tent floor material. DWR treatment provides hydrophobic properties, preventing moisture accumulation and fabric wetting. The fabric has adequate UV resistance and does not sag over time.
  • Polyester NoSeeUm 50D DWR - Special NoSeeUm mesh weave creates 1054 holes per square inch, guaranteeing protection against any insects while avoiding visual mesh glare when looking outside from within the tent. 50D thread mesh is UV-resistant and features a water-repellent treatment.
  • YNS Hardware - Travel Line series tents use YNS plastic hardware. With 46 patents for innovative inventions, the company manufactures high-quality hardware exclusively for outdoor gear. The quality matches that of more renowned American and Japanese brands.

Standard Compliance:

  • ISO 811-1981 - International standard confirming the declared waterproof rating of the tent material. Hydrostatic pressure tests determine resistance to water penetration.
  • ISO 13937-4 - Standard defining fabric tear resistance. A 2.5 kg strength level means a 2.5 kg force applied in opposite directions is required to propagate an existing tear. A 2.5 kg strength is an excellent rating for medium-density polyurethane-coated polyester tent fabrics.
  • ISO 5912:2011 - International standard defining tent sleeping area dimensions and confirming safe and comfortable usage.

Package Contents:

  • Outer tent (fly) - 1 pc.
  • Inner tent - 1 pc.
  • Folding aluminum poles - 2 pcs.
  • Aluminum stakes - 14 pcs.
  • Guy lines with signal packing flags - 6 pcs.
  • Repair kit (for poles and tent) - 1 pc.
  • Polyester 68D Ripstop PU DWR stuff sack with handle - 1 pc.
  • Assembly instructions (sewn into the stuff sack)

Operation and Maintenance Guidelines for Longevity:

  • It is advised not to pack the tent away wet. If complete drying is not possible, it must be done at the first available opportunity.
  • Do not use chemical solvents or aggressive stain removers to clean the tent. Use laundry soap, water, and a soft sponge.
  • After use, clean dirt off poles and stakes with a damp sponge, wipe dry, and pack into their respective storage sacks.
  • Store the tent in a well-ventilated, dry room, ideally out of its stuff sack if possible.
  • Washing and deep cleaning are permitted only in accordance with the care instructions on the tent tag.

Manufacturer: Wechsel (Germany)

Warranty: 2 years

Specifications

Technical Specifications

Warranty
24 mo.
Color
Light brown
Country of origin
China
Brand registration country
Germany
Kit contents
Outer tent|Inner tent|Frame|Carry bag|Repair kit|Pegs|Guy lines
Package weight, kg
2.30
Package dimensions
550x170x170 mm
Weight, kg
2.05
Dimensions
2350x1400x930 / 2350x900x930 mm
Water resistance, mm
7000
Features
Initial setup of the outer flysheet keeps the inner tent dry during setup in the rain;<br />
 Extended sleeping area;<br />
 Color-coded poles and side-release buckles;<br />
 4 large ventilation flaps;<br />
 Special guy line flags, which also serve for guy line packing;<br />
 NoSeeUm mosquito net on each tent door;<br />
 The entrance door can be used as an awning;
Packaging
Carry bag with handle
Floor
Polyester 75D 210T PU DWR, 7000 mm water column
Inner tent
Polyester Taffeta 70D 185T DWR
Outer tent
Polyester 68D Ripstop PU DWR, 5000 mm water column
Pole material
Aluminum
Season
3-season
Shape
Tunnel
Design
Double-layer
Capacity
Single
Application
Tourism|High-altitude mountaineering|Bikepacking|Trekking
Type
Tents
Warranty period, mo.
24

General Information

Model
Tent Wechsel Aurora 1 TL Laurel Oak (231065)
SKU
DAS800
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog