The name of the Wechsel Forum 4 2 tent comes from the fact that during the development of the unique design of this tent, a peculiar forum was held where the opinions and wishes of many experts and enthusiasts in the outdoor field were taken into account, and the numbers mean the number of entrances and the capacity of the tent, respectively. This is arguably the only two-person tent that features as many as 4 separate entrances.
Having repeatedly proven its functionality, reliability, and versatility, the Wechsel Forum 4 2 is now presented in the top-tier Unlimited Line of tents, featuring a hydrostatic head of 10,000 mm, the lightest and most reliable DAC Featherlite NSL Green aluminum frame, the most durable tent and floor materials, and a hermetic compression sack. This model is unrivaled in both construction and functionality, remaining the most stable two-person semi-geodesic tent. At the same time, the enlarged sleeping area and spacious vestibules make this model a fully-fledged tent in terms of capacity.
The use of a self-supporting construction provides a huge advantage in the speed and convenience of pitching the tent, whether on rocky ground, snow, or sand. Attaching the outer tent to the frame saves time during pitching and keeps the inner tent dry during rain. This is undoubtedly one of the best tents for those embarking on paired expeditions, undertaking long and difficult traverses and ascents in unpredictable weather conditions ranging from hot deserts to humid alpine climates.

Not limiting movement and route selection to the goal, not restricting freedom of choice — this is the main task that the Wechsel Unlimited Line tent series is designed to handle. These tents are durable, functional, and transportable enough for long expeditions on snow and glaciers and for crossing vast expanses of desert terrain. All tents in the Unlimited Line are moderately lightweight without compromising reliability and capacity, as confidence in your gear is the key to success on any expedition. The most stable designs and only the most reliable and wear-resistant materials are used here. The tent must meet the conditions of use in any terrain and in any weather conditions. And there can be no compromises here. The aluminum frame is made of lightweight and simultaneously reliable Korean DAC Featherlite NSL Green poles. The flysheet has a silicone coating, increased tear resistance (5 times higher than the Travel Line series), and UV resistance. The actual hydrostatic head of the floor is 10,000 mm. The Wechsel Unlimited Line pushes the boundaries of presence.
Technical Specifications:
- Type: Tent
- Shape: Dome (semi-geodesic)
- Capacity: 2 persons
- Total number of entrances / rooms: 4 / 1
- Construction: Double-layer
- Vestibule presence / quantity: Yes / 2
- Frame: "DAC Featherlite NSL Green", aluminum alloy Alu 7000 T8 (TH72M), ∅ 10.25 mm (2 poles - 12 sections, 1 pole - 11 sections)
- Outer flysheet material: Nylon 40D 240T Ripstop Double Siliconized DWR, 2000 mm hydrostatic head, Ripstop reinforcement structure, double-sided silicone coating, density - 53 g/m², tear strength - 11 kg.
- Inner tent material: Nylon 30D 280T Ripstop DWR, Ripstop reinforcement structure, water-repellent breathable fabric, density - 38 g/m²
- Floor material: Oxford Polyester 150D Ripstop PU DWR, 10,000 mm hydrostatic head, taped seams, water-repellent impregnation
- Mosquito net material: Nylon NoSeeUm 40D DWR
- Intended use: Trekking, expeditions, extreme tourism
- Color: Green
Dimensions and Weight:
- Inner tent (L x W x H): 220 x 125 x 112 cm
- Outer tent (L x W x H): 225 x 275 x 115 cm
- Packed size: 48 x 19 x 19 cm
- Tent weight (without stuff sack, repair kit, and pegs): 3.35 kg
- Tent weight (fully equipped): 3.65 kg
Design Features:
- The main advantages of a semi-geodesic dome tent lie in achieving an optimal balance of stability and weight. Just one additional pole in the package increases the number of pole intersection points from one to four and the number of full support points from four to six. Thus, the tent has increased resistance to snow and wind loads. Two poles form the space of the inner tent, and one cross pole forms two spacious vestibules and provides the necessary frame tension for rapid precipitation runoff. The tent frame allows it to be pitched even without fixing with pegs and guy lines, thus requiring less setup time and less installation space.
- The frame with the outer flysheet is pitched first, after which the inner tent is attached from the inside. This pitching scheme makes it possible to keep the inner tent dry when pitching in the rain, and also reduces setup/takedown time provided that the inner tent was fixed inside beforehand and will not be removed during disassembly. The outer flysheet is attached to the frame using sleeves and hooks.
- Four separate full-sized entrances make this tent completely unique and versatile, allowing you to set it up simultaneously however you need and however the terrain requires. Each user is guaranteed to have their own separate entrance. Summer ventilation of the tent is carried out according to your preference through the open entrances, allowing you to avoid drafts or, conversely, quickly ventilate the tent.
- Mosquito nets are located in the upper half of the inner tent door. The nets feature a zippered flap that closes the net when necessary to retain heat when using the tent in dry climates and at low temperatures.
- The tent vestibules do not sag under their own weight thanks to the support against the frame pole, which increases their internal space and improves moisture drainage from the flysheet.
- Increased length and width of the sleeping area exceeding the minimum allowable dimensions of accepted standards, ensuring sleeping comfort and more free space inside the tent.
- The frame poles feature color coding that matches the color coding of the tent sleeves; the side-release buckles also feature color coding, which helps to pitch the tent quickly and error-free in the field. The poles are so precisely fitted and tensioned that it creates the impression they assemble themselves after being taken out of the stuff sack.
- The tent features 4 APEX ventilation valves that can be opened and closed even from inside the tent. The valves are located in pairs in the middle and upper third of the tent, thereby ensuring proper ventilation of the inner and outer tents, preventing condensation formation, and regulating the internal temperature. The valves are secured with a rigid Velcro fastener and do not create unwanted noise even in gusty winds. Part of the inner tent is made of NoSeeUm mesh, which also improves ventilation. At the same time, the mesh features a zippered flap that closes the mesh when necessary to retain heat when using the tent in dry conditions and at low temperatures.
- Since the silicone coating has adhesive properties and does not allow seams to be taped, all seams of the flysheet and tent stuff sack are sewn using combined polyester-cotton threads that expand when exposed to moisture and additionally seal the seam, preventing moisture from penetrating inside. The repair kit includes a sealant for additional silicone treatment of the seams.
- Inside the tent, there are voluminous mesh pockets for placing necessary small items, as well as a shelf for a camping lantern or other important things.
- The guy line tension control system is implemented through the use of specially designed hardware. The guy line is securely fixed, and to change the tension force, there is no need to change the position of the pegs—it is enough to slide the adjuster on the guy line.
- The tent guy lines are made of ultra-strong Dyneema® material, which prevents guy line breakage even in strong gusty winds. A special red flag pocket is attached to the guy lines, which secures the folded tent guy lines in the transport position and acts as a signal flag for quick visual detection of the pitched tent's guy lines. Additionally, the guy lines have a woven-in reflective thread, thanks to which they remain clearly visible during daylight hours and at night in a flashlight beam.
- Side-release buckles connecting the inner tent and outer flysheet are oriented in such a way that flysheet tension control can be easily performed with one hand. The buckles of the flysheet peg loops are also adjustable.
- Double loops of the lower flysheet border provide the necessary fixing variability, which is extremely important for quality flysheet tension when pitching the tent on rocky ground, where pegs can only be fixed at certain points in the terrain where there are no rocks.
- Reinforced aluminum pegs have a wedge shape, making them more resistant to bending and better fixed in the ground. They have special slots for attaching guy lines. In addition, they are equipped with a loop made of Dyneema® material, making them easier to pull out of the ground.
- The tent compression sack can be used as a dry bag with a protection level of 10,000 mm hydrostatic head, as it has a hermetic neck that rolls up and is secured with a side-release buckle, and is made of the same material as the flysheet, making it very durable and reliably protecting contents from moisture and damage.
Materials:
- DAC Featherlite NSL Green Alu 7000 T8 TH72M. The Korean company DAC, whose poles are used in the construction of this tent, is the absolute world leader in the production of lightweight, durable, and eco-friendly poles and frames for tents. The pole material is a patented ultra-strong hardened alloy TH72M based on Alu 7000 group aluminum alloys (the alloy has the best strength-to-weight ratio, and products made from it operate in the elastic deformation zone almost to complete destruction—they bend but do not break). Also, DAC Featherlite NSL Green poles have a unique construction with variable tube wall thickness, pressed-in connectors, and reinforcing ring inserts. Thus, it was possible to combine the company's earlier developments, making the frame simultaneously lightweight and durable. During their production, the use of harmful chemicals is minimized.
- Nylon 40D 240T Ripstop Double Siliconized DWR, 3000 mm hydrostatic head - an ultra-lightweight, yet very dense and durable fabric with a thread thickness of 40D, density of 240T, weight of 53 g/m², and tear strength of 11 kg. High tear strength is due not only to the properties of the nylon itself, but also to the high fabric density, Ripstop weave structure, and double-sided silicone coating. The fabric's resistance to moisture penetration corresponds to a hydrostatic pressure index of 2000 mm. DWR impregnation has hydrophobic properties and prevents moisture accumulation and subsequent fabric wetting. The fabric has increased resistance to UV radiation.
- Nylon 30D 280T Ripstop DWR - an ultra-lightweight smooth breathable fabric with a thread thickness of 30D and density of 280T. The polyamide fibers of the fabric possess significant strength, additionally increased due to the Ripstop weave structure. DWR impregnation has hydrophobic properties and prevents moisture accumulation from condensation and subsequent fabric wetting.
- Oxford Polyester 150D PU DWR, 10,000 mm hydrostatic head - a durable, wear-resistant fabric with a thread thickness of 150D and Oxford weave, most often used in expedition tents and tents with high requirements for floor strength. The large thread thickness and polyurethane coating of the fabric provide puncture resistance and high water resistance, corresponding to a hydrostatic pressure index of 10,000 mm, which is very important for the tent floor material. DWR impregnation has hydrophobic properties and prevents moisture accumulation and subsequent fabric wetting.
- Nylon NoSeeUm 40D DWR - the special weave of the NoSeeUm mesh creates 1054 holes per square inch, guaranteeing protection against any insects while avoiding a grid effect before the eyes when looking at the terrain from inside the tent. The durable mesh made of 20D polyamide threads has a water-repellent impregnation.
- YNS Hardware - plastic hardware from YNS is used in the Unlimited Line series tents. Having received 46 patents for innovative inventions, the company applies them in the production of high-quality hardware exclusively for outdoor products. The quality of this hardware is not inferior to samples from more famous American and Japanese brands.
- Dyneema®. Under this brand, ultra-high-molecular-weight polyethylene (UHMWPE) is produced. This material is 15 times stronger than steel, 40% stronger than Kevlar, while possessing extremely low weight (lighter than water), high wear resistance and resistance to aggressive environments, ultraviolet and gamma radiation, frost resistance, insensitivity to bending, and does not stretch under load. The material is widely used in the military industry, for the production of cables and ropes, and recently also for the production of camping equipment. The Dyneema® slogan says: "It doesn't matter until it really matters. There are no compromises in strength. Dyneema® is with you when it counts." That is why the guy lines of Wechsel Unlimited Line series tents are made of Dyneema®.
Compliance with Standards:
- ISO 811-1981 - an international standard confirming the declared level of water resistance of the tent material. Hydrostatic pressure material tests are conducted to determine resistance to water penetration. A tent water resistance of 2000 mm when the tent is properly pitched is reasonably considered sufficient and exceeds the regulatory requirements for waterproof tent flysheets by more than 1.5 times.
- ISO 13937-4 - a standard that determines the fabric's resistance to double tear. A fabric strength level of 11 kg means that a force of 11 kg directed in opposite directions must be applied to the site of an already formed fabric tear in order to enlarge the tear. A strength of 11 kg is an excellent indicator for ultra-thin silicone-coated tent fabrics.
- ISO 5912:2011 - an international standard defining the dimensions of tent sleeping areas and confirming their safe and comfortable use
Kit Contents:
- Outer flysheet - 1 pc.
- Inner tent - 1 pc.
- Folding aluminum poles - 3 pcs.
- Pegs (wedge-shaped aluminum) - 16 pcs.
- Guy lines (ultra-strong made of Dyneema® material) - 4 pcs.
- Suspended textile shelf - 1 pc.
- Repair kit (for poles and tent) - 1 pc.
- Silicone seam sealant - 1 pc.
- Hermetic compression sack made of Oxford Polyester 150D PU DWR fabric with a handle - 1 pc.
- Assembly instructions (sewn into the stuff sack)
Operation and Maintenance Features for Extending Service Life:
- Before using the tent for the first time in knowingly wet conditions, it is recommended to treat the outer flysheet seams once with the branded silicone sealant (supplied in the kit). The sealant is applied in a thin layer to a dry, clean seam surface, and after 12 hours the tent is ready for use.
- It is advisable not to pack the tent wet into its stuff sack. If it is not possible to dry the tent completely, this must be done at the first convenient opportunity.
- The use of any chemical solvents and aggressive stain removers for cleaning the tent is not allowed. It is recommended to use household soap, water, and a soft sponge.
- After using the tent, the frame and pegs should be cleaned of dirt with a damp sponge, wiped with a dry cloth, and packed into the supplied stuff sacks.
- The tent must be stored in a ventilated, dry room, if possible out of its stuff sack.
- Washing and deep cleaning of the product are allowed only in accordance with the recommendations indicated on the tent label.
Manufacturer: Wechsel (Germany)
Warranty Period: 2 years