DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Tent Wechsel Exogen 1 ZG Green (231048)1 / 10

Tent Wechsel Exogen 1 ZG Green (231048)

SKU DAS812

Description

Wechsel Exogen 1 is an unmatched ultralight tent designed primarily for solo extended trekking and technical ascents in unpredictable weather conditions, where low gear weight is just as critical as reliability. Lightweight backpacking enthusiasts will reasonably point out that there are even lighter tent models. However, how many of these ultra-light models feature a full double-wall construction, a frame with six ground-support points, a proper sleeping area and ample interior space, a spacious vestibule where you can comfortably prepare meals on a gas stove without fear of damaging the tent, and a 5,000 mm hydrostatic head water resistance?

Hub-pole frames with 4 ground-support points are used by many manufacturers as an alternative to classic dome designs. However, Wechsel engineers evolved and improved this design by extending the central pole, resulting in 6 ground-support points. Thanks to this solution, the tent gains exceptional stability against wind and snow loads, improved moisture resistance, and increased vestibule volume. This design allows the tent to stand freely and requires minimal pitching space since pegging out is not strictly mandatory. The tent's functionality can be expanded by purchasing an optional footprint (not included), which protects the tent's main floor from damage, creates a vestibule floor, and together with the outer flysheet and frame allows the tent to be used as a fast summer shelter. The double-sided silicone coating of the flysheet increases the material's tear strength, while the polyurethane floor coating provides puncture resistance—crucial for the floor when used in both forested and rocky terrain.

Zero-G Line

Zero-G Line - a lineup of weightless tents (Zero Gravitation). If you are looking for a tent for long mountain treks and journeys through wind, rain, and snow, if you need to account for every single gram because you are alone with nature and carrying all your gear on your back, if you appreciate superb quality, the functionality of every detail, and high standards of comfort, then the Wechsel Zero-G Line gear series will undoubtedly catch your eye. When developing the Zero-G Line series, the primary focus was on reducing gear weight. However, weight reduction is not achieved at the expense of tent reliability, but rather through the use of the most advanced technological materials and designs. The aluminum frame is crafted from lightweight yet reliable Korean Yunan poles. The flysheet features a silicone coating, increased tear strength (3 times higher than the Travel Line series), and resistance to UV radiation. At the same time, all Wechsel Zero-G Line models feature practical entrances and sufficient space for resting and gear. This tent line will captivate bikepackers, mountaineers, and lightweight backpacking enthusiasts.

Outdoor Award The Wechsel Exogen 1 ZG Green tent was tested by experts from the most authoritative German recreation and outdoor equipment publication, Outdoor, and recommended as a lightweight yet spacious and comfortable tent for solo trekking that lives up to its claimed specifications. Outdoor magazine experts monthly select and test products across various categories, recommending the best examples to their readers.

Specifications:

  • Type: Tent
  • Shape: Dome (hemisphere) with hub-pole connection
  • Capacity: 1 person
  • Total number of exits / rooms: 1 / 1
  • Construction: Double-wall
  • Vestibule presence / quantity: Yes / 1
  • Frame: "Yunan", aluminum alloy Alu 7001 T6 EF, ∅ 9.5 mm, end tips «Shok Tip» ∅ 8.6 mm made of Acetal® material (1 pole - 17 pre-bent sections with hub connectors, 1 pole - 9 pre-bent sections)
  • Outer flysheet material: Nylon 20D 240T Ripstop Double Siliconized DWR, 3000 mm hydrostatic head, Ripstop reinforcement structure, double-sided silicone coating, density - 48 g/m², tear strength - 7 kg.
  • Inner tent material: Nylon 20D 280T Ripstop DWR, Ripstop reinforcement structure, water-repellent breathable fabric, density - 38 g/m²
  • Floor material: Nylon 30D 240T Ripstop PU DWR, 5000 mm hydrostatic head, taped seams, water-repellent impregnation, density - 80 g/m²
  • Mosquito net material: Nylon NoSeeUm 20D DWR
  • Intended use: Lightweight backpacking, bikepacking, mountaineering
  • Color: Green (dark green)

Dimensions and Weight:

  • Inner tent (L x W x H): 215 x 70 x 95 cm
  • Outer tent (L x W x H): 220 x 160 x 95 cm
  • Packed dimensions: 42 x 15 x 15 cm
  • Tent weight (without stuff sack, repair kit, and pegs): 1.30 kg
  • Tent weight (fully equipped): 1.48 kg

Design Features:

  • The main advantages of a dome tent with a five-pole hub connection and one cross pole, compared to a classic dome scheme, lie in achieving significantly higher stability and greater interior volume without increasing self-weight. The frame has 6 ground-support points, which ensures high stability and load resistance. The cross pole without hub connectors increases vestibule volume and provides the necessary frame tension for rapid precipitation runoff. The tent frame allows pitching even without securing pegs and guy lines, thus requiring less setup time and pitching space.
  • Initially, the inner tent is attached to the frame, after which it is covered by the outer flysheet. This setup scheme makes it possible to place the frame with the inner tent in the most convenient and flat spot before securing the outer flysheet and guy lines. Furthermore, the frame with the inner tent can be used independently of the outer flysheet on hot summer nights. The inner tent attaches to the poles using hooks.
  • A mosquito net is located in the upper half of the inner tent door.
  • The tent vestibule does not sag under its own weight thanks to the support against the frame pole, which increases its interior space and improves moisture runoff from the flysheet.
  • Increased sleeping area length and width, exceeding the minimum allowable standards. The sleeping area has a strictly rectangular shape and does not taper at either the head or foot end, ensuring comfortable sleep and more free space inside the tent.
  • Frame poles feature color coding that matches the color coding of the side-release buckles, helping to pitch the tent quickly and flawlessly on site. The poles are fitted and tensioned so well that it feels as though they assemble themselves once taken out of the stuff sack.
  • The tent features 2 large APEX ventilation valves located on the sides of the tent at the foot and head areas. Positioned in the upper third of the walls, these valves ensure proper ventilation of both the inner tent and outer flysheet, prevent condensation buildup, and regulate interior temperature. The valves are secured with a rigid Velcro fastener and do not create unwanted noise even in gusty winds. Part of the inner tent is made of NoSeeUm mesh, which also enhances ventilation.
  • One half of the entrance door features specialized hardware allowing it to be used as a sun or rain awning by using trekking poles as supports and securing them with guy lines.
  • Since silicone coating has adhesive properties and prevents seam sealing via tape, all seams of the flysheet and tent stuff sack are stitched using combined polyester-cotton threads that expand when exposed to moisture, additionally sealing the seam and preventing moisture penetration.
  • Spacious mesh pockets are provided inside the tent for organizing essential small items.
  • The guy line tension control system is implemented through specially designed hardware. The guy line is securely fixed, and adjusting tension requires no change in peg positioning—simply sliding the tensioner on the guy line is sufficient.
  • Guy lines are made of ultra-strong Dyneema® material, preventing guy line rupture even in strong gusty winds. The guy lines are yellow and feature an interwoven reflective thread, ensuring high visibility during daylight and at night under flashlight illumination.
  • Fasteners connecting the inner tent and outer flysheet are oriented so that flysheet tension adjustment can be easily performed with one hand. Buckles on the flysheet anchoring loops are also adjustable.
  • Double loops on the lower hem of the flysheet provide necessary fixation variance, which is critical for proper flysheet tensioning when pitching the tent on rocky ground where pegs can only be fixed at specific spots clear of rocks.
  • Ultralight aluminum pegs (weighing only 10 grams each) have a wedge shape, making them more bending-resistant and better anchored in the soil. They feature special slots for attaching guy lines. Additionally, they are equipped with a yellow Dyneema® loop for enhanced visibility (making them harder to lose) and easier removal from the ground.
  • The tent stuff sack is made from the same material as the flysheet, making it lightweight, durable, and reliable in protecting the contents.

Materials:

  • Yunan Alu 7001 T6 Eco Friendly. The Korean company Yunan, whose poles are used in this tent's construction, is one of two global leaders in producing lightweight, durable, and eco-friendly tent poles. The pole material is high-strength tempered aluminum-based alloy. Its Al-Zn-Mg-Cu composition base and thermal tempering determine higher strength, a higher modulus of elasticity, and the lowest residual deformation coefficient compared to other popular aluminum alloys. In terms of strength-to-weight ratio, Alu 7001 T6 outperforms steel and titanium alloys. Today, this aluminum alloy is the industry standard for producing the most reliable and lightweight tent frames.
  • Acetal® - a special polymer material combining properties such as low weight comparable to plastic, high hardness comparable to metals, wear resistance in dry and humid environments, elasticity, and impact resistance. Pole tips made from this material feature low weight and an almost unlimited service life.
  • Nylon 20D 240T Ripstop Double Siliconized DWR, 3000 mm hydrostatic head - an ultralight, yet very dense and durable fabric with a thread thickness of 20D, 240T density, 48 g/m² weight, and 7 kg tear strength. High tear strength is driven not only by the nylon's properties, but also by high fabric density, Ripstop weave structure, and double-sided silicone coating. Resistance to moisture penetration corresponds to a 3000 mm hydrostatic head pressure rating. DWR impregnation provides hydrophobic properties and prevents moisture accumulation and subsequent fabric soaking. The fabric has increased resistance to UV radiation.
  • Nylon 20D 280T Ripstop DWR - an ultralight, smooth, breathable fabric with 20D thread thickness and 280T density. Polyamide fibers possess significant strength, further enhanced by the Ripstop weave structure. DWR impregnation features hydrophobic properties and prevents condensation moisture accumulation and subsequent fabric soaking.
  • Nylon 30D 240T Ripstop PU DWR, 5000 mm hydrostatic head - a lightweight and durable fabric with 20D thread thickness, 240T density, and 80 g/m² weight. Polyamide fibers possess significant strength, further enhanced by the Ripstop weave structure. Thanks to the polyurethane coating, fabric resistance to moisture penetration corresponds to a 5000 mm hydrostatic head rating. This same polyurethane coating provides high puncture resistance, which is vital for the tent floor material. DWR impregnation features hydrophobic properties and prevents moisture accumulation and subsequent fabric soaking.
  • Nylon NoSeeUm 20D DWR - specialized NoSeeUm mesh weave creates 1054 openings per square inch, guaranteeing protection against any insects while avoiding visual mesh glare when observing scenery from inside the tent. The durable mesh made of 20D polyamide threads features water-repellent impregnation.
  • YNS Hardware - Zero-G Line tents utilize YNS plastic hardware. With 46 patents for innovative inventions, the company applies them in manufacturing high-quality hardware exclusively for outdoor products. The quality of this hardware rivals products from more renowned American and Japanese brands.
  • Dyneema®. This brand name designates ultra-high-molecular-weight polyethylene (HPPE). This material is 15 times stronger than steel, 40% stronger than Kevlar, yet possesses extremely low weight (lighter than water), high wear resistance, resistance to aggressive environments, ultraviolet and gamma radiation, cold resistance, insensitivity to bending, and does not stretch under load. The material is widely used in the military industry, for manufacturing cables and ropes, and recently for tourist gear production. The Dyneema® slogan states: "It doesn't matter until it really matters. There are no compromises in strength. Dyneema® is with you when it counts." This is exactly why the guy lines of Wechsel Zero-G Line tents are made of Dyneema®.

Standards Compliance:

  • ISO 811-1981 - an international standard confirming the stated water resistance level of the tent material. Hydrostatic pressure material tests are conducted to determine resistance to water penetration. A tent water resistance of 3000 mm hydrostatic head with correct pitching is reasonably considered sufficient and exceeds regulatory requirements for waterproof tent flysheets by more than 2 times.
  • ISO 13937-4 - a standard determining fabric tear resistance on a double tear. A 7 kg fabric strength level means that a 7 kg force directed in opposite directions must be applied to an already initiated tear to propagate it further. A 7-kg strength is an excellent indicator for ultrathin polyamide tent fabrics with a silicone coating.
  • ISO 5912:2011 - an international standard defining tent sleeping area dimensions and confirming their safe and comfortable use.

Kit Contents:

  • Outer flysheet - 1 pc.
  • Inner tent - 1 pc.
  • Folding aluminum poles - 6 pcs. (five of them connected by aluminum hub connectors into a single frame)
  • Pegs (wedge-shaped aluminum) - 12 pcs.
  • Guy lines (ultra-strong Dyneema®) - 4 pcs.
  • Repair kit (for poles and tent) - 1 pc.
  • Stuff sack made of Nylon 20D 240T Ripstop Silicon DWR fabric with a handle - 1 pc.
  • Assembly instructions (sewn into the stuff sack)

Operating and Maintenance Features for Extended Lifespan:

  • It is advised not to pack the tent wet into its stuff sack. If complete drying is not possible, it must be done at the first convenient opportunity.
  • Do not use any chemical solvents or aggressive stain removers for cleaning the tent. It is recommended to use household soap, water, and a soft sponge.
  • After use, the frame and pegs should be cleaned of dirt with a damp sponge, wiped with a dry cloth, and packed into their respective included sacks.
  • The tent must be stored in a ventilated, dry room, preferably without the stuff sack.
  • Washing and deep cleaning of the product are permitted only in accordance with the recommendations indicated on the tent label.

Manufacturer: Wechsel (Germany)

Warranty Period: 2 years

Specifications

Technical Specifications

Warranty
24 mo.
Color
Dark green
Country of origin
China
Brand registration country
Germany
Kit contents
Outer tent|Inner tent|Frame|Carry bag|Repair kit|Pegs|Guy lines
Package weight, kg
1.52
Package dimensions
450x150x150 mm
Weight, kg
1.34
Dimensions
2200x1600x950 / 2150x700x950 mm
Water resistance, mm
5000
Features
Increased stability due to modified dome construction; Expanded vestibule volume; Color-coded poles and side-release buckles; 2 large ventilation flaps; Heavy-duty Dyneema guy lines; NoSeeUm mosquito net; Separate pockets for small items inside the tent; Yunan poles; Increased sleeping area length and width;
Packaging
Carry bag with handle
Floor
Nylon 40D 240T Ripstop PU DWR, 5000 mm water column
Inner tent
Nylon 20D 280T Ripstop DWR,
Outer tent
Nylon 20D 240T Ripstop Silicon DWR, 3000 mm water column
Pole material
Aluminum
Season
3-season
Shape
Dome
Design
Double-layer
Capacity
Single
Application
Tourism|High-altitude mountaineering|Bikepacking|Trekking
Type
Tents
Warranty period, mo.
24

General Information

Model
Tent Wechsel Exogen 1 ZG Green (231048)
SKU
DAS812
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog