DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Solrua SCF-2.5A Pro Solar Collector1 / 2
9 272 ₴
In Stock
1

Solrua SCF-2.5A Pro Solar Collector

SKU Solrua SCF-2.5A Pro

Description

Description of the Solrua SCF-2.5A Pro collector

Solrua SCF-2.5A Pro Solar Collector is an alternative innovative system that provides heating and hot water supply in your house, cottage, or industrial premises. The system can operate both in summer and winter. The Solrua SCF-2.5A Pro solar collector can supply hot water to a summer pool and showers, is suitable for "underfloor heating" systems, and is used in greenhouses and orangeries. The Solrua SCF-2.5A Pro belongs to the type of pressurized flat solar thermal systems operating under pressures up to 15 bar. The Solrua SCF-2.5A Pro solar collector is an uncompromising solution in terms of design and parameters in the class of flat solar collectors. The absorber is entirely made of 0.4 mm thick aluminum sheet and coated with Tinox Energy coating, which reduces the mass of the collector. The connection of the copper pipeline to the absorber plate is performed using a modern ultrasonic welding method. The applied highest class U1 structural glazing for solar energy absorption affects the high optical efficiency of 80.2% confirmed by a test at the SPF Rapperswil Institute. Thermal insulation made of mineral wool increased to 40 mm in thickness with 30 mm casing wall insulation ensures low heat loss. The powder-coated casing provides an attractive design for the solar collector.

Design of the Solrua SCF-2.5A Pro collector

The Solrua SCF-2.5A Pro solar collector consists of a casing made of high-rigidity bent aluminum profile. The casing cover is made of 4 mm thick structural tempered glass, which provides a high solar energy absorption coefficient (95%, high U1 class). Located under the casing cover is the absorber (heat receiver), which is made of a 0.4 mm thick aluminum sheet with a high-selective TiNoX Energy coating produced on the basis of titanium and silicon oxides, with high selectivity characteristics (absorption 95%, 2 em) of 8 mm diameter tubes. The absorber, in turn, is soldered to the copper tube by an ultrasonic method. Such soldering ensures the most efficient metal contact, as a result of which heat transfer increases. In the lower part of the casing and on the sides, there is a layer of mineral thermal insulation 40 mm and 30 mm thick respectively. The operating principle of the collector consists of a continuous cycle of water circulating through the absorber, which, heated by solar heat, enters the tank. In the tank, the water mixes and gradually the water temperature in the tank increases. Water goes from the tank for domestic needs. The solar collector can provide 150-250 liters of hot water per day.

Installation of the Solrua SCF-2.5A Pro collector

Flat collectors are installed at an inclination to ensure their correct operation. For year-round operation, it is recommended to install them at an angle from 30⁰ to 90⁰. In case of installing the collector on a roof with a lower slope, adjustable holders are used. In addition, it is possible to install solar collectors on the facade of a building or on a flat roof. Universal structures from the same manufacturer are used for this.

The efficiency of solar collectors depends on the level of solar insolation, which varies across different regions. You can familiarize yourself with the insolation level by region, as well as the principles of calculating collector power from the insolation level, by following the link: Insolation Map of Ukraine

Advantages of Solrua SCF-2.5A Pro collectors

  • simple installation scheme;
  • aluminum absorber;
  • high durability;
  • high efficiency reaching 80%;
  • all-season application;
  • capable of heating water up to 90 degrees Celsius
  • weight.

Delivery set:

  • flat collector;
  • documentation.

Additionally for the solar collector you can purchase:

  • electronic controller;
  • circulation pump;
  • temperature sensor;
  • thermostat;
  • storage tank.

Purchase at Eko.House

1. Professional Consultation

Our qualified specialists will help you choose the optimal solution. Do not miss the opportunity to take advantage of advice that can save you time and money. Call us, we welcome all our current and future clients.

2. Found cheaper — we will give a discount

If you decide to buy a solar collector elsewhere, do not rush. Take advantage of the special offer "Find cheaper and get a discount". We will try to make a better offer than our competitors. The promotion applies to the entire range of products in our store and is permanently active.

3. Sale of Related Products

Our store sells the full range of products for installing solar collectors (controllers, heating elements, magnesium anodes, fill tanks, mountings).

4. Design and Installation across Ukraine

Design and installation of solar collectors with related systems is often a labor-intensive process with its own specifics. In addition to direct sales, our specialists and contracting organizations will help you build an efficient water supply solution across almost the entire territory of Ukraine. Contact us and we will take care of all the chores regarding delivery, installation, and warranty service. No overpayments.


The state will pay from 20 to 70% of the cost of the solar panel!

We cooperate with Oschadbank within the framework of the State Energy Saving Program. The state bank "Oschadbank" provides loans to individuals for the purchase of solar collectors. The program includes reimbursement of a certain amount of the loan, ranging from 20 to 70% of the loan principal.

The loan is issued for up to 36 months with an interest rate of 25% per annum. A personal contribution of the client is also required - 10% of the boiler price. The minimum loan amount is 1 thousand UAH, maximum is 30 thousand UAH.

We draw your attention to the fact that the solar collector falls under this program, giving you the opportunity to save a tangible amount of money on the purchase. You can clarify details with our specialists by phone or read the article.

It works! Our clients have repeatedly used this program.

Specifications

Technical Specifications

Collector Type
Flat plate

General Information

Model
Solrua SCF-2.5A Pro Solar Collector
SKU
Solrua SCF-2.5A Pro
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog