Flat collector solar water heating system with Alba 300 tank
ALTEK
75,900 ₴
1 / 2SKU Hewalex KS2100TАС
Hewalex KS2100TAC Solar Collector is an alternative innovative system that provides heating and hot water supply for your house, cottage, or industrial premises. The system can operate both in summer and winter. The Hewalex KS2100TAC solar collector can supply hot water to summer pools and showers, is suitable for underfloor heating systems, and is used in greenhouses and orangeries. The Hewalex KS2100TAC collector belongs to the type of pressurized flat solar heating systems. The Hewalex KS2100TAC solar collector is an uncompromising solution in terms of design and parameters in the class of flat solar collectors. The absorber is completely made of 0.41 mm thick sheet aluminum and coated with Eta Plus coating from Blue Tec, which reduces the mass of the collector. The connection of the copper pipeline to the absorber plate is carried out using a modern ultrasonic welding method. The applied highest-class U1 structural glazing for solar energy absorption contributes to a high optical efficiency of 80.2%, confirmed by a test at the SPF Rapperswil Institute. Mineral wool thermal insulation increased to 45 mm in thickness with 20 mm casing wall insulation ensures low heat losses. The powder-coated casing provides an attractive design for the solar collector.

The Hewalex KS2100TAC solar collector consists of a casing made of high-rigidity bent aluminum profile. The casing cover is made of 3.2 mm thick structural tempered glass, which provides a high solar energy absorption coefficient (95%, high U1 class). Located under the casing cover is the absorber (heat receiver), which is made of an aluminum sheet with a highly selective TiNoX coating produced on the basis of titanium and silicon oxides, with high selectivity characteristics (95% absorption, 5% emission coefficient). The absorber, in turn, is soldered to the copper tube by an ultrasonic method. Such soldering ensures the most efficient metal contact, thereby increasing heat transfer. Located in the lower part of the casing and on the sides is a layer of polyurethane foam thermal insulation 45 mm and 20 mm thick, respectively. The operating principle of the collector consists of a continuous cycle of water circulating through the absorber, which, heated by solar heat, enters the tank. In the tank, the water mixes and the water temperature in the tank gradually increases. Water goes from the tank for domestic needs. The solar collector can provide 200 liters of hot water per day.
T - Eta Plus absorber coating from Blue Tec.
AC - aluminum absorber with copper tube.
Flat collectors are installed at an incline to ensure their correct operation. For year-round operation, it is recommended to install them at an angle of 30⁰ to 60⁰. In case of installing the collector on a roof with a smaller slope, adjustment brackets are used. In addition, solar collectors can be installed on the building facade or on a flat roof. Universal structures from the same manufacturer are used for this.
The efficiency of solar collectors depends on the level of solar insolation, which varies across different regions. You can familiarize yourself with the insolation levels by region, as well as the principles of calculating collector capacity based on the insolation level, by following the link: Insolation Map

Our qualified specialists will help you choose the optimal solution. Do not miss the opportunity to use advice that can save you time and money. Call us, we welcome all our current and future clients.
If you decide to buy a solar collector elsewhere, do not rush. Take advantage of the special offer "Find Cheaper and Get a Discount". We will try to make a better offer than our competitors. The promotion applies to the entire range of goods in our store and is permanently active.
Our store sells the full range of products for the installation of solar collectors (controllers, heating elements, magnesium anodes, filling tanks, mounts).
Design and installation of solar collectors with related systems is often a labor-intensive process with its own specifics. In addition to direct sales, our specialists and contractors will help you build an efficient water supply solution. Contact us and we will take care of all the hassles regarding delivery, installation, and warranty service without overpayments.
We cooperate within the framework of the State Energy Saving Program. The state bank provides loans to individuals for the purchase of solar collectors. The program includes reimbursement of a certain loan amount, ranging from 20 to 70% of the loan principal.
Loans are issued for up to 36 months with an annual interest rate of 18%. A personal client contribution of 10% of the boiler price is also required. The minimum loan amount is 1k UAH, maximum is 30k UAH.
Please note that the solar collector falls under this program, giving you the opportunity to save a significant portion of money on the purchase. You can clarify details with our specialists by phone or read the article.
It works! Our clients have repeatedly used this program.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.