DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Flight Stack VYRIY F405 V2 BMI270 50A_BLS 3-6s (controller and regulator for quadcopter) - wholesale kit 50pcs1 / 9
142 000 ₴
Out of stock

Flight Stack VYRIY F405 V2 BMI270 50A_BLS 3-6s (controller and regulator for quadcopter) - wholesale kit 50pcs

SKU VYR-0002

Description

The VYRIY F405 V2 50A_BLS flight stack can, with a few caveats, be considered a localized version of the well-known and widely used SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack. This stack is manufactured by Vyriy.Drone, a Ukrainian military-tech company specializing in the development of technological solutions for the needs of the Armed Forces of Ukraine, as well as the production of FPV drones, repeaters, and their components. First and foremost, this means that a significant number of drones for the Ukrainian military have already been assembled using this stack.
The VYRIY F405 V2 controller has everything on board required to control the flight of a multicopter (up to 8 motors) sized approximately from 4 inches upwards, for both manual flight and autonomous modes.
As mentioned above, this is essentially a modified 3rd-generation SpeedyBee, which naturally implies flashing the Vyriy controller with the same target — SPBE/SPEEDYBEEF405V3. This fact has an undeniable advantage: the availability of a vast amount of information regarding configuration and troubleshooting for the SpeedyBee controller, which is, of course, also applicable to this stack.
As for the differences compared to the prototype, features less relevant to our current realities were primarily removed from the flight controller board:
* Battery charge indicator LED,
* Bluetooth module for configuring the controller from a smartphone,
* Additional solder pads in the corners for connecting arm LEDs.
The board architecture itself has been selectively modified on both sides; a PinIO interface and connection pads for the freed-up UART4 have been added to the board. All these improvements primarily affect the final price of this stack while allowing it to serve as a base for assembling drones with currently required capabilities—GPS flight, control of additional logic/power devices on board, servo control, and connection of external targeting systems.
As for the Electronic Speed Controller (ESC), it underwent significantly fewer modifications and differs from its Chinese prototype only by minor design changes, the most important of which did not go beyond calibrating and repositioning SMD components on the board.
Overall, considering the full traditional feature set on board, this stack is a solid mid-range candidate for both hobbyist and non-hobbyist applications.

Features:
  • Worthy substitute for the well-known SpeedyBee F405 V3 BLS 50A Stack
  • Flashable with the official SPEEDYBEEF405V3 firmware
  • Dedicated BEC for the video channel
  • Support for up to 8 motors
  • Support for up to 3 servos
  • PinIO interface
  • LED interface
  • Made in Ukraine
Specifications:
  • Main Controller: STM32F405
  • Application: Multicopters
  • Firmware: Betaflight (SPBE/SPEEDYBEEF405V3)
  • Stabilization: BMI270 (6DOF 8KHz)
  • Motor Outputs: 8
  • Servo Outputs: 3
  • UART Ports (Total): 5
  • PinIO Ports: 1
  • I2C Ports: 1
  • Sbus Inverter: Yes (R2)
  • Peripheral Interfaces: UART; I2C; PWM; PINIO;
  • Receiver Interfaces: PPM; DSM2; DSMX; SBUS; SUMD; SUMH; XBUS; IBUS; JETIEXBUS; CRSF; SRXL; ELRS
  • Protocols: PWM; Oneshot125; Oneshot42; Multishot; Dshot150; Dshot300; Dshot600; DShot1200; Proshot1000;
  • 4-in-1 ESC Output: Present
  • OSD: Integrated AT7456
  • Onboard BEC: 5V/3A
  • VTX BEC: 12V/3A
  • RSSI Input: Yes
  • Satellite Power: 3.3V/500mA
  • USB Port: USB-C
  • Input Voltage: 11.1–22.2 V
  • Mounting Pattern: 30.5x30.5 mm
  • Mounting Hole Size: 3 mm
  • Dimensions: 37x40x9.5 mm
  • Weight: 10.1 g
  • Type: Brushless ESC
  • Application: Multicopters
  • Power Supply: 11.1–25.2 V
  • Nominal Current: 50 A
  • Peak Current: 60 A
  • BEC Presence: None
  • Waterproofing: None
  • Sensored: None
  • Motor Control Type: PWM
  • Control Protocols: DSHOT1200; DSHOT300; DSHOT600;
  • Cooling: Passive, air
  • PWM Frequency: 24 kHz
  • Firmware: BlueJay 8bit
  • ESC Assembly Type: 4-in-1 independent
  • Mounting Pattern: 30.5x30.5 mm
  • Mounting Hole Size: 3 mm
  • Dimensions: 44.2x45.2x6.5 mm
  • Weight: 33.7 g
  • Total Weight: 43.8 g
  • Model Year: 2024
Package Contents:
  • Flight Controller - 50 pcs
  • Electronic Speed Controller - 50 pcs
  • 30mm Connection Harness - 50 pcs
  • Damping Grommets - 400 pcs
  • M3x25mm Mounting Bolts - 200 pcs
  • M3 Nylon Nuts - 200 pcs
  • 12AWG 100mm Power Wires - 100 pcs
  • XT60H-M Power Connector - 50 pcs
  • 1000uF 35V Capacitor - 50 pcs

Specifications

Technical Specifications

Age
Not for children
Material
non-toxic plastic, metal, rubber
Country of Origin
Ukraine
Warranty
1 month. Keep the label.
EAN
2722844763610

General Information

Model
Flight Stack VYRIY F405 V2 BMI270 50A_BLS 3-6s (controller and regulator for quadcopter) - wholesale kit 50pcs
SKU
VYR-0002
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog