Combo stack Diatone F405MK2 V2 MPU6000 F55_BLS 55A 3-6S
Diatone
4,550 ₴
1 / 10SKU ARMADA-H743-WING-V1
Flight controller for fixed-wing UAVs – ARMADA H743 WING V1 based on the ICM42688Px2 gyroscope and F7 processor. A localized and improved version of the well-known F7 series (STM32H743VIH6 processor) flight controllers for Fixed Wing UAV types.
During the product specifications development, all requirements set by UAV manufacturers for this type of controller were taken into account as much as possible:• On board, there are three power regulators:
--- 5V - 3A – for powering onboard systems. There is also the possibility of powering the receiver and peripherals when connected via USB only
--- 5.1V / 6V / 7.2V - 5A – for powering control surfaces (servos)
There is power line duplication via positive and negative contacts on the PDB to provide power redundancy for servos or a separate servo power board.
--- 9V / 12V / 17V - 3A – for powering the video channel
It is worth clarifying in more detail that, firstly, this solution allows using high-power transmitters (requiring an input voltage greater than 12V) through a voltage regulator rather than directly from motor power, thereby improving image quality.
Secondly, the controller implements video channel power management via the user2 mode (PinIO, an optional jumper is soldered), which allows turning off the video channel power from the control station when necessary.
• If video channel power management is not required, the jumper is not soldered.
• There is support for two cameras with switching via user1 mode (PinIO, always active), which allows separating the FPV and reconnaissance cameras and using a single video channel for them, etc., which collectively allows flexibly implementing any task
FAQ:
• On the earliest versions of the flight controllers, there is an error in the marking of the AirS contact (angled pin, above the positive battery contact) - it is actually a PinIO output. This will be corrected in future batches
• If you experience issues with peripherals connected via the I2C or CAN bus, check the logic HIGH voltage level on the bus contacts. The thing is that open-drain buses typically require pull-ups to the power line to correct the voltage level of that same logic HIGH. In certain cases, reverse pull-down to ground is required.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.