DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Flight controller for ARMADA F405 WING V1 aircraft1 / 9

Flight controller for ARMADA F405 WING V1 aircraft

SKU ARMADA-F405-WING-V1

Description

ARMADA F405 WING V1 – flight controller for fixed-wing UAVs.
To be precise, it can be called a localized and improved version of the well-known F4 series (STM32F405RGT6 processor) flight controllers for Fixed Wing UAVs, taking into account all the requirements set by UAV manufacturers for this type of controller:
• Input supply voltage from 3s to 8s (8V – 36V), which covers a fairly large range of UAV sizes and, specifically, power system solutions.
• To expand mounting options, power contacts for batteries. There are three power voltage regulators on board: --- 5V - 3A – for powering onboard systems. There is also the option to power the receiver and peripherals when connected via USB only --- 5.1V / 6V / 7.2V - 5A – for powering control actuators (servos) The power supply line between the PDB and the controller board is duplicated on the positive and negative wires to ensure reliability - 4V 17V - 3A – for powering the video channel. It is worth clarifying in detail that, firstly, this solution allows the use of high-power transmitters (which require an input voltage greater than 12V) through a voltage regulator rather than directly from the battery, which significantly affects power quality and reduces operational noise; secondly, the controller implements video channel power management via the user2 mode (PinIO, an optional jumper is soldered), allowing the video channel power to be turned off from the control radio when necessary.
• If video channel power management is not needed, the jumper is not soldered. The PinIO contact for user2 mode is broken out separately on the board.
• Support for dual cameras with switching via user1 mode (PinIO, always active) is also implemented, allowing the FPV and reconnaissance cameras to be separated while using a single video channel.
• All 6 UARTs are broken out to contact pads, allowing for flexible implementation.


Troubleshooting Tips (known user issues and solutions):

Basically, all issues are related to using the flight controller with ArduPilot + high-power domestically produced FHSS units. No critical issues have been reported with other firmwares yet.

• Possible erratic/unexplained firmware behavior when flashing the controller with peripherals connected via the STM32CubeProgrammer utility — from general SPI port errors like 0x4000 to various isolated cases | Resolved by standard re-flashing with peripherals completely disconnected.
• Most likely related to the previous point, periodic entry into BOOT mode upon firmware startup with a connected and active SBus input | Situational solution - bring up SBus with a delay after startup / More radical - standard re-flashing / Most radical (not 100% confirmed) - building a custom firmware with a fixed bootloader according to the provided targets.
• The MatekF4 flight controller target is also compatible with this board. Keep in mind that your 1-2W FHSS units are fully capable of introducing various interferences and distortions into surrounding module circuitry, so one good approach is to shield sensitive circuitry from transmitting antenna radiation. It is also worth taking into account existing feedback regarding operation with a well-known FHSS unit after updating its firmware (applies to 405 controllers in general, not just this specimen) — there is a suspicion that over time the 405 processor cannot cope with the increased data flow from the FHSS. If you have encountered a similar problem and, moreover, have a working solution, our team will be very grateful for feedback and a potential working recipe!

Features:
  • Dual camera support
  • Configurable BEC for video channel accounting for high-power VTX
  • VTX power cutoff via PinIO
  • Input voltage support up to 8s
  • 11 PWM outputs
  • LED support
  • [In Ukraine]
  • Warranty service in Ukraine
Specifications:
  • Main controller: STM32F405
  • Application: Fixed-wing UAV
  • Stabilization: ICM42688P (6DOF 8KHz)
  • Barometer: DPS368
  • Motor output count: 11
  • Total UART ports: 6
  • PinIO port count: 1
  • I2C port count: 1
  • Sbus inverter: Yes
  • Peripheral interface: UART; I2C; PWM; PINIO;
  • Receiver interface: PPM; DSM2; DSMX; SBUS; SUMD; SUMH; XBUS; IBUS; JETIEXBUS; CRSF; SRXL; ELRS
  • Protocols: PWM; Oneshot125; Oneshot42; Multishot; Dshot150; Dshot300; Dshot600; DShot1200; Proshot1000;
  • OSD: Built-in AT7456
  • Onboard BEC: 5V/3A
  • VTX BEC: 9-17V/3A
  • Servo BEC: 5-7.2V/5A
  • USB port: 3V
  • Mounting pattern: 30.5x30.5 mm
  • Mounting hole size: 3 mm
  • Dimensions: 54 x 36.5 x 16.5 mm
  • Weight: 20 g
  • Model: 20
    Package Contents:
    • Flight controller - 1 pc
    • Interface board - 1 pc
    • Interface board cable 200mm - 1 pc
    • PLS connectors 1x40 - 2 pcs
    • Board-to-board jumper wire 26AWG, 6

Specifications

Technical Specifications

Type
Flight controllers class="dlm-spec-name">Application
Country of manufacture
UkraineAge
Material
non-toxic plastic, metal, rubber
Warranty
12 months. Keep the sticker.
Length
52 mm
Width
35 mm
Height
15 mm

General Information

Model
Flight controller for ARMADA F405 WING V1 aircraft
SKU
ARMADA-F405-WING-V1
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog