RC All-Terrain Vehicle CX-100W
Voltronic
1,690 ₴
1 / 7SKU SM-1.0061
The Zohd Drift lightweight glider model will allow any pilot to take to the skies smoothly! Out of the box, the glider comes with almost everything needed to delight a beginner! The Drift is supplied in an FPV-Ready configuration—all that is required for takeoff is a radio control system and a flight battery, and later, when transitioning from visual flight to FPV (first-person view) flight, a headset, display, or goggles with a 5.8 GHz video receiver will be needed.
The glider features a compact, refined design with well-engineered connections for assembly at the airfield in a matter of minutes. An all-up weight of under 250 g and a relatively large wing area allow for comfortable flight even at fairly low speeds of 20-30 km/h, giving the pilot the necessary reaction time if an unexpected gust of wind catches it. The pusher propeller design, mounted above the tail boom, protects it from damage during landing, while the rigid directional rudder protects the pilot from the "fish tail" effect.
The glider is quite efficient in its class. If desired, instead of a LiPo battery, you can install a 2S or 3S 18650 Li-ion battery pack, which prioritizes capacity over discharge rate, allowing for much longer flight times.
The aircraft's electronics deserve special mention. Included with the glider is a full-featured ZOHD koPilot Lite flight controller, which combines extensive functionality with ultra-simple setup. All the pilot needs to do is adjust three potentiometers with a watchmaker's screwdriver: two set the stabilization level, and the third sets the return-to-home radius. Unlike other entry-level aircraft flight controllers, this one is already equipped with a GPS receiver, and if necessary, the glider will automatically turn around and fly back to the launch site.
Not least in importance is the all-in-one ZOHD VC400 FPV video system with a cloverleaf antenna—putting on an FPV headset or goggles lets you fully experience soaring through the sky. This module has it all right out of the box! A fairly powerful 400 mW transmitter provides enough range under good radio conditions to fly a couple of kilometers without any video interference. The 600TVL NTSC camera transmits a smooth and clear image, literally "placing" the pilot on board the glider. The camera also features a built-in OSD system that displays the pilot's callsign (so you don't confuse yourself with a neighbor), video transmission frequency (to share your aerial view), set broadcast power, and battery voltage (so you know when it's time to return). To make the module work, simply connect it to the glider's onboard power grid and configure the camera using the onboard button.
Initial assembly of the glider out of the box takes only about 20 minutes, and no soldering is required! Install the receiver in the lower compartment; both standard PWM receivers and S.BUS serial bus receivers are compatible (the latter are preferred due to their small size and weight, not to mention requiring only three wires to operate). In the upper rear compartment, connect and mount the flight controller, then plug in the receiver and servos. Place the camera and battery in the front compartment and connect the camera. Insert the tail boom and hook up the elevator pushrod to the servo arm. Insert the wing spars and slide the wings onto them. Insert the wing-securing screw. Install the appropriate propeller for your battery. Plug in the battery and put on the hatch cover. That's it—a quick check, transmitter configuration, and welcome to the skies!
You can now buy the Zohd Drift radio-controlled FPV glider in Ukraine with official warranty.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.