Motion Sensor (100W, 220V)
Voltronic
231 ₴
1 / 2SKU FireProtect 2 RB
Detection accuracy through steam, dust, and time
FireProtect 2 is a next-generation device for instant fire detection. The unique smoke chamber requires no regular cleaning, the dual-spectrum optical sensor distinguishes smoke from steam, the thermistor quickly responds to burning synthetic materials, and intelligent software algorithms minimize false alarms. All of this complies with modern fire safety standards. Thanks to thoughtful industrial design, mounting hardware, and in-app configuration, installation is quick and effortless.
Operating Principle
Smoke Detection
FireProtect 2 detects smoke without triggering on water steam, utilizing a bi-spectral optical sensor with blue and infrared LEDs. The LEDs emit light at different wavelengths, allowing the sensor to determine volatile particle size and respond exclusively to smoke.
The sensor smoke chamber is sealed against dust, dirt, and insects. Even if dust settles in the smoke channel, it does not impede or degrade detection. The optical layout is engineered so non-volatile particles or insects cannot cross both light beams simultaneously to cause false alarms.
Rapid Heat Detection
Two integrated thermistors handle temperature response. The thermistors are located externally on the housing for rapid threat detection.
If ambient room temperature exceeds 64°C or rises at a rate of 10°C per minute or faster, the detector registers a heat alarm. The thermal alarm triggers even in the absence of smoke.
Interconnected Fire Alarms
The detector supports interconnected fire alarms. This feature activates the built-in sirens across all Ajax fire detectors in the system when at least one triggers. In an emergency, this alerts maximum personnel across the facility.
FireProtect 2 detectors feature an optimized interconnected alarm algorithm that activates sirens across all interconnected units within 20 seconds. This feature functions when detectors operate with a central hub.
Standalone Operation
FireProtect 2 detectors can be deployed autonomously without an Ajax hub. In standalone mode, the unit signals alarms via its built-in siren and LED indication, but does not send push notifications to user smartphones, Ajax Translator, or PRO Desktop.
Manual and Automated Self-Testing
FireProtect 2 runs regular automated battery and sensor health diagnostics. If a fault is detected, the hub instantly notifies users and monitoring stations, while the detector activates corresponding visual/acoustic notifications via internal siren and LEDs. Sensor states can be checked at any time via the Ajax app.
The detector supports manual testing mode activated by pressing the front panel. The front cover features a mechanical button designed to be actuated by hand or a pole handle. The test triggers the onboard siren and sensor self-diagnostics, allowing field engineers to verify functionality and demonstrate acoustic/optical signaling patterns to clients.
Jeweller Wireless Communication Technology
Jeweller is a proprietary two-way radio protocol providing fast, secure communication between the hub and connected devices. The protocol provides a wireless communication range of up to 1700 meters in open terrain, accommodating large-scale facilities.
Jeweller handles event and alarm transmissions. The radio protocol also guarantees coordinated interconnected fire alarms within 20 seconds across systems with any quantity of FireProtect 2 devices. Real-time diagnostic states remain visible via the Ajax app.
Fast Mounting and Commissioning
Installing FireProtect 2 requires no housing disassembly. Pre-installed replaceable or non-replaceable batteries are included, and the SmartBracket mounting plate unlocks tool-free. SmartBracket features 90° rotational freedom, allowing installers to align the detector after mounting.
Pairing with the Ajax ecosystem takes less than a minute: open the Ajax app, scan the QR code, and assign the device to a designated room and security group.
Manufacturer
Ajax
Brand
Ajax
Detector type
Wireless
Detector category
Combined multi-sensor detector
Model
FireProtect 2 RB (Heat/Smoke)
FACP connection type
Wireless
Wireless communication range
1700 m
Detectable gases
None
Compatibility
Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub Hybrid (2G), Hub Hybrid (4G), ReX, ReX 2
Communication
Jeweller communication technology
Proprietary wireless protocol for transmission of alarms and events.
Features:
- Two-way communication.
- Device spoofing prevention.
- Block encryption with dynamic key.
- Instant event delivery.
- Remote configuration via Ajax app.
Radio frequency bands
868.0 – 868.6 MHz
Maximum Effective Radiated Power (ERP)
Up to 20 mW
Automatic power regulation for reduced power consumption and radio interference.
Radio signal modulation
GFSK
Radio link range
Up to 1700 m
Between detector and hub (or range extender) in line of sight.
Radio transmission encryption
All transmitted and stored data protected by block cipher with rolling key.
Frequency hopping
Prevents radio interference and jamming.
Sensing elements
Smoke sensor, Temperature sensor
Smoke detection
Sensing element
Dual-spectrum optical sensor
Identifies smoke by airborne particle size.
False alarm immunity
Immune to water vapor.
Patented smoke chamber
Protects smoke optical assembly against dust, dirt, and insect ingress.
Hazardous temperature detection
Sensing element
In accordance with Class A1 heat detector requirements
Meets EN 54-5 and BS 5446-2 standards.
Static temperature threshold alarm
At temperatures exceeding 64°C
Rate-of-rise heat alarm
When temperature increases by more than 10°C in 1 minute (or faster)
Anti-tamper protection
Tamper switch
Alerts on attempts to detach the detector from the surface or remove it from the mounting panel.
Spoofing protection
Device authentication
Communication loss detection
Within 15 minutes
Loss of communication detection interval depends on polling settings and unacknowledged packet count (configured in Jeweller / Jeweller/Fibra settings). Fixed polling interval: 300 seconds.
Additional features
Built-in siren
Acoustic output: 85 dB at 3 meters
Audible alarm signaling. Remains active until the initiating event clears or alarm is silenced by user.
Interconnected fire alarms
All networked fire detectors activate built-in sirens as soon as a single unit registers an alarm. Synchronized alarm propagation triggers within one hub-detector polling period, not exceeding 20 seconds.
LED indication
Green - power status
LED indicator pulses every 56 seconds. Compliant with EN 50291.
Yellow - fault warning
LED illuminates upon hardware or operational faults (e.g., low battery, fouled smoke chamber, or end of service life).
Red - fire alarm
LED flashes upon active fire alarm condition.
Front panel test button
In standby mode, initiates optical chamber diagnostic test. During alarm or trouble conditions, mutes siren.
Operating temperature range
0 °C to +50 °C
Operating humidity
Up to 80% non-condensing
Protection class
IP20
Power supply
2 x CR123A
Dimensions
123.7 × 123.7 × 44.7 mm
Weight
TBC g
Color
White
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.