DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Wireless Smoke and Heat Detector FireProtect 2 RB (Heat/Smoke) black
2 899 ₴
In Stock
1

Wireless Smoke and Heat Detector FireProtect 2 RB (Heat/Smoke) black

SKU FireProtect 2 RB (30294)

Description

Detection accuracy through steam, dust, and time

FireProtect 2 is a next-generation device designed for instantaneous fire detection. Its unique smoke chamber requires no routine maintenance or cleaning, the dual-spectrum optical sensor distinguishes smoke from steam, the thermistor reacts promptly to burning synthetic materials, and intelligent software algorithms reduce false alarms to a minimum. Fully compliant with modern fire safety standards. With its well-engineered design, straightforward mounting, and in-app setup, the detector installs quickly and seamlessly.

Operating Principle
Smoke Detection

FireProtect 2 detects smoke without triggering on water vapor thanks to a bi-spectral optical sensor equipped with blue and infrared LEDs. The LEDs emit light at different wavelengths, enabling the sensor to distinguish the particle size of airborne aerosols and react exclusively to actual smoke.
The sensor's smoke chamber is sealed against dust, dirt, and insects. Even if dust enters the chamber, it does not impair detection capabilities. The optical system is calibrated so non-volatile particles or insects cannot intersect both beams simultaneously to produce false alarms.

Rapid Temperature Rise Detection

Two integrated thermistors are dedicated to heat detection. The thermistors are located externally on the housing for faster thermal response.
If room temperature exceeds 64°C or increases at a rate of 10°C per minute or faster, the sensor identifies this as a rapid temperature rise and initiates an alarm. The thermal alarm triggers independently even in the absence of smoke.

Interconnected Fire Alarm (Synchronous Alarm)

The detector supports interconnected fire alarms. This function activates the integrated sirens of all Ajax fire detectors in the system when any single unit triggers. In the event of a fire, this ensures timely notification across the entire facility.
FireProtect 2 detectors feature an enhanced synchronous alarm algorithm that sounds all system fire detector sirens within 20 seconds. This feature requires operation with an Ajax hub.

Autonomous Standalone Operation

FireProtect 2 detectors can also function autonomously without an Ajax hub. In standalone mode, the detector signals fire events via its built-in siren and LED indicators, but does not send push notifications to user smartphones, Ajax Translator, or PRO Desktop software.

Manual and Automated Self-Testing

FireProtect 2 continuously monitors battery health and sensor integrity. In the event of a fault, the hub instantly notifies users and the central monitoring station, while the detector activates audible and visual alerts via its built-in buzzer and LEDs. Device statuses can be audited at any time in Ajax apps.
The unit features a manual test mode initiated by pressing the front panel. The front cover integrates a mechanical test button that can be actuated by hand or using a pole. The test verifies sensor operation and sounds the siren, allowing installers to confirm readiness and demonstrate alarm tones to clients.

Jeweller Wireless Communication Technology

Jeweller is a proprietary two-way radio protocol designed for rapid and dependable communication between the hub and connected devices. It delivers a wireless transmission range of up to 1,700 m in open terrain, making it suitable for large commercial or industrial sites.
Jeweller manages the transmission of alarms and system events, ensuring interconnected fire alarms propagate within 20 seconds. With Jeweller, monitoring stations and users have continuous real-time device telemetry in Ajax software.

Quick Installation and Pairing

Installing FireProtect 2 requires no disassembly of the housing. Replaceable or sealed batteries come pre-installed, and the SmartBracket mounting plate detaches without tools. The SmartBracket provides 90° rotational freedom, allowing precise leveling after fastening.
The detector pairs with the Ajax security ecosystem in under a minute: scan the QR code in the Ajax app and assign the detector to a room and security partition.


Manufacturer
Ajax
Brand
Ajax
Detector type
Wireless
Sensor type
Combined multi-sensor
Model
FireProtect 2 RB (Heat/Smoke)
Control panel connection
Wireless
Wireless signal range
1700 m
Detectable gases
None
Compatibility
Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub Hybrid (2G), Hub Hybrid (4G), ReX, ReX 2
Communication
Jeweller communication technology
Proprietary wireless technology for transmission of alarms and events.
Features:
- Two-way communication.
- Device spoofing prevention.
- Block encryption with floating key.
- Instant push notifications.
- Remote configuration via Ajax apps.

Frequency bands
868.0 – 868.6 MHz

Maximum Effective Radiated Power (ERP)
up to 20 mW
Automatic RF power management for energy conservation and interference minimization.

Radio modulation
GFSK

Radio transmission distance
up to 1700 m
Between detector and hub (or radio range extender) in line of sight.

Wireless encryption
All telemetry and stored data protected by block encryption with floating key.

Frequency hopping
Anti-jamming and RF interference prevention.
Sensing elements
Smoke sensor, Temperature sensor
Smoke Detection
Sensing element
Dual-spectrum optical sensor
Identifies smoke by airborne particle size.

False alarm immunity
Immune to water vapor.

Patented smoke chamber
Protects smoke optical sensor against dust, contaminants, and insects.
Heat Detection
Sensing element
Class A1 rate-of-rise thermal sensor
Compliant with EN 54-5 and BS 5446-2 standards.

Static temperature alarm threshold
at temperatures above 64°C

Rate-of-rise thermal alarm
when temperature increases by more than 10°C in 1 minute (or faster)
Anti-tamper protection
Tamper switch
Alerts on attempts to detach detector from mounting surface or remove bracket.

Spoofing protection
Device authentication

Connection loss detection
Within 15 minutes
Detection time depends on polling intervals and packet loss thresholds (set in Jeweller parameters). Fixed polling period: 300 s.
Additional Features
Built-in siren
Sound pressure: 85 dB at 3 m
Acoustic alarm signaling active until reset or acknowledged by user.

Interconnected fire alarms
All networked fire detectors sound built-in sirens when any single unit detects a fire. Interconnection activates within one hub-detector polling cycle (up to 20 seconds).

LED Indication
Green - Power indication
Flashes once every 56 seconds in compliance with EN 50291.
Yellow - Fault / Trouble indication
Flashes upon malfunction (low battery, contaminated chamber, or end of service life).
Red - Fire alarm indication
Flashes when smoke or critical heat is detected.

Front panel test button
In standby mode, runs smoke chamber self-test. During alarm or fault condition, mutes the siren.
Operating temperature range
0°C to +50°C
Operating humidity
up to 80% non-condensing
Ingress protection
IP20
Power supply
2 x CR123A
Dimensions
123.7 × 123.7 × 44.7 mm
Weight
TBC g
Color
White

Specifications

Model
Wireless Smoke and Heat Detector FireProtect 2 RB (Heat/Smoke) black
SKU
FireProtect 2 RB (30294)
Modification
Wireless Smoke and Heat Detector FireProtect 2 RB (Heat/Smoke) black
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog