Ajax Hub 2 (2G) black security control panel
Ajax
8,799 ₴

SKU WaterStop 3/4" black
WaterStop Jeweller is a remote-controlled water shut-off valve. It operates as part of an automated anti-flood system based on Ajax. With WaterStop, water supply can be shut off remotely at any facility protected by an Ajax security system. The device combines a high-quality Bonomi shut-off valve with a powerful electric actuator and control unit. It connects to the hub via the secure Jeweller radio protocol. WaterStop can be controlled from anywhere in the world with internet access—Ajax apps allow checking the status and toggling valve position at any moment.
WaterStop is designed for remote water supply management on premises. The unit integrates a shut-off valve and an actuator. Control WaterStop from anywhere globally with internet connectivity—Ajax apps show device state and operate valve position on demand. Triggered by LeaksProtect or a third-party leak detector, WaterStop automatically shuts off water within 5 seconds. All system users receive alarm and scenario notifications. Beyond leak sensor triggers, the installation engineer can configure water shut-off on a schedule or upon arming mode changes.
The WaterStop actuator delivers up to 10 N•m of torque. This torque enables closing a stuck shut-off valve without damaging it, and closing standard valves within 5 seconds of command. Water flow can be managed not only through apps and automation scenarios, but also manually. For this purpose, WaterStop features a button on the housing and a manual lever on the valve mounting platform. This is convenient during actuator replacement or plumbing servicing. Valve status is visible in Ajax apps, indicated by the backlit Ajax logo color on the enclosure, or by the position of the lever.
The unit comes equipped with a Bonomi valve suitable for both hot and cold water. WaterStop is compatible with shut-off valves compliant with the ISO 5211 standard. A plumber can easily install a standardized valve beforehand, after which an installation engineer adds the device to the system. Relocating WaterStop is straightforward: remove the actuator and fit it onto another compatible valve at the new premises. The actuator detaches from the shut-off valve in seconds without tools.
Scenarios eliminate routine tasks and automate water shut-off.
Scenarios can be used to manage water supply:
By alarm – triggered by a LeaksProtect flood detector.
By schedule – to shut off water at specific times.
By arming mode change – when the facility is armed or disarmed.
By pressing LightSwitch – for instance, when the last employee leaves the office.
By pressing Button – for manual emergency water cutoff.
By temperature – to shut off water in heating pipes for the winter.
Jeweller is a radio protocol for fast, reliable two-way communication between the hub and connected devices. The protocol provides a wireless range up to 1100 m, enabling smart valve deployment not only in large houses, but also in basements, offices, or warehouse premises. Jeweller transmits all required operational telemetry. Users retain continuous access to control the smart valve in Ajax apps regardless of device count in the system, and can verify valve status—open or closed—at any moment.
WaterStop can be installed in offices, restaurants, cafes, and other public venues. To prevent unauthorized disassembly, an alternative mounting clip is provided. This bracket replaces the standard clip to prevent actuator removal, requiring tools to extract. When the electric actuator is detached from the shut-off valve, a tamper switch is triggered. The hub regularly polls connected devices and notifies about loss of connection with any unit. Connection loss notifications are sent to all users and the Central Monitoring Station (CMS).
WaterStop is a wireless device powered by pre-installed batteries. If necessary, the installer can connect an external 9 V, 2 A power supply. The actuator mounts on the valve in one of four orientations. The actuator housing does not require disassembly for installation—it locks onto the valve using a bracket without tools, eliminating risks of damaging the electronics.
WaterStop is installed by two specialists: a plumber and an installation engineer. The product is engineered for collaborative workflow efficiency. A plumber can mount a standard compatible valve independently without the alarm engineer, needing only the dimensions of the valve actuator platform. The installer can then arrive later, mount the actuator, and integrate it into the Ajax security system. The device pairs with Ajax in under a minute: scan the QR code in the Ajax app, assign the device to a room and group.
Manufacturer
Ajax
Sensor type
Wireless
Thread size
¾″ (20 mm)
Wireless signal range
1100 m
Compatibility
Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub Hybrid (2G), Hub Hybrid (4G), ReX, ReX 2
Communication
Jeweller communication technology
Proprietary wireless technology for transmitting alarms and events.
Features:
- Two-way communication.
- Prevention of device spoofing.
- Block encryption with dynamic key.
- Instant notifications.
- Remote configuration via Ajax app.
Frequency bands
868.0 – 868.6 MHz
Maximum effective radiated power (ERP)
Up to 20 mW
Automatic power control to reduce power consumption and radio interference.
Radio signal modulation
GFSK
Radio communication range
Up to 1100 m
Between device and hub (or radio signal range extender) in open space.
Radio signal encryption
All stored and transmitted data is protected by block encryption with a dynamic key.
Frequency hopping
To prevent radio interference and jamming.
Shut-off valve
Applications
- Water supply
- Heating systems
Working medium
- Hot and cold water
- Non-aggressive liquids
Valve material
Brass
Connection and thread type
Female - Female
Operating pressure
40 bar
Liquid temperature range
+5 °C to +120 °C
Actuator connection flange
Mounting platform
Manufactured according to ISO 5211 standard.
Platform lever
For manual emergency water shut-off. Tool-free water management.
Actuator
Torque
Up to 10 N•m
Water shut-off speed
Up to 5 seconds
Duration may increase due to valve fouling/calcification.
Remote control
Configured and controlled via Ajax apps
Ajax apps also show device state: open/closed, battery level, external power presence, and hub connection status.
Manual control
Button on actuator housing
Toggles valve open/closed on press.
Sabotage protection
Device spoofing prevention
Device authentication
Connection loss detection
From 36 seconds
Detection time depends on Jeweller (or Jeweller/Fibra) settings.
Additional features
Installation
- Quick tool-free actuator mounting and release on flange
- 4 mounting orientations on the flange
- Mounting brackets for unauthorized detachment prevention
The design allows mounting, maintenance, and repair in hard-to-reach locations: shafts, utility boxes, wall cavities. The actuator block can be replaced without removing the shut-off valve. Detaches without tools.
LED indication
The backlit Ajax logo LED color indicates actuator status.
Scenarios
- Alarm responses
- Arming mode change responses
- Scheduled actions
- Button click triggers
- Temperature-based actions
- LightSwitch click triggers
Thermal protection
Actuator is protected against overheating. Operates in ambient temperatures up to 60 °C at installation site.
Operating temperature range
0 °C to +50 °C
Operating humidity
Up to 95%
Protection class
IP56
Power supply
4 × CR123A
Dimensions
104 × 150 × 70 mm
Weight
1012 g
Color
Black
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.