Eldom Favourite 72280 Electric Water Heater 150 L
Eldom
8,660 ₴
1 / 5SKU 000004215
The CUBE storage water heater model is designed for vertical installation only. The water heater design ensures tank filling with water and its heating in automatic mode.
The inner tank of the water heater is made of high-quality steel, withstanding significant mechanical stress. For corrosion protection, the steel is coated with a layer of titanium enamel with an increased content of titanium and chromium, guaranteeing complete protection even against the hardest tap water. The inner tank has a special bioglass-porcelain coating made using Surely technology, which reliably protects the inner surface from corrosion.
Dense, environmentally friendly polyurethane foam thermal insulation (density 36 kg/cm3), which does not contain freon, gives the product thermos properties and ensures the highest possible operating economy. An adjustable double-protection thermostat strictly maintains the set hot water temperature and automatically blocks the heater in case of overheating. A protective cover protects the heating unit from accidental damage; all covers are made of modern high-strength polymeric materials. This allows easy removal of dust and moisture from the surface and prevents the likelihood of electric shock. A safety valve prevents water leakage into the pipeline and serves to discharge excess water pressure in the tank.
A replaceable magnesium anode provides internal protection against electrochemical corrosion. The entire electrical unit, including the heating element, thermostat, and replaceable magnesium anode, is assembled on a steel flange, which is attached to the tank using heavy-duty bolts. Water heating in models marked with DT (dry heating element) is carried out by two DRY heating elements made of AISI 316 stainless steel, which are placed in a special protective flask and do not contact with water.
Thanks to the protective flask, the heating elements are not subject to scale formation, do not require cleaning, and last much longer on average, and there is also no need to drain water from the tank when replacing the heating element. 2 independent heating elements made of AISI 316 stainless steel are installed on one flange.
Water in the water heater is heated to the set temperature. When the hot water tap is opened, cold water begins to enter the water heater from the bottom through the cold water supply pipe. Cold water displaces the previously heated water through the hot water outlet pipe coming from the upper part of the apparatus. Thus, hot water flows to the consumer, and the water heater fills with cold water from the bottom. The heating element begins to heat the water to the set temperature again. The design of the water storage tank prevents mixing of cold and heated water layers. Due to this device, the hot water utilization coefficient is significantly increased and sharp temperature drops are completely eliminated.
Heating temperature (from 30 to 75 °C) with an interval of 1 °C. Set the required temperature. Adjust the water heater knob to set the heating temperature of the inner tank. The maximum water temperature is set to 75 °C. The temperature control knob OFF means power off, HIGH means high temperature. Turn the knob clockwise to increase the temperature setting. Once the maximum temperature value is reached, the knob no longer turns. Gradually turn the knob counterclockwise to decrease the temperature setting. Once the minimum temperature value is reached, if you continue to turn the water temperature knob, the water heater will stop heating. When the water heater is turned on, the Power indicator lights up. A display is located on the control panel, showing the current water temperature.
After setting the water heating temperature, you need to select the operating mode of the heating elements:
- economy mode (0.8 kW with dry heating element)
- standard mode (1.3 kW with dry heating element)
- both buttons pressed activates accelerated mode (2.0 kW) The water heater automatically uses the selected power to heat water in the tank.
The boiler is equipped with an RCD (residual current device) for personal protection against potential electric shock while using the electric water heater.
The residual current device measures input and output current; if they are equal, everything is fine and the appliance connected to the RCD operates, but as soon as current begins to leak to the casing, the RCD instantly disconnects the appliance via a relay. An RCD is installed to prevent electric shock, and the protection will disconnect the 220V power supply faster than a person can feel the shock.
Warranty: 12 months official manufacturer warranty on electrical components + 36 months on the tank
Package contents:
Water heater - 1 pc.
Safety valve - 1 pc.
Operation manual - 1 pc.
Packaging - 1 pc.
Mounting anchors - 2 pcs.
Drain tube - 1 pc.
RCD
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.