DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Volter 1-phase stabilizer SMART SNPTO SmartOnline-41 / 3

Volter 1-phase stabilizer SMART SNPTO SmartOnline-4

SKU 40501

Description

Smart On-Line — Double Conversion Principle

Smart On-Line stabilizers are built on the principle of double conversion. This method is one of the most effective ways to make the output voltage completely independent of the state of the input mains supply.

Even with severe power grid instability, presence of noise or input signal distortion, the input voltage is first converted into direct current (DC), preventing all negative factors from being transmitted to the output.

Stages of Double Conversion Operation

  • First stage — using a rectifier with a Power Factor Corrector (PFC), DC capacitor charging is performed. The power factor corrector is necessary to reduce impulse loads and prevent power grid overload.
  • Second stage — using Pulse-Width Modulation (PWM) from the DC voltage, an output alternating voltage of ideal sinusoidal waveform is formed.

Stability and Load Compatibility

The stabilizer works equally effectively with active, capacitive, and inductive loads, maintaining a stable voltage level with a deviation of no more than 1% from the user-set value.

A constant frequency of 50 Hz is also ensured, completely independent of input voltage fluctuations.

Clean Signal and Generator Operation

The stabilizer is capable of providing a clean output signal without interference at any given time. When connected to a generator, the device generates a correct sinusoidal voltage waveform.

This is especially important when working with asynchronous motors and transformer power supplies, as distorted voltage waveforms lead to their overheating and reduced service life.

Application Area

The constancy of the output voltage combined with a wide range of input values makes double energy conversion stabilizers an optimal and reliable solution for:

  • servers;
  • industrial controllers;
  • sensitive and critical electronic equipment.

Smart On-Line — Double Conversion Principle

Smart On-Line stabilizers are built on the principle of double conversion. This method is one of the most effective ways to make the output voltage completely independent of the state of the input mains supply.

Even under conditions of severe network instability, presence of noise or input signal distortion, the voltage is first converted into direct current (DC), and all negative factors are not transmitted to the output.

Stages of Double Conversion Operation

  • First stage — using a rectifier with a Power Factor Corrector (PFC), DC capacitor charging is performed. The power factor corrector is necessary to reduce impulse loads and prevent power grid overload.
  • Second stage — using Pulse-Width Modulation (PWM) from the DC voltage, an output alternating voltage of ideal sinusoidal waveform is formed.

Stability and Load Compatibility

The stabilizer works equally effectively with active, capacitive, and inductive loads, maintaining a stable voltage level with a deviation of no more than 1% from the user-set value.

A constant frequency of 50 Hz is also ensured, independently of input voltage fluctuations.

Clean Signal and Generator Operation

The stabilizer is capable of delivering a clean output signal without interference at any time. When connected to a generator, the device generates a correct sinusoidal voltage waveform.

This is especially important when operating with asynchronous motors and transformer power supplies, since a distorted voltage waveform leads to their overheating and shortened service life.

Application Scope

The constancy of the output voltage combined with a wide range of input values makes double energy conversion stabilizers an optimal and reliable solution for:

  • servers;
  • industrial controllers;
  • sensitive and critical electronic equipment.

Specifications

Technical Specifications

Type
double conversion
Output voltage, V
200-240
Input range, V
130-330
Maximum power, kW
3.5
Max. power at Umin, kW
2.0
Efficiency, %
92
Output voltage, custom, V
1-240
Output frequency, Hz
50
Output frequency, custom, Hz
50-120, with 1 Hz step
Stabilization accuracy, %
1
Shutdown at Umin, V
125
Shutdown at Umax, V
300
Maximum current, A
25
Warranty, months
60
Dimensions (HxWxD), mm
700 x 320 x 120
Weight, kg
14.5

General Information

Model
Volter 1-phase stabilizer SMART SNPTO SmartOnline-4
SKU
40501
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog