DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Voltage stabilizer LP-W-3500RD EU (2100W/7 steps)1 / 5

Voltage stabilizer LP-W-3500RD EU (2100W/7 steps)

SKU 40278

Description

Single-phase voltage stabilizer LP-W-3500RD EU (2100W / 7 steps) relay type

  • is an electronic device designed to stabilize the voltage of a single-phase electrical grid.

This type of home voltage rectifier uses relays and other electronic components to maintain the output voltage within an acceptable range.

Single-phase voltage stabilizers are designed for use in residential, office, and other small electrical systems where protection against voltage fluctuations is required.

They are installed in cases when:

  • A significant voltage drop is constantly observed in the grid. In this case, household appliances, computers, and other electrical devices will work less efficiently and consume more energy, resulting in additional costs;

  • The voltage exceeds standard values. Overvoltage is very dangerous for sensitive devices (computers, TVs, and other expensive equipment), which can fail even during a short-term voltage surge;

  • There is a risk of equipment failure or fire due to a short circuit in the grid.

To prevent possible equipment damage and ensure the safety of your home, we recommend purchasing a voltage stabilizer.

How does a voltage stabilizer for an apartment work?

The relay mechanism in a single-phase voltage stabilizer is used to switch the transformer windings that regulate voltage, depending on the set parameters. When the input voltage goes beyond the specified range, the relay is automatically activated to correct the output voltage.

The step-switching relay mechanism allows automatic adjustment of the output voltage at certain levels, usually within small steps.

The single-phase voltage stabilizer for an apartment has 7 relay switching steps, which allows for output voltage regulation, minimizing fluctuations and providing optimal conditions for connected devices.

How to correctly choose a voltage stabilizer for your home?

Output power depends on the total load of the system and is determined individually for each facility.

Operating voltage ranges may vary depending on the specific model and manufacturer.

Speed and accuracy of response determine the stabilizer's ability to quickly react to changes in input voltage and maintain a stable output voltage with high precision.

Installing a 230V home voltage stabilizer requires compliance with certain rules and procedures to ensure efficient and safe system operation.

Basic rules for installing a voltage stabilizer:

  • Choice of installation location. The stabilizer must be installed in a clean, dry, and well-ventilated room, protected from moisture and dust. It is recommended to install the stabilizer in non-residential areas and close to the electrical panel;

  • Correct connection. Connecting the voltage stabilizer for a house/apartment/office must be performed by a qualified electrician with the appropriate clearance level. When installing the stabilizer, the manufacturer's instructions must be strictly followed. All electrical connections must be made using appropriate wires and contacts;

  • Grounding. The home stabilizer must be securely grounded to prevent potential electric shock and ensure system safety;

  • Optimal load. Before installing the stabilizer, make sure its capacity corresponds to the load it will serve. Overloading the stabilizer can lead to failure or inefficient operation;

  • Safety. When working with electrical equipment, safety precautions must always be observed, including the use of protective clothing and personal protective equipment, as well as disconnecting the power supply before starting any work.

Specifications

Technical Specifications

Type
relay
Power, VA/W
3500/2100
Output voltage, V
230±5%
Number of steps
7
Number of outputs
2
Minimum input voltage, V
100
Maximum input voltage, V
260
Number of phases
1
Frequency range, Hz
50/60
Transit mode
no
Delay function, sec
from 6 to 180 (selectable)
Installation type
wall-mounted
Grid connection type
Europlug
Consumer connection type
Schuko socket
Protection against
high and low voltage, overload, short circuit
Indication type
LED
Cooling
active
Enclosure material
metal
Operating temperature, °C
0 ~ +40
Warranty, months
24
Color
white
Length, mm
225
Width, mm
125
Height, mm
235
Weight, kg
4.3

General Information

Model
Voltage stabilizer LP-W-3500RD EU (2100W/7 steps)
SKU
40278
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog