DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Voltage Stabilizer Elex Amper U 12-1/63 v2.11 / 5

Voltage Stabilizer Elex Amper U 12-1/63 v2.1

SKU 6900169210019

Description

The single-phase voltage stabilizer Amper U 12-1/63 v2.1 (standard) is designed for operation in electrical grids with voltage fluctuations ranging from 145 to 275 V. Within this range, the device is guaranteed to deliver an output voltage within 220 V ±3.5%, achieved through the use of 12 stabilization stages. The rated power of this model is 14 kW, which corresponds to an operating current of its 63 A circuit breaker.

Features of this stabilizer include a dual LED display, a linear load bar, electronic transit (bypass), convenient terminal block placement on the rear panel, and silent operation due to the use of thyristor power switches.

The Amper U 12-1/63 v2.1 stabilizer features manual adjustment of the lower cutoff threshold (60-135 V). This function is required for loads with high starting currents, during which severe voltage sags and stabilizer shutdown might occur. When this option is activated, the stabilizer allows starting any motor or pump even during grid voltage sags down to 60 V for up to one minute.

It is recommended to install and operate the Amper U 12-1/63 v2.1 stabilizer in dry, heated rooms. Wall mounting should be performed in a vertical position (with fans facing upward), leaving 10-15 cm of clearance above and below for cooling. Connection is made to existing wiring via the terminal block.

Specifications

Technical Specifications

Rated Power, VA/W
14000/14000
Number of Stabilization Stages
12
Stabilizer Efficiency not less than, %
98
Nominal Output Voltage, V
220
Minimum Operating Input Voltage, V
100
Maximum Operating Input Voltage, V
295
Supply Frequency, Hz
45-65
Forced Cooling
two-speed fan
Weight, kg
26
Operating Current, A
63
No-load Power Consumption not more than, W
35
Stabilization Accuracy, %
3.5
Input Voltage Response Time, ms
20
Input Current and Apparent Power Measurement
yes
Short-Circuit and Overload Protection
input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass
yes
Grid and Stabilizer Status Analyzer
yes
Switch Type
thyristor
Lower Cutoff Threshold Adjustment, V
60-135
Overheating Protection
yes
Redundant Overvoltage Protection
yes
Control Microcontroller
yes
Input Choke
yes
Output Choke
no
Minimum Cable Conductor Cross-Section for Connection, mm²
10
Maximum Cable Conductor Cross-Section for Connection, mm²
40
Warranty, months
36
Length, mm
295
Width, mm
165
Height, mm
530

General Information

Model
Voltage Stabilizer Elex Amper U 12-1/63 v2.1
SKU
6900169210019
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog