DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
UPS with pure sine wave 12V LPE-B-PSW-1500VA+ (1000W) 1-35A1 / 4

UPS with pure sine wave 12V LPE-B-PSW-1500VA+ (1000W) 1-35A

SKU 19408

Description

UPS with pure sine wave LPE series, 1000 W capacity

Does not have a through-neutral, not designed to work with phase-dependent equipment.

Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery in case of power outages from the general grid.

Does not have a through-neutral, not designed to work with phase-dependent equipment.

Ensuring stable and uninterrupted power supply for your equipment

When using a UPS with a pure sine wave and an external battery, the equipment operates under optimal conditions both during power outages and when operating from the general grid. Mode switching occurs automatically. Equipment connected to the UPS does not have time to turn off, as the switching speed is fractions of a second.

Uninterruptible power supply for computers, TVs...

Protect expensive equipment from sudden voltage surges in the grid

In the event of a partial external power outage rather than a complete failure, simply dropping the voltage level in the grid, using the built-in relay voltage stabilizer, the UPS step-by-step raises the voltage, thereby protecting the connected load from low grid voltage. At high voltage, the stabilizer reduces it. This is especially important for sensitive devices (computers, TVs, network devices, etc.).

LPE Series Features:

  • Pure sine wave output.
  • Microprocessor control.
  • Suitable for all types of loads, such as resistive, inductive, rectified loads, and motors.
  • Charge current and voltage are set in the menu on the front panel.
  • Configurable no-load shutdown and energy-saving mode.
  • Protection against short circuit, overload, and low battery charge.
  • Intelligent long backup time.
  • Generator compatibility and inverter/generator configuration capability.

Where are uninterruptible power supplies with pure sine 12V LPE-B-PSW-1500VA+ (1000W) 1-35A with an external battery used?

Audio and video equipment:

  • To reduce grid interference and noise. This improves the quality of audio and video recordings and increases the efficiency of studio equipment.
  • To maintain uninterrupted operation of professional equipment such as mixers, amplifiers, and speakers.

Industrial equipment:

  • To ensure the continuity of production processes by installing uninterruptible power supplies for controllers, automated systems, and other essential electrical equipment.
  • To maintain stable operation of production equipment without short circuits, overheating, and wear of safety units.

Home appliances:

Uninterruptible power supply for computers, TVs, refrigerators, air conditioners, security systems..

  • To provide uninterrupted power supply for computers, TVs, refrigerators, air conditioners, security systems, and other household appliances during power outages.

UPS with pure sine wave and external battery are used for:

  • as uninterruptible power supplies for gas NON-PHASE-DEPENDENT or solid-fuel NON-PHASE-DEPENDENT heating boilers;
  • UPS for emergency lighting;
  • to provide backup power for server stations and telecommunication equipment;
  • UPS with pure sine wave for circulation pumps;
  • as a voltage stabilizer with a backup power source for powerful and high-speed computers.

The UPS with pure sine wave 12V LPE-B-PSW-1500VA+ (1000W) 1-35A allows connecting a battery with a capacity of 20 Ah for low-current load such as a single circulation pump of 45-60 W. You can also connect a battery with a capacity from 150 Ah (depending on the model) to increase the backup power time.

The UPS must be used only together with a rechargeable battery (battery is not included), which must match the technical characteristics of the device.

Types of external rechargeable batteries that can be connected to the UPS:

Types of external rechargeable batteries that can be connected to the UPS

Connection diagrams of the UPS with pure sine wave 12V LPE-B-PSW-1500VA+ (1000W) 1-35A

Connection scheme via 230V grid will allow you to quickly connect only the necessary devices.

UPS connection schemes with pure sine wave via socket

3 steps to connect the UPS via socket:

  • Connect the battery observing polarity;
  • Connect the UPS to the grid by plugging the UPS plug into a 230V socket;
  • Wait for the self-diagnostics to finish and the UPS to turn on.

Caution! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnostics!

Selection of UPS for heating boilers and emergency lighting systems

Before buying a UPS with a pure (clean) sine wave, you must consider the following technical characteristics:

  • Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each unit of equipment.

  • Inrush power - the amount of electricity consumed by the device when turned on. To connect a UPS to equipment with high inrush currents, it is necessary to choose a more powerful uninterruptible power supply model.

  • The backup operation time of the pump from the battery required by you. Determined by the individual needs of the consumer. For long-term backup operation, you should choose a UPS with a pure sine wave output to which an external battery can be connected.

CAUTION! This UPS lacks a "through-neutral". Please make sure that your heating boiler does not require a uninterruptible power supply with a "through-neutral".

To ensure your uninterruptible power supply with an external battery works long and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid errors during device care and maintenance.

Specifications

Technical Specifications

Type
line-interactive with pure sine wave
Series
LPE
Power, VA/W
1500/1000
Nominal battery voltage, V
12
Grid charging current, A
1-35
Installation
floor-standing
Number of outputs
2
Number of phases
1
Output voltage waveform
pure sine wave
Input voltage range, V
150V -282V at set output voltage 220V, 156V -294V at set out volt 230V, 163V -307V at set volt 240V
Output voltage, V
220/230/240±5%
Frequency range, Hz
50/60
Input frequency range, Hz
±10% (5% and 15% selectable)
Switching time, ms
10
Efficiency, %
95
Grid connection type
Euro plug
Load connection type to UPS
Euro socket
Battery connection type to UPS
terminals
AVR voltage stabilization function
yes
Protection
overload, overvoltage, short circuit, overcharge, overheating, low battery charge
Indication type
LCD
Operating temperature, °C
0 ~ +40
Enclosure material
metal
Warranty, months
24
Color
black
Length, mm
295
Width, mm
285
Height, mm
165
Weight, kg
13.025

General Information

Model
UPS with pure sine wave 12V LPE-B-PSW-1500VA+ (1000W) 1-35A
SKU
19408
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog