DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
UPS with pure sine wave 12V LPE-B-PSW-1000VA+ (600W) 1-25A1 / 4

UPS with pure sine wave 12V LPE-B-PSW-1000VA+ (600W) 1-25A

SKU 19407

Description

UPS with pure sine wave of LPE series with a capacity of 600 W

Does not have a pass-through neutral, is not designed to work with phase-dependent equipment.

Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery in case of power outages from the general grid.

Does not have a pass-through neutral, is not designed to work with phase-dependent equipment.

Ensuring stable and uninterrupted power for your equipment

When using a UPS with a pure sine wave and an external battery, the equipment operates under optimal conditions, both during power outages and when operating from the general grid. Mode switching occurs automatically. Equipment connected to the UPS does not have time to turn off, as the switching speed is fractions of a second.

Uninterruptible power supply for computers, TVs...

Protect expensive equipment from sudden power surges in the grid

In case of a partial power outage rather than a complete external power failure, simply a drop in the grid voltage level, using the built-in relay voltage stabilizer, the UPS step-by-step boosts the voltage, thereby protecting the connected load from low grid voltage. In case of high voltage, the stabilizer reduces it. This is especially important for sensitive devices (computers, TVs, network devices, etc.).

LPE Series Features:

  • Pure sine wave output.
  • Microprocessor control.
  • Suitable for all types of loads, such as resistive, inductive, rectified loads, and motors.
  • Charging current and voltage are set in the menu on the front panel.
  • Configurable no-load shutdown and energy-saving mode.
  • Protection against short circuit, overload, and low battery charge.
  • Intelligent long backup runtime.
  • Generator compatibility and ability to configure inverter and generator.

Where are uninterruptible power supplies with pure sine 12V LPE-B-PSW-1000VA+ (600W) 1-25A with an external battery used?

Audio and video equipment:

  • To reduce grid interference and noise. This improves the quality of audio and video recordings, and increases the efficiency of studio equipment.
  • To maintain uninterrupted operation of professional equipment such as mixers, amplifiers, and speakers.

Industrial equipment:

  • To ensure continuity of production processes by installing uninterruptible power supplies for controllers, automated systems, and other critical electrical equipment.
  • To maintain stable operation of production equipment without short circuits, overheating, and wear of safety units.

Home appliances:

Uninterruptible power supply for computers, TVs, refrigerators, air conditioners, security systems..

  • To provide uninterruptible power for computers, TVs, refrigerators, air conditioners, security systems, and other home appliances during power outages.

UPS with pure sine wave and external battery are used:

  • as uninterruptible power supplies for gas NON-PHASE-DEPENDENT or solid-fuel NON-PHASE-DEPENDENT heating boilers;
  • UPS for emergency lighting;
  • to provide backup power for server stations and telecommunication equipment;
  • UPS with pure sine wave for circulation pumps;
  • as a voltage stabilizer with backup power source for powerful and high-speed computers.

UPS with pure sine wave 12V LPE-B-PSW-430VA+ (300W) 1-15A allows connecting batteries with a capacity of 20 Ah for low-current load such as a single circulation pump with a capacity of 45-60 W. You can also connect a battery with a capacity of 150 Ah or more (depending on the model) to increase autonomous power runtime.

The UPS must be used only together with a storage battery (battery is not included), which must match the technical characteristics of the device.

Types of external storage batteries that can be connected to the UPS:

Types of external storage batteries that can be connected to the UPS

Connection diagrams of UPS with pure sine wave 12V LPE-B-PSW-430VA+ (300W) 1-15A

Connection scheme via 230V mains will allow quick connection of only the necessary devices.

Connection diagrams of UPS with pure sine wave via socket

3 steps to connect the UPS via socket:

  • Connect the storage battery observing polarity;
  • Connect the UPS to the mains by inserting the UPS plug into a 230V socket;
  • Wait for the self-diagnostics to finish and the UPS to turn on.

Attention! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnostics!

Selection of UPS for heating boilers and emergency lighting systems

Before buying a UPS with pure (clean) sine wave, you need to consider the following technical specifications:

  • Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each piece of equipment.

  • Inrush current / Starting power - the amount of electricity consumed by the device when turned on. To connect a UPS to equipment with high starting currents, you need to choose a more powerful uninterruptible power supply model.

  • The required autonomous runtime of the pump from the storage battery. Determined by the individual needs of the consumer. For long-term autonomous operation, you should choose a UPS with a pure sine wave output to which an external battery can be connected.

ATTENTION! This UPS lacks a "pass-through neutral". Please make sure that your heating boiler does not require an uninterruptible power supply with a "pass-through neutral".

To ensure your uninterruptible power supply with an external battery works long and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid errors during device care and maintenance.

Specifications

Technical Specifications

Type
line-interactive with pure sine wave
Series
LPE
Power, VA/W
1000/600
Rated battery voltage, V
12
Mains charging current, A
1-25
Number of outputs
2
Installation
floor-standing
Number of phases
1
Output voltage waveform
pure sine wave
Input voltage range, V
150V -282V at set output voltage 220V, 156V -294V at set output voltage 230V, 163V -307V at set...
Output voltage, V
220/230/240±5%
Input frequency range, Hz
40/70
Output frequency range, Hz
50/60
Switching time, ms
10
Efficiency, %
95
Mains connection type
Schuko plug
Load connection type to UPS
Schuko socket
Battery connection type to UPS
terminals
AVR voltage stabilization function
yes
Protection
against overload, overvoltage, short circuit, overcharging, overheating, low battery charge
Indication type
LCD
Operating temperature, °C
0 ~ +40
Enclosure material
metal
Warranty, months
24
Color
black
Length, mm
280
Width, mm
260
Height, mm
120
Weight, kg
9.07

General Information

Model
UPS with pure sine wave 12V LPE-B-PSW-1000VA+ (600W) 1-25A
SKU
19407
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog