DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Solar Power Station (SES) Premium 4.2kW Battery 6kWh LiFePO4 230 Ah1 / 4
125 213 ₴
Out of stock

Solar Power Station (SES) Premium 4.2kW Battery 6kWh LiFePO4 230 Ah

SKU 31254

Description

A mini solar power station for a dacha and home with a capacity of 4.2kW is capable of providing:

  • electrical equipment with off-grid electricity during daylight hours;
  • backup power for household and computer equipment in case of prolonged emergency power outages.

Why a turnkey solar power station is an effective replacement for fuel generators and other backup power sources?

  • The system does not require additional maintenance and does not need fuel, as the sun is an inexhaustible source of electricity;
  • MPPT controller allows using a standard UPS with a pure sine wave in the system. The MPPT controller ensures the most efficient use of alternative energy source potential. The device monitors and automatically selects the optimal ratio of current and voltage required for maximum battery power. Using an MPPT controller increases the efficiency of solar panels by 20-30%;

  • SES equipment is connected to the apartment/house/office power grid. Switching to backup power mode does not require much time and effort;
  • Convenient monitoring system for system operating parameters;
  • Long-term operation of equipment without repair and maintenance;
  • Ability to offset utility bills by consuming electricity from solar panels during daylight hours.

Solar Power Station (SES) Premium 4.2kW Battery 6kWh LiFePO4 230 Ah - included:

  • LogicPower LPW-HYGMAX-4200VA (4200W) 24V 120A MPPT 90-450V ON-OFF GRID UPS - 1 pc.
  • LP Longi Solar Half-Cell 550W Solar Panel (35 profile monocrystal) - 7 pcs.
  • LP LiFePO4 25.6V - 230 Ah (5888Wh) Battery (BMS 200A/100A) plastic LCD Smart BT - 1 pc.
  • Inter-module clamp for mounting 35 mm solar panels P - 12 pcs.
  • End clamp for mounting 35 mm solar panels - 4 pcs.
  • Combination screw-anchor 10x200 mm (kit) stainless steel - 18 pcs.
  • Cylinder head screw with internal hex M8-35 - 16 pcs.
  • M8 mounting nut with lock for mounting solar panels - 16 pcs.
  • C Solar 41x41x1.5 mm profile connector - 4 pcs.
  • Cylinder head screw with internal hex M8-16 - 8 pcs.
  • M8 flanged serrated nut - 8 pcs.
  • C Solar 41x41x1.5 mm guide profile - 18 pcs.
  • Solar power station cable H1Z2Z2-K 1*4 30 m black (male/female) - 1 pc.
  • Solar power station cable H1Z2Z2-K 1*4 30 m red (female/male) - 1 pc.
  • Copper wire for battery connection 25 sq. mm - 100 cm (with terminals) red - 1 pc.
  • Copper wire for battery connection 25 sq. mm - 100 cm (with terminals) black - 1 pc.
  • SSQ 140 "1-0-2" load switch, 1p 40A - 1 pc.
  • ETITEC M T2 PV 1100/20 Y surge protector (for PV systems) - 1 pc.
  • ETIMAT 6 2p C 32A (6 kA) circuit breaker - 1 pc.
  • 1690890 ETI KVL 00 1P 160A Switch-disconnector (M8-M8 terminals) - 1 pc.
  • 4110084 ETI NH-00 Battery 160A 80V DC fuse - 2 pcs.
  • ECT 8PT surface-mounted distribution box (8 mod. transparent door) - 2 pcs.

Solar power station: kit for Ukraine, how is the price formed?

The cost of a solar power station kit for a home depends on the type of storage batteries.

Turnkey solar power stations with a capacity of 4.2kW of the "Premium" category contain lithium iron phosphate storage batteries (LiFePO4) with a capacity of 230 Ah.

Alternative energy sources for the home: benefits of using LiFePO4 batteries

  • The charge-discharge cycle life in LiFePO4 is 7000. You won't have to think about replacing the battery for at least 10 years.
  • A maximum of 2 hours is required for a full charge of the lithium iron phosphate battery. In addition, the battery has no "memory effect", meaning the battery can be charged at any time without waiting for a full discharge.
  • Capacity loss in lithium iron phosphate batteries is about 20% when stored for over 10 years. Furthermore, this type of battery can remain in a discharged state for a long time without serious consequences for subsequent operation.

Can a home SES be installed DIY?

The included solar photovoltaic modules are fully ready for independent installation. You do not need to install additional solar panel protection means.

We recommend placing the solar panels in areas with plenty of sunlight. Avoid shade from trees or buildings on the working surface of the photocells.

Solar panels can be mounted on the roof, ground, or on special welded structures. When installing photovoltaic modules, orient them towards the south.

Mounting of the supporting structures for solar panels is carried out using appropriate fasteners on aluminum frames. Mounting holes are provided on the back side of the frames.

Observe polarity when connecting all DC electrical connections. Carefully check the polarity of the solar panels and batteries before installation using a tester.

For safe operation of the solar power station, install grounding for the mounting structures, casing, and inverter.

Specifications

Technical Specifications

Type
solar power stations
SES Type
On-Off Grid
Power, VA/W
4200/4200
Panel Type
monocrystal
Number of panels, pcs
7
Battery Type
LiFePO4
Rated Battery Voltage, V
25.6
Battery Capacity, Ah
230
Warranty, months
60

General Information

Model
Solar Power Station (SES) Premium 4.2kW Battery 6kWh LiFePO4 230 Ah
SKU
31254
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog