The HS2405X1 signal booster is specially designed for the 2.4 GHz frequency band in the IEEE 802.11 b/g/n standard and functions as a bidirectional power amplifier (for both reception and transmission). This amplifier is compatible with Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM), and other technologies. Utilizing Time-Division Duplexing (TDD) technology, rapid emission detection technology, and a linear power amplifier, it significantly extends radio communication range while maintaining IEEE 802.11 b/g/n data transmission rates.
Transmission gain is 13 dB, which can increase radiated power by 20 times and significantly extend communication range.
Noise figure is less than 2.5 dB, which, combined with a 25 dB receive gain, significantly increases sensitivity and effective reception distance. mW, which substantially expands the radio system coverage radius.
An ultra-wide supply voltage range from 6 to 55 V allows for easy integration into existing engineering systems.
Easy to use: connect the cable from the modem, the antenna, and the power supply, and it is ready for operation.
The duralumin casing provides high mechanical strength and acts as an efficient heat sink.
Installation procedure:
1) De-energize the receiver (access point/router/radio modem)
2) Remove the antenna from the receiver
3) Using an RG316 feeder cable, connect the receiver antenna output to the RFIN input of the amplifier
5) Connect power to the amplifier first, then to the receiver
Specifications:
- Operating frequency range: 2400 - 2500 MHz
- Supply voltage: 6 - 15 V
- Current consumption: 575 mA at 12 V and 29 dBm output power
- Receive gain: 25 ? 13 ± 1 dB
- Input signal level: 3 - 20 dBm
- Maximum output power (P1dB): 37 dBm (5 W)
- Error Vector Magnitude (EVM): 3% at 29 dBm 802.11g 54 Mbps OFDM 64QAM 20 MHz bandwidth
- Noise figure: less than 2.5 dB
- Input connector: SMA Female RP-SMA Female (jack)
- Tx/Rx switching time: less than 1 µs
- Indication: Red - receive, Green - transmit
- Ambient temperature: -40 - +70 °C
- Operating humidity: less than 95% 103.5x96.5x30.5 mm
- Weight: 266 g
Package contents:
- Amplifier - 1 pc
- Dipole antenna - 1 pc
- SMA Male (plug) - RP-SMA Male (plug) adapter 10 cm - 1 pc
- Power supply 12 V 1.5 A DC 5/2 mm - 1 pc
- Warranty card - 1 pc
Specifications:
- Operating frequency range: 2400 - 2500 MHz
- Supply voltage: 6 - 15 V
- Current consumption: 575 mA at 12 V and 29 dBm output power
- Receive gain: 25 ± 1 dB
- Input signal level: 3 – 20 dBm
- Maximum output power (P1dB): 37 dBm (5 W)
- Error Vector Magnitude (EVM): 3% at 29 dBm 60 25 dBm 80. bandwidth 20 MHz
- Noise figure: less than 2.5 dB
- Input connector: SMA Female (jack)
- Output connector: RP-SMA Female (jack)
- Switching time receive/transmit: less than 1: Green - transmit
- Ambient temperature: -40 - +70 °C
- Operating humidity: less than 95%
- Dimensions: 103.5x96.5x30.5 mm
- Weight: 266 g
Package contents:
- Amplifier - 1 pc
- Dipole antenna - 1 pc
- SMA Male (plug) - RP-SMA Male (plug) adapter 10 cm - 1 pc
- Power supply 12 V 1.5 A DC 5/2 mm - 1 pc
- Warranty card - 1 pc