DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Pure Sine Wave UPS 24V LPE-W-PSW-5000VA+ (3500W) 1-50A1 / 5

Pure Sine Wave UPS 24V LPE-W-PSW-5000VA+ (3500W) 1-50A

SKU 19411

Description

LPE Series Pure Sine Wave UPS 3500W

Does not have a pass-through neutral, not intended for use with phase-dependent equipment.

Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery during power outages from the general grid.

Does not have a pass-through neutral, not intended for use with phase-dependent equipment.

Ensuring stable and uninterrupted power for your equipment

When using a pure sine wave UPS and an external battery, the equipment operates under optimal conditions both during power outages and when operating from the general grid. Switching operating modes occurs automatically. Equipment connected to the UPS does not have time to turn off, as the switching speed is fractions of a second.

UPS + battery

Uninterruptible power supply for computers, TVs...

Protect expensive equipment from sharp voltage surges in the grid

In the case of a partial external power outage rather than a complete one, or simply a drop in the grid voltage level, using the built-in relay voltage stabilizer, the UPS step-by-step raises the voltage, thereby protecting the connected load from low voltage in the grid. In case of high voltage, the stabilizer lowers it. This is especially important for sensitive devices (computers, TVs, network devices, etc.).

LPE Series Features:

  • Pure sine wave output.
  • Microprocessor control.
  • Suitable for all types of loads, such as resistive, inductive, rectified loads, and motors.
  • Charge current and voltage are set in the menu on the front panel.
  • Configurable no-load shutdown and power-saving mode.
  • Protection against short circuit, overload, and low battery.
  • Intelligent long backup time.
  • Generator compatibility and ability to configure inverter and generator.

Where are uninterruptible power supplies with pure sine wave 24V LPE-W-PSW-5000VA+ (3500W) 1-50A with external battery used?

Audio and video equipment:

  • To reduce grid interference and noise. This improves the quality of audio and video recordings, and increases the efficiency of studio equipment.
  • To maintain uninterrupted operation of professional equipment such as mixers, amplifiers, and speakers.

Industrial equipment:

  • To ensure continuity of production processes by installing uninterruptible power supplies for controllers, automated systems, and other critical electrical equipment.
  • To maintain stable operation of production equipment without short circuits, overheating, and wear of safety units.

Home appliances:

Uninterruptible power supply for computers, TVs, refrigerators, air conditioners, security systems..

  • To provide uninterrupted power for computers, TVs, refrigerators, air conditioners, security systems, and other home appliances during power outages.

Pure sine wave UPS with external battery are used:

  • as uninterruptible power supplies for gas NON-PHASE-DEPENDENT or solid fuel NON-PHASE-DEPENDENT heating boilers;
  • UPS for emergency lighting;
  • to provide backup power for server stations and telecommunication equipment;
  • UPS with pure sine wave for circulation pumps;
  • as a voltage stabilizer with a backup power source for powerful and high-speed computers.

The pure sine wave UPS 24V LPE-W-PSW-5000VA+ (3500W) 1-50A allows connecting batteries with a capacity of 20 Ah for low-current load such as a single circulation pump with a power of 45-60 W. You can also connect batteries with a capacity of 150 Ah or more (depending on the model) to increase autonomous backup time.

The UPS must be used only together with a rechargeable battery (battery is not included), which must match the technical characteristics of the device.

Types of external rechargeable batteries that can be connected to the UPS:

Types of external rechargeable batteries that can be connected to the UPS

Connection diagrams for pure sine wave UPS 24V LPE-W-PSW-5000VA+ (3500W) 1-50A

Connection via the 230V grid will allow you to quickly connect only the necessary devices.

Connection via the electrical distribution panel will allow not only using electrical appliances in usual places, but also managing the connection through circuit breakers. Attention! Work on connecting the UPS through the electrical panel must be performed by a qualified electrician with the appropriate qualification norm.

UPS connection diagrams with pure sine wave

Attention! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnostics!

Choosing a UPS for heating boilers and emergency lighting systems

Before buying a UPS with a pure (clean) sine wave, you need to consider the following technical specifications:

  • Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each piece of equipment.

  • Inrush power (starting power) - the amount of electricity consumed by the device when turned on. To connect the UPS to equipment with high starting currents, you need to choose a more powerful uninterruptible power supply model.

  • The required autonomous operation time of the pump from the battery. Determined by the individual needs of the consumer. For long-term autonomous operation, you should choose a pure sine wave UPS to which an external battery can be connected.

ATTENTION! This UPS lacks a "pass-through neutral". Please make sure your heating boiler does not require a UPS with a "pass-through neutral".

To make your uninterruptible power supply with external battery work long and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid mistakes in caring for and maintaining the device.

Specifications

Technical Specifications

Type
line-interactive with pure sine wave
Series
LPE
Power, VA/W
5000/3500
Nominal battery voltage, V
24
Grid charge current, A
1-50
Number of outputs
1
Installation
wall-mounted
Number of phases
1
Output voltage waveform
pure sine wave
Input voltage range, V
150V -282V at set output voltage 220V, 156V -294V at set output voltage 230V, 163V -307V at set
Output voltage, V
220/230/240±5%
Input frequency range, Hz
40/70
Output frequency range, Hz
50/60
Switching time, ms
10
Efficiency, %
95
Grid connection type
terminals
Load connection type to UPS
terminals
Battery connection type to UPS
terminals
AVR voltage stabilization function
yes
Protection
against overload, overvoltage, short circuit, overcharging, overheating, low battery charge
Indication type
LCD
Operating temperature, °C
0 ~ +40
Enclosure material
metal
Warranty, months
24
Color
black
Length, mm
302
Width, mm
210
Height, mm
520
Weight, kg
35.875

General Information

Model
Pure Sine Wave UPS 24V LPE-W-PSW-5000VA+ (3500W) 1-50A
SKU
19411
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog