Uninterruptible Power Supply BBG-1210/8 for CCTV 12V (18Ah)
Full Energy
2,633 ₴
1 / 5SKU 19410
Does not have a through-zero (pass-through neutral), not intended for use with phase-dependent equipment.
Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery during power outages from the general grid.
Does not have a through-zero (pass-through neutral), not intended for use with phase-dependent equipment.
When using a pure sine wave UPS and an external battery, the equipment operates under optimal conditions both during power outages and when operating from the general grid. Mode switching occurs automatically. Equipment connected to the UPS does not have time to shut down, as the switching speed is a fraction of a second.


In the event of a partial external power outage rather than a complete blackout, simply dropping the voltage level in the grid, using the built-in relay voltage stabilizer, the UPS steps up the voltage, thereby protecting the connected load from low voltage in the grid. In case of high voltage, the stabilizer lowers it. This is especially important for sensitive devices (computers, TVs, network devices, etc.).
Audio and video equipment:
Industrial equipment:
Home appliances:

The pure sine wave UPS 24V LPE-W-PSW-3600VA+ (2500W) 1-40A allows connecting a battery with a capacity of 20 Ah for low-current loads such as a single circulation pump with a power of 45-60 W. You can also connect a battery with a capacity from 150 Ah (depending on the model) to increase the backup power time.
The UPS must be used only together with a rechargeable battery (battery is not included), which must comply with the technical characteristics of the device.

Connection diagrams for the pure sine wave UPS 24V LPE-W-PSW-3600VA+ (2500W) 1-40A
Connection via an electrical distribution board will allow not only using electrical appliances in usual locations, but also controlling the connection via circuit breakers. Attention! Work on connecting the UPS through the electrical panel must be performed by a qualified electrician with the appropriate clearance standard.

Attention! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnostics!
Before buying a UPS with a pure (clean) sine wave, you need to consider the following technical specifications:
Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each piece of equipment.
Inrush power (surge power) - the amount of electricity consumed by the device when turned on. To connect the UPS to equipment with high inrush currents, you need to choose a more powerful uninterruptible power supply model.
The backup time you need for the pump to operate from the battery. Determined by the individual needs of the consumer. For long-term backup operation, you should choose a pure sine wave UPS to which an external battery can be connected.
ATTENTION! This UPS lacks a "through-neutral". Please make sure your heating boiler does not require a UPS with a "through-neutral".
To ensure your uninterruptible power supply with an external battery works for a long time and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid mistakes during device care and maintenance.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.