DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Pure Sine Wave UPS 24V LPE-B-PSW-2300VA+ (1600W) 1-35A1 / 4

Pure Sine Wave UPS 24V LPE-B-PSW-2300VA+ (1600W) 1-35A

SKU 19409

Description

LPE Series Pure Sine Wave UPS 1600 W

Does not have a pass-through neutral, not designed to work with phase-dependent equipment.

Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery in case of power outages from the general grid.

Does not have a pass-through neutral, not designed to work with phase-dependent equipment.

Ensuring stable and uninterrupted power for your appliances

When using a pure sine wave UPS and an external battery, the equipment operates under optimal conditions both during power outages and when running from the general grid. Mode switching occurs automatically. Equipment connected to the UPS does not have time to shut down, as the switching speed is a fraction of a second.

Uninterruptible power supply for computers, TVs...

Protect expensive equipment from sudden voltage surges in the grid

In the event of a partial external power outage rather than a complete shutdown, accompanied by a drop in grid voltage, the built-in relay voltage stabilizer steps up the voltage, thereby protecting the connected load from low grid voltage. During high voltage, the stabilizer reduces it. This is especially important for sensitive devices (computers, TVs, network devices, etc.).

LPE Series Features:

  • Pure sine wave output.
  • Microprocessor control.
  • Suitable for all types of loads, such as resistive, inductive, rectified loads, and motors.
  • Charging current and voltage are set in the front panel menu.
  • Configurable no-load shutdown and energy-saving mode.
  • Protection against short circuit, overload, and low battery charge.
  • Intelligent extended backup time.
  • Generator compatibility and inverter/generator configuration capability.

Where are 24V LPE-B-PSW-2300VA+ (1600W) 1-35A pure sine wave uninterruptible power supplies with an external battery used?

Audio and video equipment:

  • To reduce mains noise and interference. This improves the quality of audio and video recordings and increases the efficiency of studio equipment.
  • To maintain uninterrupted operation of professional equipment such as mixers, amplifiers, and speakers.

Industrial equipment:

  • To ensure continuity of production processes by installing uninterruptible power supplies for controllers, automated systems, and other critical electrical equipment.
  • To maintain stable operation of production equipment without short circuits, overheating, and wear of protective units.

Household appliances:

Uninterruptible power supply for computers, TVs, refrigerators, air conditioners, security systems..

  • To provide uninterrupted power supply for computers, TVs, refrigerators, air conditioners, security systems, and other household appliances during power outages.

Pure sine wave UPS with external battery are used:

  • as uninterruptible power supplies for gas PHASE-INDEPENDENT or solid-fuel PHASE-INDEPENDENT heating boilers;
  • UPS for emergency lighting;
  • to provide backup power for server stations and telecommunication equipment;
  • pure sine wave UPS for circulation pumps;
  • as a voltage stabilizer with a backup power source for high-performance and high-speed computers.

The 24V LPE-B-PSW-2300VA+ (1600W) 1-35A pure sine wave UPS allows connecting batteries with a capacity of 20 Ah for low-current loads such as a single 45-60 W circulation pump. You can also connect batteries with a capacity of 150 Ah or more (depending on the model) to increase backup runtime.

The UPS must be used only together with a rechargeable battery (battery not included), which must match the technical specifications of the device.

Types of external rechargeable batteries that can be connected to the UPS:

Types of external rechargeable batteries that can be connected to the UPS

Wiring diagrams for the 24V LPE-B-PSW-2300VA+ (1600W) 1-35A pure sine wave UPS

Connection scheme via the 230V mains will allow you to quickly connect only the necessary devices.

Wiring diagrams for pure sine wave UPS via socket

3 steps to connect the UPS via a socket:

  • Connect the battery observing polarity;
  • Connect the UPS to the mains by inserting the UPS plug into a 230V socket;
  • Wait for self-diagnostics to complete and the UPS to turn on.

Attention! The UPS will turn on automatically! Do not press the power button and do not interrupt self-diagnostics!

Choosing a UPS for heating boilers and emergency lighting systems

Before purchasing a pure (clean) sine wave UPS, you must consider the following technical specifications:

  • Total power consumption of electrical appliances to be connected to the UPS. This parameter can be found in the technical documentation of each piece of equipment.

  • Inrush power (surge power) - the amount of electricity consumed by the device when turned on. To connect a UPS to equipment with high inrush currents, you must choose a more powerful uninterruptible power supply model.

  • Required pump backup runtime from the battery. Determined by individual consumer needs. For long-term autonomous operation, choose a pure sine wave UPS to which an external battery can be connected.

ATTENTION! This UPS lacks a "pass-through neutral". Please make sure your heating boiler does not require an uninterruptible power supply with a "pass-through neutral".

To ensure your uninterruptible power supply with an external battery works long and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid errors during device care and maintenance.

Specifications

Technical Specifications

Type
line-interactive with pure sine wave
Series
LPE
Power, VA/W
2300/1600
Nominal Battery Voltage, V
24
Mains Charging Current, A
1-35
Number of Outputs
2
Installation
floor-standing
Number of Phases
1
Output Voltage Waveform
pure sine wave
Input Voltage Range, V
150V -282V at set output voltage 220V, 156V -294V at set output voltage 230V, 163V -307V at set output
Output Voltage, V
220/230/240±5%
Input Frequency Range, Hz
40/70
Output Frequency Range, Hz
50/60
Efficiency, %
95
Mains Connection Type
Schuko plug
Load Connection Type to UPS
Schuko socket
Battery Connection Type to UPS
terminals
AVR Voltage Stabilization Function
yes
Protection
against overload, overvoltage, short circuit, overcharging, overheating, low battery charge
Indication Type
LCD
Operating Temperature, °C
0 ~ +40
Enclosure Material
metal
Warranty, months
24
Color
black
Length, mm
295
Width, mm
285
Height, mm
165
Weight, kg
16.74

General Information

Model
Pure Sine Wave UPS 24V LPE-B-PSW-2300VA+ (1600W) 1-35A
SKU
19409
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog