1-50V voltage sensor cable for Dragon Link V3 telemetry
DragonLabs
260 ₴
1 / 8SKU ARMADA-BEC12S5A-PRO
Onboard drone power regulator – ARMADA BEC 12S (6-55V), UBEC 5V/8V/12V 5A.
ARMADA BEC 12S is a reliable Ukrainian-made voltage regulator designed to provide stable power to onboard electronics: flight controllers, receivers, video transmitters, cameras, servos, navigation sensors, telemetry, and other UAV components. The BEC delivers clean and stable output voltage to power drone electronics across a wide input range of 6 to 55V. Onboard regulators by Armada are installed on both compact FPV drones and heavy-duty quadcopters, fixed-wing models, and UGVs. The ARMADA BEC is adapted to Ukrainian production, logistics, and service conditions for UAV manufacturing.
The Ukrainian-made ARMADA BEC 12S serves as an excellent replacement in all UAV manufacturing projects where Chinese power regulators such as the Matek BEC 12S Pro or similar were previously used. Our BEC features an even lower minimum input voltage of 6V, expanding its compatibility with low-voltage battery packs. In Ukrainian UAV projects, imported onboard regulators with a maximum current of up to 5A can be replaced with the ARMADA BEC 12S without altering the drone's circuitry.
The BEC for drones by Armada features high-quality componentry and well-engineered board routing. This voltage regulator is built around the LM5116 step-down controller paired with two high-efficiency MOSFETs, ensuring reliable operation across the entire rated power range. This is essential for the efficient and stable performance of the onboard regulator even in powerful UAVs.
The characteristics of the onboard regulator meet the following requirements:
• Input voltage range of 6–55V (2S–12S Li-Po).
The input supply voltage range of 6V – 55V corresponds to battery configurations from 2S to 12S. Thanks to the wide input voltage range, the regulator is compatible with various battery packs — from small (2S) to large (10S–12S). The BEC allows powering all drone electronics from a single battery without the need for additional power sources. Thus, the BEC can be used in both lightweight racing FPV quadcopters and large industrial UAVs.
Output — 5V / 8V / 12V, selectable via presets.
Switching UBEC - step-down DC-DC voltage stabilizer. The UBEC output voltage has three preset options: 5V, 8V, and 12V, allowing the BEC to power various functional blocks of the drone. The voltage regulator converts high battery voltage (6–55V) into stable 5V, 8V, or 12V, providing clean power without ripple. The ARMADA BEC maintains a constant voltage level even when the battery voltage drops under load or discharge. This is critical for the stable operation of controllers to prevent freezes or signal loss. The selectable output voltage provides flexibility: you can power both a 5V controller and receiver, or 8–12V servos and cameras.
• Compact physical dimensions ensure compatibility with most FPV quadcopters and airplanes where mounting space is limited.
• 5A continuous: The ARMADA BEC can reliably and continuously power servos, flight controllers, video transmitters, cameras, and navigation simultaneously — even under high current draws. Five amperes of continuous current guarantee a power reserve for all onboard electronics. Continuous operation means reliable performance throughout the entire flight. The drone system will not shut down or overheat, and control will not be lost at a critical moment. This is a very heavy load for a step-down stabilizer of this size.
The switching circuit based on the LM5116 and two MOSFETs maintains a stable output voltage even under high currents and effectively dissipates heat at high loads, achieving high efficiency, stability under load, and minimal heating. High efficiency means lower heat losses, which is especially important in small FPV quadcopters.
• Enable control: dedicated control pad compatible with PinIO — allows turning power on/off via the flight controller. The regulator board includes a pad for enabling/disabling the output voltage, allowing control over the regulator's operation using PinIO functionality.
• LED indication: power status LED. A status LED is present on the board to indicate regulator operation.
• Electronic protections: overload, short-circuit, and thermal protection. The BEC filters ripple and protects the drone's onboard modules from overheating.
Advantages of ARMADA BEC 12S:
High efficiency and operational stability across a wide voltage range.
Reliable — high-quality componentry and well-engineered board routing.
Made in Ukraine — prompt logistics, warranty, official documentation, VAT invoice support, and customer service.
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.