Eldom Favourite 72280 Electric Water Heater 150 L
Eldom
8,660 ₴
1 / 5SKU 000004219
The CUBE electric storage water heater model is designed for vertical installation only. The water heater's design ensures tank water filling and heating in automatic mode.
The internal tank of the water heater is made of high-quality steel, withstanding significant mechanical stress. For corrosion protection, the steel is coated with a layer of titanium enamel featuring an increased titanium and chromium content, guaranteeing complete protection even against the hardest tap water. The internal tank features a special bio-glass-porcelain coating executed via Surely technology, reliably protecting the inner surface from corrosion.
Dense, eco-friendly polyurethane foam thermal insulation (density 36 kg/m3), CFC-free, gives the product thermos-like properties and ensures maximum operating efficiency. The adjustable double-protection thermostat strictly maintains the set hot water temperature and automatically blocks the heater in case of overheating. A safety cover protects the heating assembly from accidental damage; all covers are made of modern high-strength polymer materials. This allows easy removal of dust and moisture from the surface and prevents the likelihood of electric shock. The safety valve prevents water leakage into the pipeline and serves to relieve excess water pressure in the tank.
The replaceable magnesium anode provides internal protection against electrochemical corrosion. The entire electrical unit, including the heating element (resistance heater), thermostat, and replaceable magnesium anode, is assembled on a steel flange secured to the tank with heavy-duty bolts. Water heating in models marked with DT (dry heating element) is carried out by two AISI 316 stainless steel DRY heating elements placed in a special protective flask and not contacting water.
Thanks to the protective flask, the heating elements are not subject to scale formation, require no cleaning, last significantly longer on average, and there is no need to drain water from the tank when replacing a heating element. Two independent AISI 316 stainless steel heating elements are installed on a single flange.
Water in the water heater is heated to the set temperature. Upon opening the hot water tap, cold water begins to enter the water heater from the bottom through the cold water supply tube. The cold water displaces the previously heated water through the hot water outlet tube coming from the upper part of the appliance. Thus, hot water is delivered to the consumer, and the water heater fills with cold water from the bottom. The heating element begins heating the water to the set temperature again. The storage tank design prevents mixing of cold and heated water layers. This device significantly increases the hot water utilization coefficient and completely eliminates sharp temperature fluctuations.
Heating temperature (from 30 to 75 °C) with 1 °C intervals. Set the required temperature. Adjust the water heater knob to set the internal tank heating temperature. The maximum water temperature is set to 75 °C. The temperature control knob OFF means power off, HIGH means high temperature. Turn the knob clockwise to increase the temperature setting. Upon reaching the maximum temperature value, the knob turns no further. Gradually turn the knob counterclockwise to decrease the temperature setting. Upon reaching the minimum temperature value, if you continue turning the water temperature knob, the water heater will stop heating. When turning on the water heater, the Power indicator lights up. The control panel features a display showing the current water temperature.
After adjusting the water heating temperature, you need to select the heating element operation mode:
- eco mode (0.8 kW with dry heating element)
- standard mode (1.3 kW with dry heating element)
- both buttons pressed: accelerated mode (2.0 kW). The water heater automatically uses the selected power to heat water in the tank.
The boiler is equipped with an RCD (Residual Current Device) for human protection against potential electric shock during electric water heater use.
The residual current device measures input and output current; if they are equal, everything is fine and the appliance connected to the RCD operates, but as soon as current begins leaking to the enclosure, the RCD instantly disconnects the appliance via a relay. To prevent electric shock, RCDs are installed; the protection will disconnect 220V power faster than a person can feel the shock.
Warranty: 12 months official manufacturer warranty on electrical components + 36 months on the tank.
Package contents:
Water heater - 1 pc.
Safety valve - 1 pc.
Operation manual - 1 pc.
Packaging - 1 pc.
Mounting anchors - 2 pcs.
Drain tube - 1 pc.
RCD
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.