DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
OCEAN CUBE RZF50D-4 Water Heater1 / 5

OCEAN CUBE RZF50D-4 Water Heater

SKU 000004218

Description

The CUBE electric water heater model is designed for vertical installation only. The design of the water heater ensures tank filling with water and its heating in automatic mode.

The inner tank of the water heater is made of high-quality steel, withstanding significant mechanical stress. For corrosion protection, the steel is coated with a layer of titanium enamel with an increased content of titanium and chromium, guaranteeing full protection even against the hardest tap water. The inner tank has a special bio-glass-porcelain coating made using Surely technology, which reliably protects the inner surface from corrosion.

Dense, environmentally friendly polyurethane foam thermal insulation (density 36 kg/m3), free of freon, gives the product thermos properties and ensures the maximum possible operational efficiency. An adjustable double-protection thermostat strictly maintains the set hot water temperature and automatically blocks the heater in case of overheating. A safety cover protects the heating assembly from accidental damage; all covers are made of modern high-strength polymer materials. This allows easy removal of dust and moisture from the surface and prevents the possibility of electric shock. The safety valve prevents water leakage into the pipeline and serves to relieve excess water pressure in the tank.

Thanks to the protective flask, heating elements are not subject to scale, do not require cleaning, and last significantly longer on average; there is also no need to drain water from the tank when replacing a heating element. Two independent stainless steel AISI 316 heating elements are installed on a single flange.

Heating element power is 2.0 (0.7+1.3) kW with a wet heating element. Both heating elements can operate either sequentially or simultaneously. Single mode allows for economical, albeit longer water heating, while two operating heating elements heat water quickly. All models are equipped with a power regulator that allows selecting one of three heating modes, as well as an economical heating mode.

Water in the water heater is heated to the set temperature. When opening the hot water tap to the water heater from below, cold water begins to enter through the cold water supply tube. Cold water displaces the previously heated water through the hot water extraction tube coming from the upper part of the apparatus. Thus, hot water goes to the consumer, and from below the water heater is filled with cold water. The heating element begins to heat the water to the set temperature again. The design of the water-retaining tank prevents mixing of cold and heated water layers. Thanks to this device, the hot water utilization coefficient is significantly increased and sharp temperature drops are completely eliminated.

Heating temperature (from 30 to 75 °C) with an interval of 1 °C. Set the required temperature. Adjust the water heater knob to set the inner tank heating temperature. The maximum water temperature is set to 75 °C. The OFF temperature adjustment knob means power off, HIGH means high temperature. Turn the knob clockwise to increase the temperature setting. Upon reaching the maximum temperature value, the knob no longer turns. Gradually turn the knob counterclockwise to decrease the temperature setting. Upon reaching the minimum temperature value, if you continue to turn the water temperature knob, the water heater will stop heating. When turning on the water heater, the Power indicator lights up. A display is located on the control panel showing the current water temperature.

After setting the water heating temperature, you need to select the operating mode of the heating elements:

- economical mode (0.7 kW with wet heating element)

- standard mode (1.2 kW with wet heating element)

- both buttons pressed activates accelerated mode (2.0 kW). The water heater automatically uses the selected power to heat water in the tank.

The boiler is equipped with an RCD (residual current device) to protect a person from possible electric shock during the use of the electric water heater.

The residual current device measures input and output current; if they are equal, everything is in order and the appliance connected to the RCD operates, but as soon as current begins to leak to the casing, the RCD instantly disconnects the appliance using a relay. To prevent electric shock, an RCD is installed; the protection will disconnect 220 V power faster than a person can feel a shock.

Warranty: 12 months official manufacturer warranty on electrical components + 36 months on the tank

Package contents:

Water heater - 1 pc.
Safety valve - 1 pc.
User manual - 1 pc.
Packaging - 1 pc.
Mounting anchors - 2 pcs.
Drain tube - 1 pc.
RCD

Specifications

Technical Specifications

CAPACITY, L
50
HEATING ELEMENT TYPE
Wet
HEATING ELEMENT POWER
2000 W
NUMBER OF HEATING ELEMENTS, PCS
2
BOILER SHAPE
Rectangular
CONTROL
Electronic
MOUNTING
Wall-mounted
TANK WARRANTY
36 mo.
ELECTRICAL PART WARRANTY
12 mo.
INSTALLATION
Vertical
MANUFACTURING COUNTRY
China
Weight (kg)
25
Packaged weight (kg)
27
Dimensions (HxWxD)
76.6 x 36.5 x 40.4 cm
Packaged dimensions (HxWxD)
79.7 x 39.5 x 43.4 cm
Additional characteristics
ET+WT (wet heating element) 50L

General Information

Model
OCEAN CUBE RZF50D-4 Water Heater
SKU
000004218
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog