Eldom Favourite 72280 Electric Water Heater 150 L
Eldom
8,660 ₴
1 / 5SKU 000004216
The CUBE electric water heater model is designed for vertical installation only. The water heater design ensures tank filling with water and its heating in automatic mode.
The inner tank of the water heater is made of high-quality steel, capable of withstanding significant mechanical stress. For corrosion protection, the steel is coated with a layer of titanium enamel with an increased content of titanium and chromium, guaranteeing complete protection even against the hardest tap water. The inner tank features a special bio-glass-porcelain coating applied using Surely technology, which reliably protects the inner surface from corrosion.
Dense, environmentally friendly polyurethane foam insulation (density 36 kg/cm3), free of freon, gives the product thermos-like properties and ensures the highest possible operational efficiency. The dual-protection adjustable thermostat strictly maintains the set hot water temperature and automatically blocks the heater in case of overheating. The protective cover shields the heating assembly from accidental damage; all covers are made of modern high-strength polymer materials. This allows for easy removal of dust and moisture from the surface and prevents the likelihood of electric shock. The safety valve prevents water leakage back into the pipeline and serves to relieve excess water pressure in the tank.
Thanks to the protective flask, the heating elements are not susceptible to scale, do not require cleaning, and last significantly longer on average. There is also no need to drain water from the tank when replacing a heating element. Two independent stainless steel AISI 316 heating elements are installed on a single flange.
Heating element power is 2.0 (0.7+1.3) kW with a wet heating element. Both heating elements can operate either sequentially or simultaneously. The single mode allows for economical, albeit longer, water heating, while two operating heating elements heat water quickly. All models are equipped with a power regulator that allows selecting one of three heating modes, as well as an economy heating mode.
Water in the water heater is heated to the set temperature. When opening the hot water faucet, cold water begins to enter the water heater from below through the cold water supply tube. Cold water displaces the previously heated water through the hot water outlet tube coming from the upper part of the apparatus. Thus, hot water flows to the consumer, and from below the water heater fills with cold water. The heating element starts heating the water to the set temperature again. The design of the water-retaining tank prevents mixing of cold and heated water layers. Due to this design, the hot water utilization coefficient is significantly increased, and sharp temperature drops are completely eliminated.
Heating temperature (from 30 to 75 °C) with an interval of 1 °C. Set the required temperature. Adjust the water heater knob to set the inner tank heating temperature. The maximum water temperature is set to 75 °C. The temperature control knob OFF means power off, HIGH means high temperature. Turn the knob clockwise to increase the temperature setting. Upon reaching the maximum temperature value, the knob no longer turns. Gradually turn the knob counterclockwise to decrease the temperature setting. Upon reaching the minimum temperature value, if you continue turning the water temperature knob, the water heater will stop heating. When the water heater is turned on, the Power indicator lights up. A display is located on the control panel showing the current water temperature.
After setting the water heating temperature, you need to select the heating element operating mode:
- economy mode (0.7 kW with wet heating element)
- standard mode (1.2 kW with wet heating element)
- both buttons pressed activates accelerated mode (2.0 kW). The water heater automatically uses the selected power to heat water in the tank.
The water heater is equipped with an RCD (Residual Current Device) to protect a person from potential electric shock while using the electric water heater.
The residual current device measures the input and output current; if they are equal, everything is fine and the appliance connected to the RCD operates, but as soon as current begins to leak to the casing, the RCD instantly disconnects the appliance using a relay. To prevent electric shock, an RCD is installed; the protection will cut off the 220V power supply faster than a person can feel the shock.
Warranty: 12 months official manufacturer warranty on electrical components + 36 months on the tank
Package contents:
Water heater - 1 pc.
Safety valve - 1 pc.
User manual - 1 pc.
Packaging - 1 pc.
Mounting anchors - 2 pcs.
Drain tube - 1 pc.
RCD
Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.
Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.