DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Non-pressurized thermosiphon solar collector ALTEK SD-T2L-30
38 503 ₴
In Stock
1

Non-pressurized thermosiphon solar collector ALTEK SD-T2L-30

SKU 105934

Description

ALTEK SP-CL solar collectors are designed as a standalone installation that simultaneously functions as a solar receiver and storage tank for water heating. This solar collector belongs to non-pressurized thermosiphon systems with a pressurized heat exchanger.

In SP-CL solar water heaters, domestic hot water (DHW) is heated in flow-through mode by passing through a built-in spiral heat exchanger located inside the storage tank. The heat-transfer water is located directly in the storage tank and can be delivered to the consumer passively if necessary, i.e., via gravitational forces. The pressure of the "passive" water depends on the elevation difference between the solar water heater and the draw-off point, while the water pressure at the outlet of the heat exchanger depends on the water pressure at its inlet from your cold water supply system.

Vacuum tubes are installed in the lower part of the water tank. When the water in the tubes heats up, its density decreases and warm water rises to the upper part of the tank, while cold water from the tank descends downward into the vacuum tube. This ensures the circulation and heat exchange of water in the tank:

The outer layer of the solar water heater is made of high-quality low-carbon steel with a titanium content. This ensures high corrosion resistance and a long service life. Between the outer and inner layers of the tank is a modern eco-friendly material—polyurethane foam—which possesses superior heat-retention characteristics. After installation and commissioning, the solar system will operate to provide the consumer with hot water meeting domestic hot water requirements.

For small commercial enterprises such as restaurants, car washes, homesteads with central hot water supply systems, saunas with swimming pools, or workshops, hot water supply can be provided by systems with multiple water heaters.

In multi-unit systems, solar receivers are integrated into the system using parallel-connected pipes, ensuring proper water drainage for all tanks.

Altek ™ solar water heaters do not require complex maintenance but are intended for seasonal use. Such systems operate under conditions of positive outdoor air temperatures. The recommended ambient operating temperature is from 0°C to +50°C.

ADVANTAGES

  • high resistance to weather phenomena such as wind and hail, as well as extremely high and low temperatures under specified conditions;
  • high-quality inner tank made of food-grade stainless steel meets all hygienic requirements for water quality;
  • increased corrosion resistance of the solar system's inner tank due to the installation of a magnesium anode;
  • outer tank and product frame subjected to anti-corrosion treatment;
  • long-term retention of high water temperature is achieved due to the large thickness of the polyurethane foam layer, resulting in a significant reduction in heat loss. High water temperature can be maintained for up to 72 hours, and even after 100 hours of storage, the water in the tank will still be warm;
  • if necessary, the water heater can be equipped with an additional electric heater (heating element) with a temperature controller;
  • vacuum tube seals made of organosilicon (silicone) rubber are non-toxic, odorless, contribute to maintaining cleanliness and high water temperature, and feature a long service life;
  • delivery set is fully ready for installation;
  • simple design ensuring no need for complex assembly and installation operations;
  • no need to install additional pumps and other expensive equipment;
  • capable of operating without electricity;
  • long service life, suitable for operation for more than 15 years.

SCOPE OF SUPPLY

1. Water tank (storage)

2. Supporting frame structure

3. Assembly kit (bolts, nuts)

4. Vacuum heat pipe kit

5. 5 L filling tank

6. Installation and operation manual

7. Cardboard packaging

SP-CL SYSTEM OVERALL DIMENSIONS

Model

SP-CL-15

SP-CL-20

SP-CL-24

SP-CL-30

A, mm.

1310

1685

1985

2435

B, mm.

1110

1485

1785

2235

C, mm.

-

-

892.5

1255

HEAT EXCHANGER CHARACTERISTICS

• Material: copper pipe Ø12x0.6 mm.

• Length and area of heat exchanger:

  • SP-CL-15 - 22 m, 0.83 m2
  • SP-CL-20 - 25 m, 1.13 m2
  • SP-CL-24 - 28 m, 1.32 m2
  • SP-CL-30 - 28 m, 1.32 m2

• Hot water flow rate - 8-11 L/min

• Maximum pressure - 10 bar

• Connection size - ½" Male Thread

TECHNICAL SPECIFICATIONS

Model

SP-CL-15

SP-CL-20

SP-CL-24

SP-CL-30

Number of vacuum tubes

15 pcs

20 pcs

24 pcs

30 pcs

System capacity

158 L

209 L

250 L

311 L

Vacuum tube characteristics

Borosilicate glass 3.3 (T-0.91); Multi-layer (12-layer) absorbing coating, type SS-AL-Nx/Cu; Ø58x1800 mm

Outer tank

Ø470 mm, painted steel, thickness 0.38 mm

Inner tank

Ø360 mm, stainless steel SUS316L,

thickness 0.41 mm

Thermal insulation material

polyurethane foam, thickness 55 mm

Aperture area

1.41 m2

1.88 m2

2.26 m2

2.82 m2

Absorber area

1.21 m2

1.61 m2

1.94 m2

2.42 m2

Water inlet / outlet pipe connection

1/2" Male Thread

Electric heater mounting size

1 1/4" Female Thread

Working pressure in tank

0.05 MPa

Collector installation angle

450

Average daily heating

9.1 MJ/m3

Heat loss coefficient

12 W/(m3K)

High temperature retention in tank

48-72 hours

Water temperature drop in tank (at outdoor T>100C)

40C - 80C per day

Weight of assembled and water-filled system

224 kg

294 kg

351 kg

433 kg

Specifications

Technical Specifications

Collector type
Tubular
Operation seasonality
Summer period
Number of tubes
30
Heating volume, L
300

General Information

Model
Non-pressurized thermosiphon solar collector ALTEK SD-T2L-30
SKU
105934
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog