DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Non-pressurized thermosiphon solar collector ALTEK SD-T2L-24
32 747 ₴
In Stock
1

Non-pressurized thermosiphon solar collector ALTEK SD-T2L-24

SKU 105933

Description

ALTEK SP-CL solar collectors are designed as an autonomous unit that simultaneously performs the functions of a solar receiver and a storage tank for water heating. This solar collector belongs to non-pressurized thermosiphon-type systems with a pressurized heat exchanger.

In SP-CL solar water heaters, domestic hot water (DHW) is heated in a flow-through mode by passing through a built-in spiral heat exchanger located inside the storage tank. The water from which heat is removed is located directly in the storage tank and, if necessary, can be supplied to the consumer passively, i.e., by gravitational forces. The pressure of the 'passive' water depends on the elevation difference between the solar water heater and the draw-off point, while the water pressure at the outlet of the heat exchanger depends on the water pressure at its inlet from your cold water supply system.

Vacuum tubes are installed in the lower part of the water tank. When the water in the tubes is heated, its density decreases and warm water rises to the upper part of the tank, while cold water from the tank drops down into the vacuum tube. This ensures circulation and heat exchange of water in the tank:

The outer layer of the solar water heater is made of high-quality low-carbon steel containing titanium. This provides high corrosion resistance and a long service life. Between the outer and inner layers of the tank is a modern eco-friendly material — polyurethane foam, which possesses the best heat conservation characteristics. After installation and commissioning, the solar system will operate, providing the consumer with hot water that meets domestic hot water supply requirements.

For small commercial enterprises such as restaurants, car washes, homesteads with central hot water systems, baths with swimming pools, or workshops, hot water supply can be provided by systems with multiple water heaters.

In multi-unit systems, solar receivers are integrated into the system using parallel-connected pipes, ensuring proper water drainage for all tanks.

Altek™ solar water heaters do not require complex maintenance but are intended for seasonal use. Such systems are operated under conditions of positive outdoor air temperatures. The recommended ambient operating temperature is from 0°C to +50°C.

ADVANTAGES

  • high resistance to weather phenomena such as wind and hail, as well as to extremely high and low temperatures under specified conditions;
  • high-quality inner tank made of food-grade stainless steel meets all hygienic water quality requirements;
  • increased corrosion resistance of the solar system's inner tank due to the installation of a magnesium anode;
  • the outer tank and product frame have undergone anti-corrosion treatment;
  • long-term conservation of high water temperature is achieved due to the large thickness of the polyurethane foam layer, resulting in a significant reduction in heat loss. High water temperature can be maintained for up to 72 hours, and even after 100 hours of storage, the water in the tank will still be warm;
  • if necessary, the water heater can be equipped with an auxiliary electric heater (heating element/TEN) with a thermostat;
  • the vacuum tube seal is made of silicone rubber, non-toxic and odorless, helps preserve cleanliness and maintain high water temperature, and is characterized by a long operational resource;
  • delivery kit is fully ready for installation;
  • simple design ensuring no need for complex assembly and installation operations;
  • no need to install additional pumps or other expensive equipment;
  • operation without electricity is possible;
  • long service life, suitable for operation for more than 15 years.

PACKAGE CONTENTS

1. Water tank (storage unit)

2. Supporting frame structure

3. Assembly kit (bolts, nuts)

4. Set of vacuum heat pipes

5. Filling tank 5 L.

6. Installation and operation manual

7. Cardboard packaging

OVERALL DIMENSIONS OF SP-CL SYSTEMS

ModelSP-CL-15SP-CL-20SP-CL-24SP-CL-30
A, mm1310168519852435
B, mm1110148517852235
C, mm--892.51255

HEAT EXCHANGER CHARACTERISTICS

• Material: copper pipe Ø12x0.6 mm

• Length and area of the heat exchanger:

  • SP-CL-15 - 22 m, 0.83 m2
  • SP-CL-20 - 25 m, 1.13 m2
  • SP-CL-24 - 28 m, 1.32 m2
  • SP-CL-30 - 28 m, 1.32 m2

• Hot water flow rate - 8-11 L/min

• Maximum pressure - 10 bar

• Connection size - ½" Male Thread (M)

TECHNICAL SPECIFICATIONS

ModelSP-CL-15SP-CL-20SP-CL-24SP-CL-30
Number of vacuum tubes15 pcs20 pcs24 pcs30 pcs
System volume158 L209 L250 L311 L
Vacuum tube characteristicsBorosilicate glass 3.3 (T-0.91); Multi-layer (12 layers) absorbing coating, type SS-AL-Nx/Cu; Ø58x1800 mm
Outer tankØ470 mm, painted steel, thickness 0.38 mm
Inner tankØ360 mm, stainless steel SUS316L, thickness 0.41 mm
Thermal insulation materialpolyurethane foam, thickness 55 mm
Aperture area1.41 m21.88 m22.26 m22.82 m2
Absorber area1.21 m21.61 m21.94 m22.42 m2
Water inlet/outlet pipeline connection1/2" Male Thread (M)
Electric heater mounting size1 1/4" Female Thread (F)
Working pressure in the tank0.05 MPa
Collector installation angle450
Average daily heating9.1 MJ/m3
Heat loss coefficient12 W/(m3K)
High temperature preservation in the tank48-72 hours
Water temperature loss in the tank (at external T > 100C)40C - 80C per day
Weight of assembled and water-filled system224 kg294 kg351 kg433 kg

Specifications

Technical Specifications

Collector type
Tubular
Operation seasonality
Summer period
Number of tubes
24
Heating volume, L
240

General Information

Model
Non-pressurized thermosiphon solar collector ALTEK SD-T2L-24
SKU
105933
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog