DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Multi-gel Battery LP-MG 12V - 7 Ah Silver1 / 2

Multi-gel Battery LP-MG 12V - 7 Ah Silver

SKU 6900023270012

Description

AGM Multi-gel Battery

External universal SLA battery manufactured using AGM multi-gel technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal AGM (absorbent glass mat) external batteries involves an absorbent fiberglass pad inside the battery. Batteries of this type cope excellently with increased loads.

The main feature of SILVER batteries is the application of silver-alloying technology. The plates inside the battery are protected from corrosion processes; moreover, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER rechargeable batteries, compared to standard multi-gel batteries, feature an increased service life and a 15% higher cold-cranking amps capability.

Advantages of the Multi-gel AGM Battery:

  • Charge/discharge cycle lifespan for AGM (multi-gel) batteries is 1000* cycles (generally 6-7 years, depending on operating conditions).
  • The battery can be installed in residential areas. The absence of free liquid electrolyte between the plates and the complete sealing of the housing prevent acid leakage and guarantee no harmful fumes.
  • In practical use, these batteries show stable performance under low (-20°C) and high (+50°C) ambient temperature conditions.
  • During operation, the AGM (multi-gel) lead-acid battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against over-discharge and overcharging.

Production Features of Multi-gel AGM Batteries

Multi-gel batteries are manufactured using advanced AGM technology with thickened plates featuring high anti-corrosion properties.

Porosity-insulating thin fiberglass pads are placed inside the battery. The separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is dosed so that fine pores are filled with acid, while larger pores ensure gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not manage to evaporate outside the sealed housing prior to condensation.

Applications: What is a Multi-gel AGM Battery Used For?

The universal external rechargeable battery is used in:

  • Telecommunications and other communication systems, including as an external backup battery for powering mobile phones, walkie-talkies, etc.
  • Video surveillance, security, fire alarm, and other signaling equipment systems.
  • Uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • Alternative energy storage systems (batteries for solar panels).
  • As a battery for emergency or LED lighting fixtures.
  • As batteries for uninterruptible power supply units and UPS systems.

Which Batteries are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery Should be Purchased for a UPS?

The choice of battery depends on the power rating of the loads to be connected, as well as the required backup operating time of the electrical equipment from the battery.

The external AGM (multi-gel) battery for a UPS must have an adequate capacity reserve, a wide operating temperature range, and a long service life.

Before deciding which battery is best to purchase for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of the electrical equipment.

Multi-gel AGM batteries are in high demand among consumers seeking to buy an affordable and universal backup battery for heating boilers, emergency lighting systems, or autonomous water supply.

How to Avoid Capacity Loss in a Rechargeable Battery During Frequent Power Outages?

Two Important Rules for Maintaining AGM, GEL, and MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (keep this in mind when calculating battery capacity).
  2. After discharging, the battery must be fully recharged with a current equal to 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used, then:

  • all batteries must have identical capacity,
  • be of the same type (AGM, GEL, or MG),
  • have identical voltage, an identical number of charge/discharge cycles,
  • and belong to the same batch from the same brand.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by warranty. You can obtain more detailed information from our article.

Specifications

Technical Specifications

Nominal capacity, Ah
7
Nominal voltage, V
12
Maximum charge current, A
12
Type
AGM multi-gel
Internal resistance, mOm
26
Charging voltage (standby mode), V
13,5-13,8
Charging voltage (cyclic mode), V
14,7-15,0
Short-circuit current, A
105
Nominal charge current, A
0,7
Cold cranking amps, A
35
Terminal type
T2
Number of cycles
1000
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-20 ~ +50
Length, mm
150
Width, mm
65
Height, mm
95
Height with terminals, mm
100
Warranty, months
24
Weight, kg
2

General Information

Model
Multi-gel Battery LP-MG 12V - 7 Ah Silver
SKU
6900023270012
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog