DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

Multi-gel Battery LP-MG 12V - 200 Ah Silver

SKU 6900023180014

Description

AGM Multi-gel Battery

External universal rechargeable battery manufactured using AGM multi-gel technology – a completely sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology of universal external AGM (absorbent glass mat) batteries involves an absorbent fiberglass pad inside the battery. Batteries of this type cope exceptionally well with increased loads.

The main feature of SILVER batteries is the application of silver alloying technology. The plates located inside the battery are protected against corrosion processes; furthermore, the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER storage batteries, compared to standard multi-gel batteries, feature an increased service life and 15% higher starting current capacity.

Advantages of the Multi-gel AGM Battery:

  • The charge/discharge cycle lifespan of the AGM (multi-gel) battery is 1000* cycles (generally 6-7 years, depending on operating conditions).
  • The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and complete housing sealing prevent acid leakage and guarantee the absence of harmful vapors.
  • In practical use, these batteries demonstrate stable performance under low (-20°C) and high (+50°C) ambient temperature conditions.
  • During operation, the lead-acid AGM (multi-gel) battery is capable of withstanding prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during prolonged storage and reliable self-protection against over-discharge and overcharging.

Manufacturing Features of Multi-gel AGM Batteries

Multi-gel batteries are manufactured using advanced AGM technology with thickened plates featuring high anti-corrosion properties.

Porous insulating pads made of fine fiberglass are placed inside the battery. Separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is dosed so that small pores are filled with acid, while large pores ensure gas circulation.

The battery design features an improved gas recombination system – oxygen and hydrogen generated as a result of chemical processes do not have time to evaporate outside the sealed housing prior to condensation.

Application Areas: What is a Multi-gel AGM Battery Needed For?

The universal external rechargeable battery is used:

  • In telecommunications and other communication systems, including as an external battery for charging mobile phones, walkie-talkies, etc.
  • For equipping video surveillance, security, fire alarm, and other signaling systems.
  • In uninterruptible power supply systems for server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (solar battery storage).
  • As a battery for emergency or LED lighting fixtures.
  • As batteries for uninterruptible power supply units and UPS.

Which Batteries are Suitable for Emergency Lighting Systems in Ukraine, and Which Battery Should be Purchased for a UPS?

The choice of battery depends on the power requirements of the loads to be connected, as well as the required backup operating time of the electrical equipment powered by the battery.

The external AGM (multi-gel) battery for a UPS must have a sufficient reserve capacity, a wide operating temperature range, and a long service life.

Before deciding which battery is best to purchase for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of backup time required for the electrical equipment.

Multi-gel AGM batteries are in high demand among consumers seeking to buy an affordable and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two Important Rules for Maintaining AGM, GEL, and MG Batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity).
  2. After discharging, the battery must be fully charged with a current equal to 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used:

  • all batteries must have the exact same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage and identical charge/discharge cycle counts,
  • originate from the same manufacturing batch and the same brand.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by the warranty. More detailed information can be obtained from our article.

Specifications

Technical Specifications

Nominal capacity, Ah
200
Nominal voltage, V
12
Maximum charge current, A
40
Type
AGM multi-gel
Internal resistance, mOm
less than 3
Charge voltage (buffer mode), V
13.5-13.8
Charge voltage (cyclic mode), V
14.7-15.0
Short-circuit current, A
3600
Nominal charge current, A
20
Starting current, A
1200
Terminal type
T11 (for M8 bolt)
Number of cycles
1000
Enclosure material
Plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-20 ~ +50
Operating discharge temperature, °C
-40 ~ +50
Length, mm
522
Width, mm
238
Height, mm
218
Height with terminals, mm
221
Warranty, months
24
Weight, kg
58.5

General Information

Model
Multi-gel Battery LP-MG 12V - 200 Ah Silver
SKU
6900023180014
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog