DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
LogicPower LPE-B-PSW-800VA+ (500W) 10A Pure Sine Wave UPS 12V1 / 4

LogicPower LPE-B-PSW-800VA+ (500W) 10A Pure Sine Wave UPS 12V

SKU 30189

Description

Pure Sine Wave UPS LPE Series 500 W

Does not have a pass-through neutral, not designed for use with phase-dependent equipment.

Uninterruptible Power Supplies (UPS) with pure sine wave provide autonomous operation of electrical equipment from a battery in the event of power outages from the general grid.

Does not have a pass-through neutral, not designed for use with phase-dependent equipment.

Ensuring stable and uninterrupted power for your equipment

When using a pure sine wave UPS and an external battery, the equipment operates under optimal conditions, both during power outages and when operating from the general grid. Mode switching occurs automatically. Equipment connected to the UPS does not have time to turn off, as the switching speed is fractions of a second.

Protect expensive equipment from sudden power surges in the grid

In the event of a partial external power outage, rather than a complete one, or simply a drop in grid voltage level, using the built-in relay voltage stabilizer, the UPS step-by-step boosts the voltage, thereby protecting the connected load from low grid voltage. In case of overvoltage, the stabilizer reduces it. This is especially important for sensitive devices (computers, TVs, laboratory equipment, servers, network devices, etc.).

LPE Series Features:

  • Pure sine wave output.
  • Microprocessor control.
  • Suitable for all types of loads, such as resistive, inductive, rectified loads, and motors.
  • Charging current and voltage are set in the front panel menu.
  • Configurable no-load shutdown and energy-saving mode.
  • Protection against short circuit, overload, and low battery charge.
  • Intelligent long backup time.
  • Generator compatibility and inverter/generator configuration capability.

Where are 12V LPE-B-PSW-800VA+ (500W) 10A pure sine wave uninterruptible power supplies with an external battery used?

Medical Equipment:

  • To maintain power supply for ultrasound and other diagnostic devices during power outages and sudden grid voltage surges.

Audio and Video Equipment:

  • To reduce grid interference and noise. This improves the quality of audio and video recordings, and increases the efficiency of studio equipment.
  • To maintain uninterrupted operation of professional equipment such as mixers, amplifiers, and speakers.

Industrial Equipment:

  • To ensure the continuity of production processes by installing uninterruptible power supplies for controllers, automated systems, and other essential electrical equipment.
  • To maintain stable operation of production equipment without short circuits, overheating, and wear of protective units.

Household Appliances:

  • To provide uninterrupted power for computers, TVs, refrigerators, air conditioners, security systems, and other household appliances during power outages.

Pure sine wave UPS with external battery are used for:

  • as uninterruptible power supplies for gas PHASE-INDEPENDENT or solid fuel PHASE-INDEPENDENT heating boilers;
  • UPS for emergency lighting;
  • to provide backup power for server stations and telecommunication equipment;
  • pure sine wave UPS for circulation pumps;
  • as a voltage stabilizer with backup power source for powerful and high-speed computers.

The 12V LPE-B-PSW-800VA+ (500W) 10A pure sine wave UPS allows connecting a battery with a capacity of 20 Ah for low-current load such as a single 45-60 W circulation pump. You can also connect a battery with a capacity of 150 Ah or more (depending on the model) to increase autonomous backup time.

The UPS must be used only together with a rechargeable battery (battery not included), which must match the technical characteristics of the device.

Types of external rechargeable batteries that can be connected to the UPS:

Connection diagrams for 12V LPE-B-PSW-800VA+ (500W) 10A pure sine wave UPS

Connection scheme via the 230V grid will allow you to quickly connect only the necessary devices.

UPS pure sine wave connection diagrams via socket

3 steps to connect the UPS via socket:

  • Connect the battery observing polarity;
  • Connect the UPS to the grid by inserting the UPS plug into a 230V outlet;
  • Wait for self-diagnostics to finish and the UPS to turn on.

Attention! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnostics!

Selection of UPS for heating boilers and emergency lighting systems

Before buying a pure (clean) sine wave UPS, you need to consider the following technical characteristics:

  • Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each piece of equipment.

  • Inrush power - the amount of electricity consumed by the device when turned on. To connect the UPS to equipment with high starting currents, you need to choose a more powerful uninterruptible power supply model.

  • The required autonomous operating time of the pump from the battery. Determined by the individual needs of the consumer. For long-term autonomous operation, you should choose a pure sine wave UPS to which an external battery can be connected.

ATTENTION! This UPS lacks a "pass-through neutral". Please ensure that your heating boiler does not require a UPS with a "pass-through neutral".

To ensure your uninterruptible power supply with external battery works long and efficiently, follow the manufacturer's recommendations and instructions given in the operation manual. This will help avoid mistakes during device care and maintenance.

Specifications

Technical Specifications

Type
line-interactive with pure sine wave
Series
LPE
Power, VA/W
800/500
Battery Nominal Voltage, V
12
Grid Charging Current, A
10
Number of Outputs
2
Installation
floor-standing
Number of Phases
1
Output Voltage Waveform
pure sine wave
Input Voltage Range, V
150-282
Output Voltage, V
220/230/240±5%
Input Frequency Range, Hz
40/70
Output Frequency Range, Hz
50/60
Switching Time, ms
10
Efficiency, %
95
AVR Voltage Stabilization Function
yes
Protection
overload, overvoltage, short circuit, overcharging, overheating, low battery charge
Indication Type
LCD
Operating Temperature, °C
0 ~ +40
Enclosure Material
metal
Warranty, months
24
Color
black
Length, mm
281
Width, mm
132
Height, mm
176
Weight, kg
7.5
Power
500 W
Nominal Voltage
12 V
Nominal Current
10 A

General Information

Model
LogicPower LPE-B-PSW-800VA+ (500W) 10A Pure Sine Wave UPS 12V
SKU
30189
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog