DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Hybrid power station 50 kW (3-phase) with LiFePO4 51 kW (bifacial panels)1 / 3
1 444 714 ₴
Out of stock

Hybrid power station 50 kW (3-phase) with LiFePO4 51 kW (bifacial panels)

SKU 31221

Description

Mini solar power station for cottage and home with a capacity of 50kW is able to provide:

  • electrical equipment with autonomous electricity during daylight hours;

  • backup power for household and computer equipment in case of prolonged emergency power outages.

Why is a turn-key solar power station an effective replacement for fuel generators and other backup power sources?

  • The system does not require additional maintenance and does not need fuel, because the sun is an inexhaustible source of electricity;

  • SES equipment is connected to the apartment/house/office power grid. Switching to backup power mode does not require much time and effort;

  • Convenient system for monitoring system operation parameters;

  • Long-term operation of equipment without repairs and maintenance;

  • The opportunity to compensate for utility bills by consuming electricity from solar panels during daylight hours.

50kW solar power station - included:

  • DEYE for LP Hybrid three-phase inverter SUN-50K-SG01HP3-EU-BM3 - 1 pc.

  • High-voltage battery LP LiFePO4 Battery HVM 512V 100Ah (51200 Wh) BMS 125A metal - 1 pc.

  • Bifacial monocrystalline solar panel LP Longi Solar Half-Cell 580W (30 profile, TOPCon N-type Bi-facial) - 112 pcs.

  • Guide profile C Solar 41x41x1.5 mm - 336 m.

  • Profile connector C Solar 41x41x1.5 mm - 168 pcs.

  • Socket head cap screw with internal hex M8-16 - 236 pcs.

  • Flange serrated nut M8 - 236 pcs.

  • Inter-module clamp for mounting solar panels 35 mm P - 228 pcs.

  • End clamp for mounting solar panels 30 mm - 8 pcs.

  • Socket head cap screw with internal hex M8-35 - 236 pcs.

  • Mounting nut M8 with locking mechanism for mounting solar panels - 236 pcs.

  • Copper wire for battery connection 25 sq. mm - 100 cm (with terminals) red - 1 pc.

  • Copper wire for battery connection 25 sq. mm - 100 cm (with terminals) black - 1 pc.

  • Cable for solar power stations H1Z2Z2-K 1*4 30 m black (male/female) - 2 pcs.

  • Cable for solar power stations H1Z2Z2-K 1*4 30 m red (female/male) - 2 pcs.

  • Wooden box with lid for SES - 1 pc.

  • Double T-branch MC4 connector (pair) - 10 pcs.

  • 1690890 Disconnector ETI KVL 00 1P 160A (Terminals M8-M8) - 1 pc.

  • 4110084 Fuse ETI NH-00 Battery 160A 80V DC - 1 pc.

Solar power station: kit for Ukraine, how is the price formed?

The cost of a solar power station kit for a home depends on the type of rechargeable batteries.

Turn-key solar power stations with a capacity of 50kW of the «Premium» category contain an assembly of lithium iron phosphate rechargeable batteries (LiFePO4).

Alternative energy sources for home: advantages of using LiFePO4 batteries

  • Charge-discharge cycle resource in LiFePO4 – 7000. You will not have to think about battery replacement for at least 10 years.

  • It will take no more than 2 hours to fully charge the lithium iron phosphate battery. In addition, the battery has no «memory effect», meaning the battery can be charged at any time without waiting for a full discharge.

  • Capacity loss in lithium iron phosphate batteries is about 20% when stored for more than 10 years. In addition, this type of battery can remain in a discharged state for a long time without serious consequences for further operation.

Can you install a home SES yourself?

The solar photovoltaic modules included in the package are completely ready for self-installation. You do not need to install additional solar battery protection devices.

We recommend placing solar panels in areas with plenty of sunlight. Avoid shading from trees or buildings on the working area of the photovoltaic cells.

Solar panels can be mounted on the roof, ground, and on special welded structures. When installing photovoltaic modules, orient them towards the south.

Installation of supporting structures for solar panels is carried out using appropriate fasteners on aluminum frames. Mounting holes are provided on the back side of the frames.

Observe polarity when connecting all DC electrical connections. Carefully check the polarity of the solar panels and batteries before installation using a tester.

For safe operation of the solar power station, install grounding of the mounting structures, casing, and inverter.

Specifications

Technical Specifications

Type
solar power stations
Capacity, VA/W
50000
Panel type
monocrystalline
Number of panels, pcs
112
Battery type
LiFePO4
Nominal battery voltage, V
512
Battery capacity, Ah
100
Warranty, months
60
Capacity
50 kW

General Information

Model
Hybrid power station 50 kW (3-phase) with LiFePO4 51 kW (bifacial panels)
SKU
31221
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog