DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Gel battery LPM-GL 12V - 65 Ah1 / 5

Gel battery LPM-GL 12V - 65 Ah

SKU 6900038690010

Description

A gel (GEL) rechargeable battery is a completely sealed power source that does not require maintenance during storage and operation.

If we consider the gel battery, its advantages and disadvantages, we can conclude that a GEL-type battery significantly outperforms conventional lead-acid batteries in technical parameters and operational characteristics.

Advantages of the gel battery:

  • High charge/discharge cycle life (1200*) and, consequently, a longer service life (on average 7-8 years, depending on operating conditions).
  • The battery can be installed in residential premises. The viscous structure of the electrolyte and complete housing tightness eliminate acid leakage and guarantee the absence of harmful vapors.
  • In practical use, gel batteries show stable results when operating under low (-20°C) and high (+50°C) ambient temperatures. The wide operating temperature range allows GEL to be used as rechargeable batteries for a solar power station.
  • The manufacturing technology of gel batteries implies the ability of these batteries to withstand prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against over-discharge and overcharging.

Features of gel battery production

The main feature of gel batteries is the viscous (gel-like) structure of the electrolyte.

Filling the housing with electrolyte is carried out using a vacuum pump, which makes it possible to achieve its uniform concentration and high adhesion density to the plates.

Separators separating the lead electrodes of gel batteries are made of durable microporous material with aluminum additives. This design makes the separator resistant to vibrations and mechanical damage, as well as to the chemical effects of the aggressive acid environment inside the battery.

After being filled with electrolyte, the battery undergoes prolonged drying, during which microcracks form in the electrolyte structure. This technology makes it possible to reduce evaporation by a factor of several.

Rechargeable batteries manufactured using GEL technology, compared to AGM batteries with equivalent electrolyte volume, have:

  • larger capacity,
  • stably uniform reaction across all parts of the plate,
  • less plate corrosion,
  • high heat dissipation,
  • minimal electrolyte stratification indicators.

What is a gel battery used for?

Universal external gel-type batteries are used:

  • In telecommunications and other communication systems.
  • For equipping video surveillance systems, security, burglar, fire, and other alarms.
  • In uninterruptible power supply systems of server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • To provide independent or emergency lighting.
  • As batteries for uninterruptible power supply units and UPSs.

Which batteries are best for solar panels, and which battery to buy for a UPS?

Choosing a battery for an SES depends on the generation volumes of the solar power station, as well as on the required amount of electricity to meet consumption.

An AGM or gel battery for a solar panel must have a sufficient reserve capacity, a wide operating temperature range, and a long service life.

Before deciding which battery is better to buy for a UPS, carefully study the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of the electrical equipment.

Gel batteries are in high demand among consumers who purchase backup power kits for heating boilers, emergency lighting systems, or independent water supply.

How to avoid loss of battery capacity during frequent power outages?

Two important rules for caring for AGM, GEL, MG batteries:

  1. You should not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity)
  2. After discharge, the battery must be fully charged with a current of 1/10 of the capacity for 10 hours

IMPORTANT! If a group of several batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • be from the same batch of the same trademark.

Violation of these requirements causes premature failure of one or more batteries and is not a warranty case.

*Depending on operating conditions

Specifications

Technical Specifications

Nominal capacity, Ah
65
Nominal voltage, V
12
Type
gel
Internal resistance, mOm
7
Charging voltage (buffer mode), V
13.5-13.8
Charging voltage (cyclic mode), V
14.4-14.7
Terminal type
T6 (for M6 bolt)
Number of cycles
1200
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-10 ~ +50
Operating discharge temperature, °C
-15 ~ +50
Length, mm
345
Width, mm
167
Height, mm
175
Warranty, months
18
Weight, kg
19.175

General Information

Model
Gel battery LPM-GL 12V - 65 Ah
SKU
6900038690010
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog