DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Gel Battery LPM-GL 12V - 45 Ah1 / 5

Gel Battery LPM-GL 12V - 45 Ah

SKU 6900202690013

Description

A gel (GEL) rechargeable battery is a completely sealed power source that requires no maintenance during storage and operation.

Considering the gel battery, its advantages and disadvantages, we can conclude that GEL-type batteries significantly outperform conventional lead-acid batteries in terms of technical parameters and operational characteristics.

Advantages of a gel battery:

  • High charge/discharge cycle life (1200*) and, as a consequence, a longer service life (on average 7-8 years, depending on operating conditions).
  • The battery can be installed in residential areas. The viscous electrolyte structure and complete housing tightness eliminate acid leakage and guarantee the absence of harmful vapors.
  • In practical use, gel batteries show stable performance when operating in low (-20°C) and high (+50°C) ambient temperature conditions. The wide operating temperature range allows GEL to be used as battery banks for solar power stations.
  • The manufacturing technology of gel batteries implies the ability of these batteries to withstand prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against over-discharge and battery overcharge.

Features of Gel Battery Production

The main feature of gel batteries is the viscous (gel-like) structure of the electrolyte.

Filling the housing with electrolyte is carried out using a vacuum pump, which allows achieving uniform concentration and high adhesion density to the plates.

The separators dividing the lead electrodes of gel batteries are made of a durable microporous material with aluminum additives. This design makes the separator resistant to vibrations and mechanical damage, as well as to the chemical effects of the aggressive acid environment inside the battery.

After filling with electrolyte, the battery undergoes prolonged drying, during which microcracks form in the electrolyte structure. This technology allows reducing evaporated vapor percentage by several times.

Rechargeable batteries manufactured using GEL technology, compared to AGM batteries with equivalent electrolyte volume, feature:

  • higher capacity,
  • stably homogeneous reaction across all parts of the plate,
  • less plate corrosion,
  • high heat dissipation,
  • minimal electrolyte stratification rates.

What is a Gel Battery Used For?

Universal external gel-type batteries are used:

  • In telecommunications and other communication systems.
  • For equipping video surveillance, security, fire alarm, and other signaling systems.
  • In uninterruptible power supply systems of server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • To provide autonomous or emergency lighting.
  • As batteries for uninterruptible power supplies and UPS.

Which batteries are best for solar panels, and which battery should be purchased for an uninterruptible power supply?

Choosing a battery for a solar power station depends on the generation volumes of the solar plant, as well as the required amount of electricity to meet consumption needs.

An AGM or gel battery for a solar panel must have an adequate capacity margin, a wide operating temperature range, and a long service life.

Before deciding which battery is better to buy for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of electrical equipment.

Gel batteries are in high demand among consumers who purchase backup power kits for heating boilers, emergency lighting systems, or autonomous water supply.

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two important rules for maintaining AGM, GEL, and MG batteries:

  1. Do not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity).
  2. After discharge, the battery must be fully charged with a current of 1/10 of its capacity for 10 hours.

IMPORTANT! If a group of multiple batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • be from the same batch of the same trademark.

Violation of these requirements leads to premature failure of one or more batteries and is not covered by warranty.

Specifications

Technical Specifications

Nominal capacity, Ah
45
Nominal voltage, V
12
Type
gel
Internal resistance, mOm
7.2
Charge voltage (buffer mode), V
13.5-13.8
Charge voltage (cyclic mode), V
14.4-14.7
Short-circuit current, A
1350
Nominal charge current, A
4.5
Terminal type
T6 (for M6 bolt)
Number of cycles
1200
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charge temperature, °C
-10 ~ +50
Operating discharge temperature, °C
-15 ~ +50
Length, mm
197
Width, mm
167
Height, mm
174
Height with terminals, mm
230
Warranty, months
18
Weight, kg
12.915

General Information

Model
Gel Battery LPM-GL 12V - 45 Ah
SKU
6900202690013
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog