DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Gel Battery LPM-GL 12V - 40 Ah1 / 5

Gel Battery LPM-GL 12V - 40 Ah

SKU 6900041540012

Description

A gel (GEL) rechargeable battery is a completely sealed power source that requires no maintenance during storage and operation.

If we consider gel batteries, their advantages and disadvantages, we can conclude that GEL-type batteries significantly outperform conventional lead-acid batteries in technical and operational characteristics.

Advantages of Gel Battery:

  • High charge/discharge cycle life (1200*) and, consequently, longer service life (on average 7-8 years, depending on operating conditions).
  • The battery can be installed in residential premises. The viscous electrolyte structure and complete housing tightness eliminate acid leakage and guarantee the absence of harmful emissions.
  • In practical use, gel batteries show stable results when operating under low (-20°C) and high (+50°C) ambient temperatures. The wide operating temperature range allows using GEL as rechargeable batteries for solar power plants.
  • The manufacturing technology of gel batteries implies the ability of these batteries to withstand prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type feature low self-discharge rates during long-term storage and reliable self-protection against over-discharge and battery overcharging.

Gel Battery Manufacturing Features

The main feature of gel batteries is the viscous (gel-like) electrolyte structure.

Filling the housing with electrolyte is performed using a vacuum pump, which achieves its uniform concentration and high adhesion density to the plates.

Separators separating the lead electrodes of gel batteries are made of a durable microporous material with aluminum additives. Such a design makes the separator resistant to vibrations, mechanical damage, and chemical effects of the aggressive acid environment inside the battery.

After filling with electrolyte, the battery undergoes prolonged drying, during which microcracks form in the electrolyte structure. This technology allows reducing evaporation rates by several times.

Rechargeable batteries manufactured using GEL technology, compared to AGM batteries with equivalent electrolyte volume, have:

  • higher capacity,
  • stably uniform reaction across all parts of the plate,
  • less plate corrosion,
  • high heat dissipation,
  • minimal electrolyte stratification rates.

What is a Gel Battery Needed For?

Universal external gel-type batteries are used:

  • In telecommunication and other communication systems.
  • For equipping video surveillance, security, fire alarm, and other alarm systems.
  • In uninterruptible power supply systems of server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • To provide autonomous or emergency lighting.
  • As batteries for uninterruptible power supply units and UPS.

Which Batteries Are Best for Solar Panels, and Which Battery to Buy for a UPS?

The choice of battery for a SPP depends on the generation volumes of the solar power plant, as well as the required amount of electricity to meet consumption.

An AGM or gel battery for a solar panel must have a sufficient capacity reserve, a wide operating temperature range, and a long service life.

Before deciding which battery is better to buy for a UPS, carefully review the parameters of the uninterruptible power supply and determine the amount of time required for the autonomous operation of electrical equipment.

Gel batteries are in high demand among consumers who purchase backup power sets for a heating boiler, emergency lighting systems, or autonomous water supply.

Before buying batteries for solar panels, uninterruptible power supplies, or other purposes, consult with a specialist:

How to Avoid Battery Capacity Loss During Frequent Power Outages?

Two important maintenance rules for AGM, GEL, MG batteries:

  1. You should not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity)
  2. After discharge, the battery must be fully charged with a current of 1/10 of the capacity for 10 hours

IMPORTANT! If a group of several batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • be from the same batch of the same brand.

Violation of these requirements causes premature failure of one or more batteries and is not a warranty case.

Specifications

Technical Specifications

Nominal capacity, Ah
40
Nominal voltage, V
12
Type
gel
Internal resistance, mOm
7.5
Charging voltage (buffer mode), V
13.5-13.8
Charging voltage (cyclic mode), V
14.4-14.7
Short-circuit current, A
1200
Nominal charging current, A
4
Terminal type
T6 (for M6 bolt)
Number of cycles
1200
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charging temperature, °C
-10 ~ +50
Operating discharge temperature, °C
-15 ~ +50
Length, mm
196
Width, mm
165
Height, mm
173
Height with terminals, mm
173
Warranty, months
18
Weight, kg
12

General Information

Model
Gel Battery LPM-GL 12V - 40 Ah
SKU
6900041540012
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog