DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN

Gel Battery LPM-GL 12V - 250 Ah

SKU 21081

Description

A gel (GEL) rechargeable battery is a completely sealed power source that requires no maintenance during storage and operation.

When considering a gel battery, its advantages and disadvantages, we can conclude that GEL-type batteries significantly outperform standard lead-acid batteries in technical parameters and operational characteristics.

Advantages of the gel battery:

  • High charge/discharge cycle life (1200*) and, consequently, a longer service life (on average 7-8 years, depending on operating conditions).
  • The battery can be installed in residential premises. The viscous electrolyte structure and complete housing hermeticity eliminate acid leakage and guarantee the absence of harmful vapors.
  • In practical use, gel batteries show stable performance when operating under low (-20°C) and high (+50°C) ambient temperature conditions. The wide operating temperature range allows using GEL as storage batteries for solar power plants.
  • The manufacturing technology of gel batteries implies the ability of these batteries to withstand prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
  • Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against over-discharge and overcharging.

Features of gel battery production

The main feature of gel batteries is the viscous (gel-like) electrolyte structure.

Filling the housing with electrolyte is carried out using a vacuum pump, which allows achieving its uniform concentration and high adhesion density to the plates.

The separators separating the lead electrodes of gel batteries are made of durable microporous material with aluminum additives. This design makes the separator resistant to vibrations and mechanical damage, as well as to the chemical effects of the aggressive acid environment inside the battery.

After filling with electrolyte, the battery undergoes prolonged drying, during which microcracks form in the electrolyte structure. This technology allows reducing evaporation % by several times.

Rechargeable batteries manufactured using GEL technology, compared to AGM batteries with the same electrolyte volume, have:

  • higher capacity,
  • stably uniform reaction across all parts of the plate,
  • less plate corrosion,
  • high heat dissipation,
  • minimal electrolyte stratification rates.

What is a gel battery needed for?

Universal external gel-type batteries are used:

  • In telecommunication and other communication systems.
  • For equipping video surveillance, security, burglar, fire, and other alarm systems.
  • In uninterruptible power supply systems of server stations.
  • As a power source for medical, laboratory, commercial, and other specialized equipment.
  • In energy storage systems from alternative sources (batteries for solar panels).
  • To provide autonomous or emergency lighting.
  • As batteries for uninterruptible power supplies and UPS units.

Which batteries are best for solar panels, and which battery to buy for an uninterruptible power supply?

Choosing a battery for a solar power plant (SPP) depends on the generation volumes of the solar power plant, as well as on the required amount of electricity to meet consumption.

An AGM or gel battery for a solar panel must have a sufficient capacity margin, a wide operating temperature range, and a long service life.

Before deciding which battery is better to buy for a UPS, carefully study the parameters of the uninterruptible power source and determine the amount of time required for autonomous operation of the electrical equipment.

Gel batteries are in high demand among consumers who purchase backup power kits for heating boilers, emergency lighting systems, or autonomous water supply.

How to avoid battery capacity loss during frequent power outages?

Two important rules for caring for AGM, GEL, MG batteries:

  1. You should not frequently discharge the battery by more than 30% of its capacity (take this into account when calculating battery capacity)
  2. After discharge, the battery must be fully charged with a current of 1/10 of the capacity for 10 hours

IMPORTANT! If a group of several batteries connected in parallel or series is used, then:

  • all batteries must have the same capacity,
  • be of the same type (AGM, GEL, or MG),
  • have the same voltage, the same number of charge/discharge cycles,
  • be from the same batch of the same brand.

Specifications

Technical Specifications

Nominal capacity, Ah
250
Nominal voltage, V
12
Type
gel
Internal resistance, mOm
2.3
Charging voltage (buffer mode), V
13.5-13.8
Charging voltage (cyclic mode), V
14.5-14.9
Short-circuit current, A
4100
Nominal charging current, A
25
Terminal type
T11 (for M8 bolt)
Number of cycles
1200
Housing material
plastic
Battery storage temperature, °C
-20 ~ +50
Operating charging temperature, °C
-10 ~ +50
Operating discharging temperature, °C
-15 ~ +50
Length, mm
522
Width, mm
268
Height, mm
220
Height with terminals, mm
225
Warranty, months
18
Weight, kg
64.45

General Information

Model
Gel Battery LPM-GL 12V - 250 Ah
SKU
21081
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog