DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Elex Hertz U 36-3/32 v3.0 Voltage Stabilizer1 / 5
114 000 ₴
Out of stock

Elex Hertz U 36-3/32 v3.0 Voltage Stabilizer

SKU 6900163070015

Description

The HERTZ U 36-3/32 v3.0 three-phase voltage stabilizer is designed for operation in electrical networks with voltage fluctuations ranging from 150 to 260V. Within this range, the device is guaranteed to deliver an output voltage within 220±1-1.5%, which is ensured through the use of 36 stabilization stages accordingly. The Hertz power model range includes 16.5, 22.5, 27, 33, 41, and 53 kW, corresponding to operating currents of 25, 32, 40, 50, 63, and 80A per phase.

Features of this stabilizer include a dual LED indicator per phase, a linear load bar, mechanical transit (bypass), floor-standing design, input and output filters for protection against high-frequency interference, and silent operation due to the use of toroidal transformers and thyristor switches.

If it is necessary to obtain an output voltage other than 220V from the Hertz stabilizer, there is a function to adjust this value within the range of 200-230V. In manual mode, the output voltage can be changed in 1V steps. These changes will be applied simultaneously to all phases.

The Hertz stabilizer features manual adjustment of the lower cutoff threshold (60-135V). This function is required for loads with high starting currents, during the startup of which severe voltage sag and emergency shutdown of the stabilizer may occur. When this option is activated, the stabilizer will allow any motor or pump to start within a minute, even during voltage sags down to 60V in the network.

The built-in phase synchronization mode allows for the instant disconnection of three-phase loads, protecting them against voltage interruptions and power loss on one or two phases. This function has manual control and can therefore be disabled at any time. In this case, the phases will operate independently of each other.

It is recommended to install and operate the HERTZ U 36-3/32 v3.0 stabilizer in dry and heated rooms. This device is designed for floor installation. Connection to the existing wiring is made via a terminal block.

Specifications

Technical Specifications

Rated Power, VA/W
22000/22000
Number of Stabilization Stages
36
Stabilizer Efficiency, not lower than %
98
Nominal Output Voltage, V
220
Minimum Operating Input Voltage, V
100
Maximum Operating Input Voltage, V
280
Mains Frequency, Hz
45-65
Forced Cooling
two-speed fan
Weight, kg
75
Operating Current, A
3×32
No-load Power Consumption, not more than W
20
Output Voltage Regulation, V
200-230
Stabilization Accuracy, %
1,5
Input Voltage Change Reaction Time, ms
20
Input Current and Apparent Power Measurement
yes
Short-Circuit and Overload Current Limitation
input automatic circuit breaker with C-characteristic electromagnetic protection
Electronic Bypass
yes
Grid and Stabilizer Status Analyzer
yes
Switch Type
thyristor
Lower Cutoff Threshold Regulation, V
60-135
Overheat Protection
yes
Redundant Overvoltage Protection
yes
Control Microcontroller
yes
Input Choke
yes
Output Choke
yes
Minimum Cable Core Cross-Section for Connection, mm²
6
Maximum Cable Core Cross-Section for Connection, mm²
30
Warranty, months
36
Length, mm
480
Width, mm
310
Height, mm
725

General Information

Model
Elex Hertz U 36-3/32 v3.0 Voltage Stabilizer
SKU
6900163070015
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog