DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Elex Hertz U 16-3/63 v3.0 Voltage Stabilizer1 / 5
110 000 ₴
Out of stock

Elex Hertz U 16-3/63 v3.0 Voltage Stabilizer

SKU 6900163010011

Description

The HERTZ U 16-3/63 v3.0 three-phase voltage stabilizer is designed for operation in electrical networks with voltage fluctuations from 150 to 260V. In this range, the device is guaranteed to deliver an output voltage within 220±2.3-2.5%, which is ensured by using 16 stabilization stages respectively. The Hertz model range in terms of power can be 16.5, 22.5, 27, 33, 41, and 53 kW, which corresponds to an operating current of 25, 32, 40, 50, 63, and 80A per phase.

Features of this stabilizer include a dual LED indicator per phase, a linear load bar, the presence of a mechanical transit (bypass), floor-standing design, input and output filters for high-frequency interference protection, and silent operation due to the use of toroidal transformers and thyristor switches.

If it is necessary to obtain an output voltage other than 220V from the Hertz stabilizer, there is a function to adjust this value in the range of 200-230V. In manual mode, you can change the output voltage with a 1V step. In this case, the changes will apply simultaneously to all phases.

The Hertz stabilizer has the ability to manually adjust the lower shutdown threshold (60-135V). This function is required for loads with high starting currents, during the startup of which a severe voltage drop and emergency shutdown of the stabilizer are possible. When this option is activated, the stabilizer will allow starting any motor or pump within a minute even when the network voltage drops to 60V.

The built-in phase synchronization mode will instantly disconnect the three-phase load, protecting it from voltage interruptions and power loss on the phases (one or two). This function has manual control and therefore can be disabled at any time. In this case, the phases will operate independently of each other.

It is recommended to install and operate the HERTZ U 16-3/63 v3.0 stabilizer in dry and heated rooms. This device is intended for floor-standing installation. Connection is made to the existing wiring via a terminal block.

Specifications

Technical Specifications

Rated Power, VA/W
41000/41000
Number of Stabilization Stages
16
Stabilizer Efficiency not less than, %
98
Rated Output Voltage, V
220
Minimum Operating Input Voltage, V
100
Maximum Operating Input Voltage, V
280
Supply Network Frequency, Hz
45-65
Forced Cooling
dual-speed fan
Weight, kg
86
Operating Current, A
3×63
No-load Power Consumption not more than, W
20
Output Voltage Regulation, V
200-230
Stabilization Accuracy, %
2.3
Input Voltage Change Reaction Time, ms
20
Input Current and Apparent Power Measurement
yes
Short Circuit and Load Current Limiting
input automatic circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass
yes
Network and Stabilizer Status Analyzer
yes
Switch Type
thyristor
Lower Shutdown Threshold Regulation, V
60-135
Overheat Protection
yes
Duplicate Overvoltage Protection
yes
Control Microcontroller
yes
Input Choke
yes
Output Choke
yes
Minimum Cable Core Cross-Section for Connection, mm²
10
Maximum Cable Core Cross-Section for Connection, mm²
40
Warranty, months
36
Length, mm
480
Width, mm
310
Height, mm
725

General Information

Model
Elex Hertz U 16-3/63 v3.0 Voltage Stabilizer
SKU
6900163010011
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog