DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Elex Hertz-PRO U 16-3/125 v3.0 Voltage Stabilizer1 / 5
254 000 ₴
Out of stock

Elex Hertz-PRO U 16-3/125 v3.0 Voltage Stabilizer

SKU 6900163040018

Description

The three-phase voltage stabilizer HERTZ-PRO U 16-3/125 v3.0 is designed for operation in electrical grids with voltage fluctuations from 150 to 260V. Within this range, the device is guaranteed to output a voltage within 220±2.3%, which is ensured by using 16 stabilization stages respectively. The Hertz-PRO model line can have a capacity of 66, 83, and 106 kW, which corresponds to an operating current of 100, 125, and 160A per phase.

Features of this stabilizer include a dual LED indicator per phase, a linear load bar, the presence of a mechanical transit (bypass), floor-standing design, input and output filters for protection against high-frequency interference, and silent operation due to the use of toroidal transformers and thyristor switches.

If it is necessary to obtain an output voltage other than 220V from the Hertz stabilizer, there is a function to regulate this value in the range of 200-230V. In manual mode, the output voltage can be changed in 1V steps. In this case, the changes will apply simultaneously to all phases.

The Hertz-PRO stabilizer has the ability to manually adjust the lower shutdown threshold (60-135V). This function is required for loads with high starting currents, upon startup of which severe voltage sag and emergency shutdown of the stabilizer are possible. When this option is activated, the stabilizer will allow any motor or pump to be started within a minute even with a voltage sag down to 60V in the grid.

The built-in phase synchronization mode will instantly disconnect the three-phase load, protecting it against voltage interruptions and loss of power on phases (one or two). This function has manual control and therefore can be disabled at any time. In this case, the phases will operate independently of each other.

It is recommended to install and operate the HERTZ-PRO U 16-3/125 v3.0 stabilizer in dry and heated rooms. This device is intended for floor installation. Connection is made to existing wiring via a terminal block.

Specifications

Technical Specifications

Rated Power, VA/W
83000/83000
Number of Stabilization Stages
16
Stabilizer Efficiency Not Lower Than, %
98
Rated Output Voltage, V
220
Minimum Operating Input Voltage, V
100
Maximum Operating Input Voltage, V
280
Supply Frequency, Hz
45-65
Forced Cooling
dual-speed fan
Weight, kg
255
Operating Current, A
3×125
No-load Power Consumption Not More Than, W
20
Output Voltage Regulation, V
200-230
Stabilization Accuracy, %
2,3
Input Voltage Change Reaction Time, ms
20
Input Current and Apparent Power Measurement
yes
Short-Circuit and Load Current Limitation
input circuit breaker with C-characteristic electromagnetic protection
Electronic Bypass
yes
Grid and Stabilizer Status Analyzer
yes
Switch Type
thyristor
Lower Shutdown Threshold Regulation, V
60-135
Overheat Protection
yes
Redundant Overvoltage Protection
yes
Control Microcontroller
yes
Input Choke
yes
Output Choke
yes
Minimum Cable Core Cross-Section for Connection, mm²
16
Maximum Cable Core Cross-Section for Connection, mm²
40
Warranty, months
36
Length, mm
780
Width, mm
385
Height, mm
1280

General Information

Model
Elex Hertz-PRO U 16-3/125 v3.0 Voltage Stabilizer
SKU
6900163040018
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog