DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Elex Herts U 16-3/32 v3.0 Voltage Stabilizer1 / 5

Elex Herts U 16-3/32 v3.0 Voltage Stabilizer

SKU 6900162980018

Description

The HERTS U 16-3/32 v3.0 three-phase voltage stabilizer is designed for operation in electrical grids with voltage fluctuations ranging from 150 to 260V. Within this range, the device is guaranteed to deliver an output voltage within 220±2.3-2.5%, which is provided by using 16 stabilization stages respectively. The Herts model lineup by power can be 16.5, 22.5, 27, 33, 41, and 53 kW, which corresponds to operating currents of 25, 32, 40, 50, 63, and 80A per phase.

Features of this stabilizer include a dual LED indicator per phase, a linear load bar, mechanical transit (bypass) availability, floor-standing design, input and output filters for protection against high-frequency interference, and silent operation due to the use of toroidal transformers and thyristor switches.

If it is necessary to obtain an output voltage other than 220V from the stabilizer, Herts provides a function to adjust this value within the range of 200-230V. In manual mode, the output voltage can be changed with a 1V step. In this case, changes will apply simultaneously to all phases.

The Herts stabilizer has the capability of manual adjustment of the lower cutoff threshold (60-135V). This function is required for loads with high starting currents, during the startup of which severe voltage sag and emergency shutdown of the stabilizer may occur. When this option is activated, the stabilizer allows starting any motor or pump within a minute even with a voltage sag down to 60V in the grid.

The built-in phase synchronization mode allows instantly disconnecting the three-phase load, protecting it against voltage interruptions and power loss on the phases (one or two). This function has manual control and therefore can be disabled at any time. In this case, the phases will operate independently of each other.

It is recommended to install and operate the HERTS U 16-3/32 v3.0 stabilizer in dry and heated rooms. This device is intended for floor installation. Connection is made to the existing wiring through a terminal block.

Specifications

Technical Specifications

Rated power, VA/W
22000/22000
Number of stabilization stages
16
Stabilizer efficiency not lower, %
98
Rated output voltage, V
220
Minimum operating input voltage, V
100
Maximum operating input voltage, V
280
Supply frequency, Hz
45-65
Forced cooling
dual-speed fan
Weight, kg
75
Operating current, A
3×32
No-load power consumption not more, W
20
Output voltage adjustment, V
200-230
Stabilization accuracy, %
2.5
Response time to input voltage change, ms
20
Input current and apparent power measurement
yes
Short-circuit and overload current limitation
input circuit breaker with C-curve electromagnetic protection
Electronic Bypass
yes
Grid and stabilizer status analyzer
yes
Switch type
thyristor
Lower cutoff threshold adjustment, V
60-135
Overheating protection
yes
Redundant overvoltage protection
yes
Control microcontroller
yes
Input choke
yes
Output choke
yes
Minimum cable core cross-section for connection, mm²
6
Maximum cable core cross-section for connection, mm²
30
Warranty, months
36
Length, mm
480
Width, mm
310
Height, mm
725

General Information

Model
Elex Herts U 16-3/32 v3.0 Voltage Stabilizer
SKU
6900162980018
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog