DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Elex Gertz-PRO U 36-3/125 v3.0 Voltage Stabilizer1 / 5
294 000 ₴
Out of stock

Elex Gertz-PRO U 36-3/125 v3.0 Voltage Stabilizer

SKU 6900163140015

Description

The three-phase GERTZ-PRO U 36-3/125 v3.0 voltage stabilizer is designed for operation in electrical grids with voltage fluctuations ranging from 150 to 260 V. Within this range, the device is guaranteed to deliver an output voltage within 220±1%, achieved through the use of 36 stabilization stages accordingly. The Gertz-PRO model series is available in power ratings of 66, 83, and 106 kW, corresponding to operating currents of 100, 125, and 160 A per phase.

Features of this stabilizer include a dual LED indicator per phase, a linear load bar, a mechanical bypass, floor-standing installation, input and output filters for high-frequency interference protection, and silent operation utilizing toroidal transformers and thyristor switches.

If an output voltage other than 220 V is required, Gertz provides a regulation function within the 200–230 V range. In manual mode, the output voltage can be adjusted in 1-V increments, with changes applied simultaneously to all phases.

The Gertz stabilizer features manual adjustment of the lower disconnect threshold (60–135 V). This function is required for loads with high starting currents, where startup may cause severe voltage sag and trigger an emergency shutdown of the stabilizer. When this option is activated, the stabilizer allows any motor or pump to start within a minute, even during voltage sags down to 60 V in the grid.

The built-in phase synchronization mode allows for the instantaneous disconnection of three-phase loads, protecting them against voltage interruptions and power loss on one or more phases. This function features manual control and can be disabled at any time, in which case the phases operate independently of each other.

Installation and operation of the GERTZ-PRO U 36-3/125 v3.0 stabilizer are recommended in dry and heated indoor spaces. This unit is designed for floor-standing installation. Connection to existing wiring is carried out via a terminal block.

Specifications

Technical Specifications

Nominal Power, VA/W
83000/83000
Number of Stabilization Stages
36
Stabilizer Efficiency not lower than, %
98
Nominal Output Voltage, V
220
Minimum Operating Input Voltage, V
100
Maximum Operating Input Voltage, V
280
Supply Grid Frequency, Hz
45-65
Forced Cooling
two-speed fan
Weight, kg
255
Operating Current, A
3×125
No-Load Power Consumption not exceeding, W
20
Output Voltage Regulation, V
200-230
Stabilization Accuracy, %
1
Input Voltage Response Time, ms
20
Input Current and Apparent Power Measurement
yes
Short Circuit and Overload Current Limiting
input circuit breaker with C-curve electromagnetic protection
Electronic Bypass
yes
Grid and Stabilizer Status Analyzer
yes
Switch Type
thyristor
Lower Disconnect Threshold Regulation, V
60-135
Overheating Protection
yes
Redundant Overvoltage Protection
yes
Control Microcontroller
yes
Input Choke
yes
Output Choke
yes
Minimum Cable Conductor Cross-Section for Connection, mm²
16
Maximum Cable Conductor Cross-Section for Connection, mm²
40
Warranty, months
36
Length, mm
780
Width, mm
385
Height, mm
1280

General Information

Model
Elex Gertz-PRO U 36-3/125 v3.0 Voltage Stabilizer
SKU
6900163140015
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog