DLM — Electronics, Tools & Home Store

Categories

Categories currently unavailable.

Open catalog
Language
UAEN
Daly LiFePO4 8S BMS Board 24V [DL8S24V60A] (max. 29.2V)1 / 2
965 ₴
In Stock
1

Daly LiFePO4 8S BMS Board 24V [DL8S24V60A] (max. 29.2V)

SKU DL8S24V60A

Description

Daly LiFePO4 8S 24V 60A BMS Board (Symmetric Port)

A reliable and high-performance BMS protection board from the leading brand Daly, designed to provide comprehensive safety and durability for 24V (8S) battery systems. This model is engineered specifically for lithium iron phosphate cells (LiFePO4 with a nominal cell voltage of 3.2V).

Daly 8S 60A BMS is an ideal choice for building medium-power energy storage systems: solar power stations, uninterruptible power supplies (UPS) for home or office, floor cleaning machines, electric boat motors, electric quad bikes, and golf carts.

Key Features and Benefits:

* Symmetric Port (60A / 60A): Charge and discharge currents pass through the same power cables (P and B ports). This significantly simplifies the general wiring scheme, makes it cleaner, and reduces the likelihood of assembly errors.
* IP67 Ingress Protection: The board enclosure is made of durable signature red plastic and is fully potted with a waterproof, thermally conductive compound. The board is protected from dust, heavy water splashes, condensation, and mechanical vibrations, allowing the battery to be used in harsh environments (e.g., water transport or unheated rooms).
* Multi-Level Intelligent Protection: The BMS continuously monitors the status of each individual cell. Protective algorithms instantly trigger in case of emergency modes:
* Cell overcharge (cutoff upon exceeding critical threshold).
* Cell over-discharge (protection against deep discharge that damages LiFePO4 chemistry).
* Short circuit and overcurrent.
* Battery overheating (via external NTC temperature sensor).
* Built-in Passive Balancing: During the final charge stage, the BMS automatically engages passive balancers with up to 35mA current for cells that charged faster than others. This allows lagging cells to reach full charge, balances overall pack capacity, and prevents premature cell wear.

Manufacturer: Daly BMS
Battery Chemistry Type: LiFePO4 (nominal cell voltage 3.2V)
Number of Cells in Series (S): 8S (nominal voltage 25.6V / maximum 29.2V)
Overcharge Voltage Threshold (cell): 3.75 ± 0.05V
Over-discharge Voltage Threshold (cell): 2.50 ± 0.1V
Maximum Continuous Discharge Current: 60A
Maximum Continuous Charge Current: 60A (symmetric port)
Passive Balancing Current: 35 mA
Temperature Protection (NTC): Yes (shutdown on overheating)
Dimensions: ~ 80×61×12 mm

Strictly follow the step-by-step procedure:

1. First, securely solder or bolt the thick blue wire B from the BMS board to the general negative terminal of the battery pack.
2. Take the balancing harness separately from the board (without plugging its white plastic connector into the BMS socket).
3. Solder the thin black wire of the harness (first in the row) to the general negative of cell #1 (point B). Then sequentially solder the colored wires to the cell positives: the first colored wire to the positive of cell #1 (B1), the second to the positive of cell #2 (B2), and so on up to the last wire (B8), which mounts to the total positive of the entire battery.
4. Take a multimeter and measure the voltages directly on the harness connector pins: voltage should rise smoothly and evenly from the first pin to the last (approximately 3.2V – 3.6V per step).
5. Only after verifying correct pinout, carefully and tightly plug the harness connector into the BMS board.
6. Connect the load (inverter, motor) and charger to the total positive of the battery and the power black wire P exiting the BMS.

Specifications

Technical Specifications

Nominal Voltage
24 V
Protection Rating
IP67
Additional Specifications
Discharge 60A; Charge 60A; Balance 35mA; NTC; TEMP control; Common Port (symmetric)

General Information

Model
Daly LiFePO4 8S BMS Board 24V [DL8S24V60A] (max. 29.2V)
SKU
DL8S24V60A
Condition
New (Original factory package)
Warranty
Official manufacturer warranty

Delivery & Payment

Nova Poshta delivery across Ukraine

Dispatch to post branches, parcel lockers, or by courier to your doorstep. All packages are insured for 100% of value. Delivery time: 1–3 business days.

Payment & Pick-up

Flexible options: Cash on delivery at Nova Poshta branch or bank transfer invoice (IBAN) for individuals, FOP and companies.

Shopping Cart

0 items

Your cart is empty

Add items from the catalog to place an order.

Explore Catalog